automatic grinding machine used for sale

Stock number: F1066, In stock: Yes, Amount in stock: 1 pc., Item: Labeling machine, Label size: Max height 160 mm, Label placement: For the side, Packaging form: Cylindrical, square or oval, Conveyor: Lamellar band L 1950 x W 83 mm, Other: Rectifier station - Top band

Stock number: F1024, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Labelling machine, Label size: Max H 250 mm, Label placement: For top/side mounting of labels, Conveyor: Belt conveyor L 1300 x W 300 mm, Type: Serie 1000

Stock number: F956, In stock: Yes, Amount in stock: 1 pc., Item: Carton sealing machine, Construction: Semi automatic carton sealing machine, Product size: Max W 540 x H 620 mm, Tape: For top and bottom tape

Stock number: F839, In stock: Yes, Amount in stock: 1 pc., Item: Stretch wrapping machine, Construction: For wrapping of pallet goods in foil, Roll size: Max W 500 mm, Round plate: Ø 1600 mm, Other: Excl. ramp

Stock number: F177, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Stretch film packing machine, Construction: Bandarole welds/tightens with automatic insertion

Stock number: D747, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese washing machine, Standing: On legs with wheels, Motor: 0,37 kW - with beltdrive, Brush width: 350 mm

Stock number: D567, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese washing machine, Standing: On legs with wheels, Brush width: 410 mm, Other: Excl. renovation

Stock number: D375, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Shaking machine, Standing: In stainless cabinet, Head: Two-headed, Other: For pipettes/test tubes

Stock number: D305, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Continuous aeration foam mixer, Standing: 4 pcs wheels, Construction: Rack with closed stainless panels, Capacity: 1.5-9 l/min, Power: Approx. 7 kW, Voltage: 220/380 Volt, Rotor speed: 175-465 RPM, Other: Computer controlled

Stock number: DT067, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Construction: Manuel, Stations: 1 pc.

Stock number: DT055, In stock: Yes, Amount in stock: 2 pcs., Item: Tablet compressing machine, Theoretical capacity: 760-1520 pcs/min, Stations: 27 pcs. for two-layertablets, Tablet size: Ø 15,8 mm, Working pressure: 6,5 ton, Other: The machine has been renovated

Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a machining process in which two surfaces are rubbed together with an abrasive between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called grinding), involves rubbing a brittle material such as glass against a surface such as iron or glass itself (also known as the lap or grinding tool) with an abrasive such as aluminum oxide, jewellers rouge, opticians rouge, emery, silicon carbide, diamond, etc., between them. This produces microscopic conchoidal fractures as the abrasive rolls about between the two surfaces and removes material from both., The other form of lapping involves a softer material such as pitch or a ceramic for the lap, which is charged with the abrasive. The lap is then used to cut a harder mate ...

T-Type Boring Machine SAN ROCCO - FMC 110 CNC - Spindle Ø 110 mm, capacity 2100x1600x1600+600 mm - CNC HEIDENHAIN TNC 426, , Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1300x1100 mm, Maximum table load: 3.000 Kg, Cross travel x axis: 2100 mm, Vertical travel y axis: 1600 mm, Longitudinal travel z axis: 1600 mm, Longitudinal spindle travel w axis: 550 mm, Working feed x-y-w axes: 2 - 10.000 mm/1, Rapid feed x-y-w axes: 10.000 mm/1, Spindle taper: 50-DIN2080 ISO, Spindle speed: 5 - 3000 rpm, Number of spindle speeds: 2, Spindle motor power: 25 Kw, Cnc: HEIDENHAIN TNC 426 CA, Weight: 17.000 Kg, Accessories: Coolant thrugh spindle, external perimeter guard, CE Mark

Universal precision milling machine ALCOR 220 - Capacity 750x450x545 mm, Digital read-out system, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1000x450 mm, Longitudinal travel x axis: 750 mm, Cross travel y axis: 450 mm, Vertical travel z axis: 545 mm, Spindle taper: 40 ISO, Spindle speed: 38 - 2010 rpm, Number of spindle speeds: 18, Spindle motor power: 4 Kw, Quill spindle travel: 60 mm, Working feed x-y axes: 3 - 3000 mm/1, Working feed z axis: 1 - 1000 mm/1, Rapid feed x-y axes: 3000 mm/1, Rapid travel z axis: 1000 mm/1, Number of working feeds: stepless by DC motor, Weight: 3.500 Kg, Accessories: DRO, coolant.

