136,420 used machines on RESALE, but how to find them? Machine Search
\"1. Combination unit rubber roller with electric sanding shoe (function not tested) 2. Shoe power unit Cleaning brush incl. rigid sanding shoe for solid wood pulp Grinding width max.: 1100 mm Sanding belt dimensions: 2150x1130 mm Carpet feed speed: infinitely variable Sanding belt speeds per unit: 1 aggregate: 18 m/sec - 2 units: 2 speeds Roller table at the inlet and outlet incl. vacuum + vacuum blower Total connected load: 33.4 Kw SALE WITHOUT WARRANTY! Data are taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: it is expressly pointed out that this lot only corresponds to the scope of the product description. If objects can be seen in the photo that are not expressly listed in the lot description, they are not part of the sale. Of course, this also applies to tools, additional equipment, accessories, software ...
Machine ready for transport Auction-ID: A1-48648-4
grinding diameter: 750 mm grinding length: 5400 mm centre height: 375 mm max. workpiece diameter: 750 mm workpiece weight: 10000 kg table - swivable +/-: - ° grinding wheel size: 750/650 x 75 x 305 mm grinding wheel turining speeds: 750 U/min turning speed range - workpiece: 14,5 - 86 U/min main drive motor: 15 kW workpiece drive: 7,5 kW feeds - fine adjustment: 0,00635 - 0,0508 mm/min total power requirement: - kW weight of the machine ca.: 27 t dimensions of the machine ca.: 13,5 x 3,4 m Refurbished 2023 and equipped with: - DRO - Table swivable - 9 x steadies - Coolant/Filtration Tank Machine has had over 85000,-€ of retrofit work in 2023 including: -- replacement of air bearing liners -- 7 x steadies fully overhauled -- Overhaul of top table & centre heights of workhead & tailstock -- New electrical wiring & cabinet The data for this ad was created with ModulMWS - the software s ...
: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 € : 122.59 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 € : 149.25 € : 1 : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary type ...
: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...
grinding length: 300 mm grinding width: 500 mm workpiece height: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: SAACKE Model No.: UWIE Year: 2003 Condition: Used Stock No: 9484 Switch-on hours: 134460 h Hours: 15884 h X-axis travel: 340 mm Travel Y: 240 mm Travel distances Z-axis: 840 mm Maximum spindle speed: 10000 1/min Machine height: 2090 mm Machine length: 2450 mm Machine width: 2050 mm Machine weight: 3900 kg
Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!
Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!
Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!
Key data: 1600 mm, 880 mm
CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right
Key data: 1600 mm, 880 mm
CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right
ARMLÄNDER Polishing/Buffing Machine Auction-ID: A1-49712-15
ARMLÄNDER Polishing/Buffing Machine Auction-ID: A1-49712-2
General Description CNC profile and tool & cutter grinding machine manufactured by KELCH , model PFS 30-CNC . Designed for precision grinding of cutting tools, profiles and special tooling. The machine is equipped with CNC-controlled axes, a precision grinding spindle and a tilting workhead for versatile grinding applications. Technical Details Manufacturer: KELCH Model: PFS 30-CNC Machine type: CNC profile and tool & cutter grinding machine CNC-controlled axes Control: Bosch CNC Alpha with Bosch Alpha CRT Digital readouts: Heidenhain Control panel manufactured by Präzisionstechnik GmbH Tilting workhead Precision grinding spindle Precision workholding fixture Coolant enclosure Dust/coolant extraction system Condition Used industrial condition. The machine appears complete with Bosch CNC control, Heidenhain digital readouts, tilting workhead, precision grindi ...
