135,584 used machines on RESALE, but how to find them? Machine Search
Spiral kneader, Fabr. Boku, Type MK 240 Ak-CSDT
Spiral mixer, Fabr.Diosna, SP 240 AD
Lifting mixer, Diosna Type S 120 a, extendable
Rotary lever kneader, Fabr. Imperator - Alkogel
Spiral mixer, Fabr.Diosna, SP 180 AD
Rund- und Langwarkmaschine Superba Spezial,Fabr. Kemper, Type SU-BR-1500
Punch for clipping machine Poly-Clip 274305 A 15-30 br for FCA 100, 140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: FANUC 18iM Super CAP II total power requirement: 22/26 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6,25 x3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...
M. No.: 24 Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency.
Punch for clipping machine Poly-Clip 59895 36 mm for FCA 3461, 3462, 3463, 3430-18 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
Punch for clipping machine Poly-Clip 163787 36 mm for FCA 90, 120, 140, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
Cylinder pneum. kpl. for Poly Clip FCA 3430,3430-18 ,3463 ,FCA 120,160 - NEW order no. 150390 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT No.: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36
Clip outlet for clipping machine FCA 3430-18 Poly Clip Item number : 157124 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
M. No.: 12088 10 Performance: 125 cups per min. (gross) Consists of: -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product The machine can also label round cups (160-180°, around). Cup height: 120-130 mm
Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 157073 - Klipper 15/8 , br 30 mm koddiert , for FCA 3430/18,FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
cross-section width:: 800 mm cross-section heigth:: 15 mm feed:: ab ca. 5 mm speed of feed:: m/min cuts max.:: Schnitte/m condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards, - New on-board system machine, - New control cabinet with PLC system Siemens S7-1200, - CE marking, - Instructions for use and maintenance in English or German language The data for this ad was created with ModulMWS - the s ...
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 62391 - Klipper 18/13 / BR 36mm , koddiert, für FCA 80, FCA 3430-18,FCA 3461, 3462, 3463 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
MAJA ARTICLE NUMBER : 716-2690 PULL ROLLER FOR MAJA EVM3006 EF ,EVM 4006 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Format adjustment motor for Poly Clip FCA 120-S3160-S3 ,AHL 1200 - NEW 24 V Article number 167554 FCA 120/160 169753 AHL 1200 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
MAJA PART NUMBER : 515-0422 TRANSPORT SCRAPER ROLLER Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Deckel Maho Universal Machining Center CNC DMU 70 VL Deckel Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Typ [ type]: DMU 70 VL [control unit]: Heidenhain TNC 430C Jahr [construction year]: 2002 Travel range [travel path]: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ internal coolant supply Tool changer: 2 x 32 places Tool holder: SK 40 to DIN2080 Cooling system: Knoll Chip conveyor: 2 units/units Weight [weight]: 12.800kg Dimensions [needed space]approx. (L x W x H): 5.3m x 2.75m x 2.75m Technical documentation/documents available in detail
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : Die 156684 - clipper 15/11 / br 30 mm coded , for FCA3430/18, FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Bystronik By Speed Laser year - .2004- 4400w Machine equipped with Bytrans loading and unloading connected to a sheet metal magazine with 76 drawers divided into 12 unloading and the remainder of virgin sheet metal.
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 157073 - Klipper 15/8 , br 30 mm koddiert , for FCA 3430/18,FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Matrices for single and double clippers 12974 21691 48158 73526 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 164005 - Klipper S 07 / br 26 mm , not coded , for FCA 120,160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
turning diameter: 750 mm turning length: 1520 mm control: Fanuc 18 iT-B total power requirement: 22,0 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