Universal precision milling machine ALCOR 220 Plus - Capacity 1000x450x545 mm, Digital read-out system, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1400x450 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 450 mm, Vertical travel z axis: 545 mm, Spindle taper: 40 ISO, Spindle speed: 38 - 2010 rpm, Number of spindle speeds: 18, Spindle motor power: 4 Kw, Quill spindle travel: 60 mm, Working feed x-y axes: 3 - 3000 mm/1, Working feed z axis: 1 - 1000 mm/1, Rapid feed x-y axes: 3000 mm/1, Rapid travel z axis: 1000 mm/1, Number of working feeds: stepless by DC motor, Weight: 3.500 Kg, Accessories: DRO, coolant, power draw-bar

Band Sawing Machine MEP SHARK 281, Information about technical data are not binding., Machine available subject to prior sale., Max cutting capacity Ø: 250 mm, Max cutting capacity: 280x200 mm, Blade dimension: 2950x27x0,9 mm, Band speed range: 36 - 72 m/1, Blade motor power: 1,5 - 1,8 Kw, Working plane height: 950 mm, Weight: 370 Kg

Engraving Machine PEAR PF/5N, Information about technical data are not binding., Machine available subject to prior sale., Working scale: 1:1,5 - 1:1,7, Dimensions number: 3, Models table dimensions: 650x450 mm, Working table size: 450x300 mm, Spindle speed: 380 - 16.000 rpm, Spindle motor power: 0.7 Kw, Weight: 1.000 Kg

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

M.Bäuerle CAS 52 overpass; cleaned and tested; suitable for folding machine CAS 52; Working width 520mm. M.Bäuerle CAS 52 bridge; cleaned and checked; used for folding machine CAS 52; working width 520mm.

MITSUI SEIKI HR6A CNC machining center was built in 1984 in Japan by MITSUI SEIKI KOGYO CO., LTD. The machine is designed for precision milling, threading and boring of oversized workpieces with a maximum weight of 2 tonnes. All these machining processes are performed fully automatically, thanks to the use of an automatic pallet exchange system. This system allows workpieces to be loaded and unloaded simultaneously during machining, thus increasing production efficiency and significantly reducing machine downtime. The pallets are transported by a stable cast iron saddle on bed’s hardened and ground guideways. Movement of the X,Y,Z axes is performed on hardened and ground slideways. These ensure that the geometry of the axes remains constant, even when moving to end of their travels. All moving components, in turn, have Turcite B coated bearings, which ensure low friction and high vi ...

Inv. Num. : 8487 Type: ENSIS 3015 AJ Producer: AMADA Created: 2019 Parameters: Maximum power: 6 kW Switch-on hours: 19,588 h Operating hours: 10,631 h Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg

x-travel: 630 mm y-travel: 800 mm z-travel: 750 mm control: SIN 840D sl Siemens B - axis: 360 x 0,001 ° A - axis: -200 -- +25 x 0,001 ° spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 100 % load: 28,00 kW power capacity at 40 % load: 34,00 KW max. torque at 40% / 100% load: 110 / 84 Nm tool taper: HSK 63 feed X/Y/Z/-axis: 1 - 100.000 mm/min rapid traverse X/Y/Z: 100,00 m/min feed capacity X/Y/Z: 9 / 6 / 9 kN feed B-axis: 1 - 14.400 °/min feed A-axis: 1 - 7.200 °/min size of pallet: 2x 500 x 500 mm workpiece weight max.: 400 kg max. workpiece diameter: 800 mm workpiece height max.: 800 mm tool magacine with: 63 diameter of tools max.: 280 mm tool length - max.: 550 mm weight of tools max.: 15,00 kg total power requirement: 65,00 kW weight of the machine ca.: 14,00 t dimensions of the machine ca.: 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERI ...