MACRYL grinding/polishing machine type MAC 2.1 with large work table and separate control panel Including FEZER vacuum pump, vacuum accessories and connected extraction system Technical data Manufacturer: MACRYL / A. Wolf Maschinen GmbH Type: MAC 2.1 Engine No.: 611 24 Year of construction: approx. 1991 Electrical connection: approx. 380 V / 50 Hz Compressed air connection: approx. 6 bar Separate control panel Emergency stop Suction connection available Vacuum system available Machine dimensions (L × W × H): approx. 3,200 × 1,500 × 1,300 mm Weight: approx. 700–1,000 kg FEZER Vacuum Pump Manufacturer: FEZER Type: approx. 016-118 Vacuum: approx. 20 mbar Oil capacity: approx. 0.5 l Engine oil: SAE 30 Vacuum pressure gauge available Vacuum hoses available Auction-ID: A1-49712-10
max. grinding diameter: 175 mm grinding length: mm workpiece length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 450 mm, 200 mm
Surface grinding machine, used, Grinding area: 450x200x250mm, with magnetic plate, puller, holders, coolant device, ...
Internal cylindrical grinding machine, Tripet Swiss, 1991, Grinding slide. 0.5 - 30mm, Grinding depth: 50, Center height: 102, Axles: Z , Y, U, B, V, , autom. Chuck, ...
Tip height: 100 mm Center width: 500 mm Grinding wheel diameter: 300 mm Max. speed grinding wheel 2,825 min-1 Rotatable grinding head 90° left and right Max. workpiece speed: 750 min-1 Spindle cone MK 4 Tailstock 3-jaw abrasive chuck 125 mm Face Plate 160 mm Collet chuck ER 40 with collet set 28 pcs. Fixed grain tip Grinding wheel flange with grinding wheel Wet grinding equipment
Drill Bit Grinding Machine Grinding range 2 - 20 mm Acute angle min./max. 90 - 135 degrees Connected load 230 V Machine weight approx. 8.6 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A7-49782-502
Machine number: 7318 Operating voltage: 380 V Frequency: 50 Hz Rated current: 15 A Magnet dimensions: 510 x 200 mm Table dimensions: 720 x 200 mm with three grooves Grinding wheel diameter: 220 mm Reference: Teck Tech - Lot 5 Auction-ID: A7-49056-174
This grinder is ideal for regrinding tools such as face milling cutters, drills, TIG welding needles and much more. comes standard with: Accessories for lathe tools Accessories for drills Accessories for milling 5C Spring Collet (4-6-8-10-12 mm) Clutch wrench 38-42 Grinding wheel wrench Allen key M3-M8 Screwdriver Diamond grinding wheel Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond Pen Spring Collet: 3/16\" - 5/16\" - 3/8\" - 1/2\" Grinding range 3 -28 mm Angle adjustable from - to horizontal 0-180 degrees Angle adjustable from - to vertical 0-45 degrees Angle adjustable from - to negative 0-52 degrees Clamping range 3 - 28mm mm Speed 5200 rpm Connected load 230 / 250 volts / watt Disc diameter 100 x 50 x 20 mm Machine weight approx. 45 kg Dimensions L x W x H 0.5 x 0.4 x 0.4 m Condition: never used / new (5) Auction-ID: A7-49782-407
Saw blade grinding machine with: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and quiet operation - Spacers for different saw blade holes Without saw blade Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 rpm Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m Condition: never used / new (5) Auction-ID: A7-49782-422
Overhaul 2026 magnetic table dimensions: 800x300 mm Auction-ID: A7-49398-49
All interested parties are invited to carefully read the attached notice of sale, the inventory of goods and the take-away conditions, as they contain essential information relating to the methods of participation, the requirements, the characteristics of the lots and the obligations provided for the collection of the goods. The submission of an offer implies the full acceptance of the attached documentation. Participation in this lot requires the payment of a deposit equal to 10% of the starting price. For information: matteo.tosin@surplex.com Composed of: Giuseppe CARCANO Tester Grinding machine Grinding machine Plastic hole drilling machine Electa Lapidello Automatic lathe Delta LC400 Lapidello Metal shelving Casting oven Grinding machine Grinding machine Grinding machine Automatic leveling machine Vertical drill CECCATO Screw Air Compressors with Tank, Filters and Dehumid ...
