used
mobile sword folding unit
used
Pocket folder GUK FA 36-4 /SAF 36; good condition; cleaned and tested; Folding rollers need to be replaced; Format 36x45cm; 4 folded pockets; smallest fold 26mm; automatic suction feeder SAF 36; Double sheet inspection DBK 36; Shed display. Pocket folding machine GUK FA 36-4 /SAF 36; good condition; cleaned and checked; folding rollers must be changed; size 36x45cm; four pockets; smalest fold 26mm; automatic vacuum feeder SAF 36; double paper control DBK 36; Stream Delivery Unit.
used
GUK FOLDER Pockets: 4 buckle plates, 1 pair of slitter shafts High pile feeder FE // M.Nr.: 23699 / 1986 Mobile stream delivery - slitter shafts - compressor
used
GUK K72/4-KTL-P2 Year 1990 Gremser feeder 4 cassettes 2 knives Gluing Device Delivery in production
used
GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...
used
Heidelberg Stahlfolder KH 78/4 KL year 2014 max. size 78 x 120 cm min. size 14 x 18 cm pallet feeder PFH 82 Tremat head unit 4 buckles 78 cm with high performance kit 2 knives side cassette MCT control Air stream table touch monitor Instant gate EMC filter delivery SBP-66
used
Max. sheet size: 52 x 84 cm Min. sheet size: 10 x 15 cm (with TREMAT 14x20 cm) Max. speed: 180 m/min Control/electrics: Digital control OCT 500 Integrated counter for single sheets and number of batches Self-setting mode with automatic setting of sheet length, suction length and sheet gap Set up mode / single sheet mode Frequency dirven inverter drive for stepless speed adjustment Fi 52 flat pile feeder: Sheet seperation with airwing blowers Swing up supporting bar for sheet seperation attachment Height scanning with contact-free pile control PU-suction wheel with 2 rows of holes Double sheet inspector 1st station Ti 52 Praline: Working width 52 cm Standard equiped with buckle plates with swing deflector Nickel-faced rods Helical gears for synchronized drive Soft-PU folding rollers with Corrosion-proof slitter shafts and FESTA setting devices Special ball be ...
used
Rotary feeder - separating head 4 buckles 2 knives Anti-noise hood VSA-66/MD press delivery
used
- Year 2001 - flat pile feeder - delivery connector - Four buckles cross folder - technology: touch & work - error avoidance: misfeed- doublefeed- jamming control - memory folding types: 11 standard types of folding preprogrammed - 50 memories for repeat orders - knife: full automatic - perforation and creasing wheels available - rollers in good conditions - numbers of buckles: 1. folding unit: 4 buckles + knife 2. folding unit: 2 buckles - sheet size: max. 490x650mm; min. 120x172mm - paper weight: 40-250 g/sqm - pile height: 650mm - speed: max. 27.000 cycles/h - power: 400V / 50Hz - 2,5kW - dimensions: 2.540x1.790x1.440 mm - weight: 870kg - available immediately
used
Horizon AFC 746 D - cross folder 16 pages year 2019 Counter 73 million good condition in production available immediately
used
Horizon Cross Folder Model AFC-504AKT Machine is in stock and is immediately available
used
Pile feeder - separating head 4 motorized buckles 1 knife – 2 side buckles Gate fold Noise hood Batch counter LCD touch-screen control Belt delivery
used
Flat stack feeder FSA, automatic adjustment for folding pockets, program memory, 1st movement 52 cm with 4 pockets, 2nd movement 38 cm with 4 pockets, scale delivery
used
Pallet feeder 1st station 8 folding bags Window fold pocket Side pocket 2 Swords Shed delivery ASP 66 Noise protection hood
used
MBO K76/4 S-KTL 32 - pages round pile feeder good condition in production
used
Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood
used
4 Buckles FIRST UNIT 4 Buckles SECOND UNIT Flat pile feeder Digital counter Digital program Air compressor Belt delivery
used
MBO T 535 E/6-4-X year 2015 width 53 cm flat pile feeder 1st unit 6 fold plates 2nd unit 4 fold plates 3rd unit 1 knife + gluer HHS with C220 control Delivery in production Good Condition
used
1992 VZ430014 Serial No. 2003492 T45-F, PORT 1/3, K.03/14 T45-1-45/4, PORT 1/3, K.03/14 A45/1-DC, PORT 1/3, K03/14 Available: immediately Located: Germany
used
Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery
used
MBO Folder T535P 6/4, Year 2016 Flatpile feeder Automatic roller and buckle adjustment 1. Station 6 Pockets 2. Station 4 Pockets A56 Stream delivery Etc. Available: at short term
used
Pallet feeder – separating head Vaculift - Vacubelt 6 buckles Gate fold Compressor Without delivery
used
2 pockets Compressor High stacked feeders
used
Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: one roller on this machine must be replaced
used
- Year 1991 - Four buckles max paper size 52x84 cms. - One mechanical knife - Flat pile feeder with copy counter - All rollers in nice conditions, very low used - Air pump, Anti noise hood, All accessories
used
Stahl Quickfolder T34 Year: 2000 Format: 340 mm 2 Fully automatic folding bags Suction machine with built-in compressor Rollers in new condition More photos availables Ask for price and more information
used
Pharmaceutical Folder Stahl T 36/4-4-F.2 with 4+4 buckles -Year 1989, High pile feeder -Max Sheet Size: 14.17″ x 25.5″ - 360x650 mms. -Min Sheet Size: 3.15″ x 3.94″- 80x100 mms. -Min folding length: 3/4 ”- 20 mms. -Max speed : 40,000 Sheets per hour -Four buckles in first station + four buckles in second station -Available in October -Very nice conditions
used
Pile feeder 6 buckles Batch counter Belt delivery Compressor Machine complete in working conditions.
used
- Year 1997 - Four buckles max paper size 52x84 cms. - Round pile feeder with all Digital controls - All rollers in nice conditions, very low used - Air pump, Anti noise hood, All accessories
used
Steel TD 52/4/4/2 year 2001 flat pile feeder with Tremat Compressor Automatic Buckles SBP 46.2 up right sheet delivery Double Gate Fold very good rollers very good condition available immediately from stock in Germany
used
Standard