bore capacity in steel (diameter): 55 mm arm length: 2005 mm workpiece height max.: 1500 mm table-size: 1500 x 800 mm spindle taper MT: 5 spindle turning speed range: 30-1200 U/min feed range: 0,06 - 1,0 mm/U crossrail adjustment horizontal: 495 - 2.000 mm crossrail adjustment vertical: 505 - 1670 mm spindle stroke: 310 mm column diameter: 360 mm distance spindle/base plate: 825 - 1670 mm power requirement: 4,4 kW voltage: 400 V total power requirement: 7,2 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,00 x 0,80 x 2,80 m - Pole-changing motor with 2 speeds - right / left rotation - machine light - Cube table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens 840D Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Speed 4,500 min-1 8-speed revolver Conveyor

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement

used to cut cabbage heads for sauerkraut production,, diameter of the cutting discs: 800 mm,

Manufacturer: JUMBERCA Model: LJ-4E Type of Machine: circular knitting machine Diameter (Ø): 33 Needles (Agujas): 720 × 720 Gauge (GG): 7 Included: Replacement crown (Complete crown for gauge 7) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer:BIERREBI Model: TA103 Year of Manufacture: 2002 Type of Machine : Automatic cutting machine for knitted fabrics Condition : very little used Overlaying, marking, cutting, stacking, and counting. All these operations are now integrated into the TA103 automatic cutting system. The TA103 automatic cutter requires only one operator to position the garment pieces. All other tasks can be performed automatically with high precision and remarkable operational simplicity. With the TA103 automatic cutter, everything is simplified, faster, and more cost-effective. Bodies, sleeves, raglans, cardigans, polos, striped garments, solid colors, plaids, and marked garments can all be processed. The TA103 allows for precise and consistent cutting quality without the need for highly specialized labor. Machine production capacity: Produces up to 960 sleeves per hour Produces 90 to 150 ...

Cleaning machine / grinding machine for leather goods/belts / shoes with 2 speeds

1x SK labeller GAI 6023-x01, built in 2021, for self-adhesive labels / adhesive labels with capsule roller & 2 label As good as new GAI 6023-x01 Year of construction 2021 2 label stations 1 station with 2 roll-on heads for roll-on capsules Attachment for capsules Molded parts for common bottle sizes Accumulation sensor in the outlet, collection table with belt drive Achievement: Labelling only 2800b/h with roll-on capsule: 2000b/h Price: €38,500 plus VAT ex Rheinhessen location

Key data: 1000 kN, 172 g/PS, 40 mm

Arburg 420C-1000-290 Injection Moulding Machine with sorting flap Number: 239 Availability: in stock Year of production: 2006 Producer: Arburg Screw diameter[mm]:40 Injection weight [g]: 172 Injection pressure [bar]: 1530 Clamping force [kN]: 1000 Gap spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Min. Form Height [mm]: 250 Control Type: Selogica Tongue: German Installed power [kW]: 21.4 Working hours [h]: 95822 Weight [kg]: 3700 Dimensions [mm]: 4400 × 2000 Feed hopper: NO Robot Nest: Yes Core String: Yes

Key data: 600 kN, 132 g/PS, 35 mm

Arburg 320C-600-250 Injection Moulding Machine Number: 238 Availability: in stock Year of production: 2008 Producer: Arburg Screw diameter[mm]:35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. Form Height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 76550 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Nest: Yes Core String: 1x