Serial number: 815 Operating voltage: 380 V Frequency: 50–60 Hz Rated current: 14 A Table dimensions: 500 x 200 mm Universal part-head tip height: 170 mm Tailstock tip height: 120 mm (with intermediate support: 170 mm) Max. workpiece length between tips: 336 mm Workpiece diameter with cantilevered fastening: approx. 600 mm Max. tip length: 950 mm Inner cone Partial spindle: Morse 4 / Unified 40 T-slots: 12 mm (machine stand), 8 mm (other elements) Sharpening stroke: 190 mm Transverse movement Tool holder: 100 mm Vertical movement Grinding head: 325 mm Tool holder: 230 mm Divider on tool slide: 330 mm Grinding head bracket / tool holder / grinding head / universal apparatus: 360° Three-phase motor: 0.7 / 0.85 kW DC motor: 1.3 kW Spindle speed: 4000 / 8000 rpm (double priority) Infinitely variable DC: 2000 – 10000 rpm Incl. two-axis digital display Extensive accessories to match the ...
Machine number: 2036 Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 10 A Connection: 2 kW Grinding media diameter: max. 125 mm Speed: 2000–10000 rpm Table dimensions: 500 x 200 mm Part head tip height: 170 mm Tailstock tip height: 120 mm (with intermediate support: 170 mm) Workpiece diameter between tips: 338 mm Workpiece diameter cantilevered: 600 mm Length between tips: 950 mm Inner taper Partial spindle: Morse 4 / Unified 40 T-slots Machine stand: 12 mm T-slots Other elements: 8 mm Sharpening stroke: 190 mm Transverse movement Tool holder: 100 mm Vertical adjustment Grinding head: 325 mm Axial grinding spindle adjustment: 5 mm Tool holder: 230 mm Grinding head bracket: 800 mm Dividing head on tool slide: 330 mm Grinding head bracket: 360° Grinding heads: 360 °Tool holder: 360° Universal apparatus (horizontal/vertical): 360° Spiral sharpening/chipping Pitches: 0.80 ...
General Description Universal external cylindrical grinding machine manufactured by ELLENBERGER . Designed for precision external cylindrical and tapered grinding of shafts, mandrels and other rotational workpieces in toolrooms and production environments. Technical Details Manufacturer: ELLENBERGER Machine type: Universal external cylindrical grinding machine Workhead Tailstock Grinding wheel installed Grinding wheel guard Hydraulic table drive system Siemens electrical component fitted on the workhead Coolant system Lubrication system Condition Used industrial condition. The machine appears complete with workhead, tailstock, grinding wheel, hydraulic system and coolant/lubrication systems installed. The guideways appear clean with no obvious impact damage. Operational status, spindle condition and grinding accuracy have not been tested. Auction-ID: A7-49124-47
CNC Control: Siemens Sinumerik Machine length: 5,000 mm Machine width: approx. 2,400 mm Weight: approx. 14,500 kg Tip height: 360 mm Maximum grinding diameter: 715 mm Maximum grinding length: 2,000 mm X-axis travel: 500 mm X-axis speed: 0.01 to 15,000 mm/min X-axis measurement resolution: 0.0001 mm Z-axis travel: 2,700 mm Z-axis speed: 0.01 to 15,000 mm/min Z-axis measurement resolution: 0.0001 mm B-axis travel: 280° B-axis speed: 3,600°/min B-axis resolution: 0.00005° Orientation of the external grinding spindle: right, from 0° to 30° Maximum wheel diameter: 610 mm Grinding spindle power: 15 kW Peripheral speed: 50 m/s Workpiece Spindle Speed Range: 1 to 450 RPM Workpiece spindle power: 4.2 kW Torque: 90 Nm Inner cone: MK 6 Tip diameter: 92 mm Maximum cantilevered workpiece weight: 500 kg Maximum workpiece weight between spikes: 650 kg Taper of the tails ...
KENT KGS-63AHD Hydraulic Surface Grinding Machine Type: Hydraulic surface grinding machine Manufacturer: Kent Industrial Co., Ltd. Country of manufacture: Taiwan R.O.C. Model: KGS-63AHD, to be confirmed Control type: Conventional / automatic hydraulic surface grinder Table size: 600 x 300 mm Longitudinal table travel: 710 mm Cross feed travel: 340 mm Distance from spindle centre to table: 600 mm Table load including magnetic chuck: 420 kg Grinding wheel size: 355 x 38 x 127 mm Spindle motor: 3.7 kW Voltage: 380 V Phase: 3 phase Frequency: 50 Hz Total power: approx. 6 kW, to be confirmed Machine height: approx. 1,830 mm Floor space / overall footprint: approx. 2,600 x 2,500 mm Machine dimensions: approx. 2,600 x 2,200 x 1,830 mm Net weight: approx. 1,750 kg Gross weight: approx. 2,200 kg Condition: Used This item is delivered loaded on truck. ...
Make: ELB-SCHLIFF Type SWR -60 NC Year of Make: 1982 Control: conventional Location: Velen-Ramsdorf (46342) Origin: Germany Shipping time: immediately Freight base: ex stock Description: Surface Grinding Machine - Magnetic plate - Coolant system - Belt filter system Grinding length 600 mm Grinding width 350 mm Table clamping area 900 x 300 mm Grinding wheel dimensions 400 x 50 x 127 mm Table height above floor mm Magnetic Plate 600 x 300 mm Grinding spindle speed 3000 rpm Machine weight approx. 2.5 t Space requirement approx. 3.0 x 2.0 x 2.2 m Auction-ID: A7-49782-402
Center height: approx. 150 mm Center length: approx. 800 mm Reference: Hercegfi - Lot 112 Auction-ID: A7-49056-161
General Description Horizontal spindle surface grinding machine, model FG251 , designed for precision grinding of flat surfaces on tool steel, hardened components and precision mechanical parts. The machine is equipped with a hydraulic reciprocating table and automatic table reversing for efficient surface grinding operations. Technical Details Model: FG251 Machine type: Horizontal spindle surface grinding machine Horizontal grinding spindle Vertical wheel-head feed Hydraulic longitudinal table movement Manual cross feed Automatic table reversing Speed/feed selector panel Lubrication system with original lubrication diagram Integrated hydraulic and electrical cabinet in the rear column Approximate table travel: 700–900 mm Approximate table width: 200–250 mm Condition Used industrial condition. The machine appears complete with grinding spindle, hydraulic table dr ...
Technical data Manufacturer: Gebr. Mägerle A.G., Uster / Switzerland Type: F 10 Configuration Conventional surface grinding machine with a long movable work table. Magnetic clamping plate available. Vertically adjustable grinding head. Manual handwheels and controls for the axis movements. Separate control unit with emergency stop. Hydraulic equipment available; Controls for hydraulic pump and fan motor. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-162
General Description External cylindrical grinding machine designed for precision grinding of cylindrical and tapered workpieces. Suitable for machining shafts, mandrels and other rotational components requiring high dimensional accuracy and fine surface finish. Technical Details Machine type: External cylindrical grinding machine Workhead Tailstock Grinding wheel and wheel guard Hydraulic table drive system Coolant system Electrical control cabinet Condition Used industrial condition. The machine appears complete with workhead, tailstock, grinding wheel, hydraulic system, coolant system and electrical cabinet installed. Operational status, spindle condition and grinding accuracy have not been tested. Auction-ID: A7-49124-43
All interested parties are invited to carefully read the attached notice of sale, the inventory of goods and the take-away conditions, as they contain essential information relating to the methods of participation, the requirements, the characteristics of the lots and the obligations provided for the collection of the goods. The submission of an offer implies the full acceptance of the attached documentation. Participation in this lot requires the payment of a deposit equal to 10% of the starting price. For information: matteo.tosin@surplex.com Lot consisting of: Ghielmi - Forming press - 1995 Komage K15 Press Komage K15 Press Giacoletto Hydraulic press CIEM Hydraulic press Hydraulic press 350 Ton Hydraulic press 350 Ton GHIELMI Hydraulic press GATTI PGAS150 Hydraulic press 2000 CARCANO 60TON Hydraulic press Plastic drilling machine Hole filler Grinding machine Grinding machin ...