Vacuum wrapping machine for writing pads in the format 65 x 45 cm including tools

Vacuum wrapping machine for leather goods including various wrapping tools Tools in format approx. 30.5 x 49 cm approx. 24.0 x 42 cm approx. 30.5 x 45 cm approx. 60.0 x 40 cm

Tools in format approx. 23 x 36 cm + various calendar and notebook tools

Manufacturer: IBL Model: MiniLab-01 Year of Manufacture: 2007 Type of Machine: vapor phase soldering system Voltage: 230 VAC Frequency: 50 Hz Main Fuse: 16 A (gL or C) Connected Load: 1.9 kVA Water Connection Requirements: - Min Pressure: 2.5 bar - Max Pressure: 4.0 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible.

Zwei Eckverbindungsmaschinen Schüco für den Fensterbau stehen zur Verfügung. 1) Schüco CC 120 A, Baujahr: 2008, max. Profilhöhe: 120mm, max. Stanzhöhe: 105mm, min. Rahmen-Innendimensionen X/Y: 400mm/400mm, Maschinendimensionen X/Y/Z: ca. 1450mm/1500mm/1000mm, Gewicht: ca. 700kg. 2) Eckverbindungsmaschine Schüco, Baujahr: 1997, Nenndruck: 0,7MPa, Luftverbrauch: 100l/Ecke, Gewicht: ca. 650kg. Eine Besichtigung vor Ort ist möglich.

Availability: as of now Current format: 170 x 92 x 25 mm Performance: 40 cycles Step offshoot: yes Gluing machine: on request Machine is in good and functional condition according to its age

2 Spindle Paper Drilling Machine

• Manufacturer: Hang (Constantin Hang GmbH) • Model: DT 106 (also known as 106 DT) • Machine Type: Paper Drilling Machine / Paper Punching Machine • Drilling spindles: 2 pieces, adjustable • Drilling diameter: 3 – 20 mm (standard up to 14 mm, optionally with hollow shank up to 20 mm) • Table size: approx. 110 × 68 cm (width × depth) • Max. drilling distance from the edge of the paper: up to 470 mm (face hole approx. 300 mm) • Max. stacking height: approx. 70 mm • Operation: Foot pedal (electric) • Connection: 380–400 V three-phase (3-phase) • Machine weight: approx. 250 kg • Condition: Used, technically checked, ready for immediate use

Leather goods vacuum wrapping machine including wrapping tools for various small formats LeporelloKalendner, A7 Cases, Business Card Holders, Car License Cases

ED 300ECO Metal Lathe Motor 400W (S1) 230V 50Hz Dimensions in mm 760x230x254 Center width/height 300mm / 90mm Rotary spindle speed 50-2500 rpm Spindle bore 20mm Spindle mount MK3 Tailstock Cone MK2 Travel longitudinal slide 275mm Traverse travel cross slide and top slide 70mm Quill path 5mm Thread Metric in mm/r 0.5-2.5 max. tool holder 8mm Weight 48kg G&HM ED300Eco_2

Leather goods vacuum wrapping machine including various tools for large formats Tools in the format e.g. approx. 34 x 66 cm with and without zipper approx. 33 x 49 cm with and without zipper approx. 26 x 47 cm with and without zipper

Profile width min./max.: 50mm-130mm, profile height min./max.: 50mm-115mm, max. notching depth: 40mm, max. cutter diameter: 180mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1250mm, weight: approx. 300kg. On-site inspection is possible.

An ACG Nowo (ACG Kinna Automatic) pillow machine for processing cotton and for filling in textiles for pillow production is available. Documentation available. On-site inspection is possible.

x-travel: 350 mm y-travel: 150 mm z-travel: 340 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 40 - 2000 U/min feeds: 5 - 500 mm/min rapid traverse: 1,2 m/min total power requirement: 1,9 kW weight of the machine ca.: 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PROBAT UG22 zu verkaufen / for sale