General Description Universal cylindrical grinding machine of Soviet manufacture, exported by Stankoimport, Moscow, USSR . Designed for precision external cylindrical, tapered and thread grinding of shafts, mandrels and other rotational components. The machine is equipped with a universal workhead, tailstock, wheel dresser and coolant system. Technical Details Machine type: Universal cylindrical grinding machine Origin: USSR Exporter: Stankoimport, Moscow Grinding wheel speeds: 1,440 / 1,680 / 2,010 / 2,360 rpm Grinding wheel peripheral speeds: Approx. 30 / 35 / 42 / 50 m/s (400 mm wheel) Universal workhead Tailstock Grinding wheel dresser Coolant system Automatic and manual operating modes Metric, inch and module thread grinding capability Thread grinding/change gear chart Condition Good used industrial condition. The machine appears mechanically complete with workh ...
General Description Universal external cylindrical grinding machine manufactured by WMW Glauchau (former East Germany). Designed for precision external cylindrical and tapered grinding of shafts and other rotational workpieces. The machine is equipped with a universal workhead, tailstock, hydraulic table feed and coolant system. Technical Details Manufacturer: WMW Glauchau Machine type: Universal external cylindrical grinding machine Year: Not confirmed Grinding wheel: Ø 315 mm Maximum grinding wheel speed: 1,800 rpm 315 mm 3-jaw chuck included Universal workhead Tailstock Hydraulic longitudinal table feed Grinding wheel dresser Wheel guard Coolant tank and coolant system Manual and powered controls Condition Fair to average used industrial condition. The machine appears mechanically complete with workhead, tailstock, 315 mm chuck, grinding wheel, hydraulic table f ...
Technical details Model: ШУ 322.21 (SHU 322.21) Type: CNC cylindrical grinding machine Configuration: - External cylindrical grinding spindle - Powered workhead - Tailstock with centre support - Hydraulic table movement - Automatic wheel feed - Swivelling wheelhead - Digital programmable controller - Operator control pendant - Separate electrical cabinet - Coolant system with filtration unit - Integrated hydraulic system Application: - External cylindrical grinding - Precision shaft grinding - Roller and pin grinding - General precision grinding operations Construction: - Heavy-duty cast-iron machine frame - Hydraulic table drive - Semi-automatic grinding cycles Estimated capacity: - Grinding diameter: Approx. 320 mm - Distance between centres: Approx. 1000–1500 mm Dimensions: - Length: Approx. 4200 mm - Width: Approx. 2100 mm - Height: Approx. 2100 mm ...
Grinding range 2 - 13 mm Sharpening angle min./max. 90 - 140 degrees Connected load 230 V Machine weight approx. 10 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A7-49782-489
This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details.
ELB-Schliff SWB 015 VA II Surface Grinding Machine Type: Hydraulic surface grinding machine Manufacturer: ELB-Schliff Model: SWB 015 VA II Serial No.: 696710 Control type: Conventional / hydraulic Grinding length: approx. 1500 mm Grinding width: approx. 500 mm Table size: approx. 1500 x 500 mm Grinding wheel size: approx. Ø350 x 30 x Ø127 mm Table type: Magnetic grinding table Machine configuration: Horizontal spindle surface grinder Condition: Used This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49190-25
grinding length: - mm grinding width: 600 x 2000 mm workpiece height: - mm Control: - table surface area: ca. 600 x 2400 mm x-travel: 2100 mm y-travel: 550 mm z-travel: 560 mm max. dia. of grinding wheel: 400 mm total power requirement: kW weight of the machine ca.: ca 7,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
250 € 
