126,734 used machines on RESALE, but how to find them? Machine Search
Packaging line Pack your own coffee pods fresh on our flexible coffee pod machine according to your needs. With the help of this machine, you can easily make coffee pods. The coffee pod packaging machine portions, compresses, seals and cuts the pods (soft pads) into their shape. Semi-Automatic Machine – Handmade Coffee Pads The semi-automatic machine produces coffee pods that are used in all common coffee pod machines. Common coffee pod filter paper is used. This allows you to produce coffee pods flexibly and as needed. The dimensions of the machine are 100x50x150cm (w,d,h). The coffee is ground in a separate coffee grinder and portioned in the packaging machine. Cleaning the machine is simple and straightforward. For more information, please contact us! Phone: 05683 3498433
Automatic cereal humidification equipment Fully overhauled, tested and painted
Used Roll Press FORTUNA, Machine Size 4 -In Bakery Condition- - 30 hollows per plate - Weight range: 40 - 110g - Condition: very good, - Video on request A viewing is of course possible by arrangement.
Offered is a fully automatic strapping machine for PP strap, year 2006. The machine has defects. Electronic strap tension control 50-450N, polypropylene (PP) strapping band width: 12mm, core diameter X/Y 200mm/280mm, heat-seal joint, cycle performance 30 strappings/min, package dimensions X/Y: min approx. 100mm/30mm, machine dimensions X/Y: 1450mm/600mm, working height: 800mm, weight: approx. 220kg. Inspection possible by arrangement.
Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power.
Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2021 Model: Modula Lift ML 50D Height: ...
Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2013 Model: Modula Lift ML 50D Height: ...
Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer ...
CONTROLS conventional BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 20 mm bar diameter (max): 20 mm worpiece length max.: 100 mm MAIN SPINDLE spindle revolutions (min): 214 /min spindle revolutions (max): 5168 /min number of gears: 81 drive power: 11 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 6000 mm space requirements -front/back-: 2000 mm total weight approx.: 5600 kg Technical Data - Max. diameter of hexagonal rods: 17 mm - Max. diameter of square rods: 14 mm - Max. stroke of sidecars: 42 mm - Forward and backward movement of sidecars: +/- 8 mm - Max. stroke of axial carriages: 50 mm - Forward and backward offset of axial ca
CONTROLS conventional BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING swing diameter (max): 20 mm turning diameter (max): 20 mm bar diameter (max): 20 mm MAIN SPINDLE spindle revolutions (max): 5168 /min ELECTRICAL SPECIFICATIONS total power consumption: 11 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5680 mm space requirements -front/back-: 1400 mm total weight approx.: 5000 kg tech. details: - max diameter hexagonal bars 17 mm - max diameter square bars 14 mm - max advancement bars 100 mm - max stroke axial carriages 50 mm - Offset of axial carriages forwards and backwards +/- 8 mm - Max stroke tool holder spindles 86 mm - Offset of tool spindles forward and backward +/- 11 ...
CONTROLS PLC SIEMENS BASIC FUNCTIONS number of spindles: 6
CONTROLS conventional BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 20 mm bar diameter (max): 20 mm worpiece length max.: 100 mm MAIN SPINDLE spindle revolutions (min): 214 /min spindle revolutions (max): 5168 /min number of gears: 81 drive power: 11 kW X/Z SLIDE number of tool positions (total): 12 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 6000 mm space requirements -front/back-: 2000 mm total weight approx.: 5600 kg Technical Data - Max. diameter of hexagonal rods: 17 mm - Max. diameter of square rods: 14 mm - Max. stroke of sidecars: 42 mm - Forward and backward movement of sidecars: + ...
CONTROLS electronic controls SIEMENS BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 32 mm bar diameter (max): 32 mm worpiece length max.: 125 mm MAIN SPINDLE spindle revolutions (min): 260 /min spindle revolutions (max): 3080 /min number of gears: 2 ELECTRICAL SPECIFICATIONS total power consumption: 14 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5750 mm space requirements -front/back-: 1300 mm total weight approx.: 8200 kg Machine completely overhauled and NEW (still in packaging) Technical Data - Max. hexagonal bar diameter: 28 mm - Max. square bar diameter: 22 mm - Max. longitudinal slide stroke: 125 mm - Extraction thread u ...
CONTROLS electronic controls SIEMENS BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING swing diameter (max): 32 mm turning diameter (max): 32 mm bar diameter (max): 32 mm worpiece length max.: 125 mm MAIN SPINDLE spindle revolutions (min): 260 /min spindle revolutions (max): 3080 /min ELECTRICAL SPECIFICATIONS total power consumption: 14 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5750 mm space requirements -front/back-: 1300 mm total weight approx.: 8200 kg tech. details: - max. diameter hexagonal bars 28 mm - max. diameter square bars 22 mm - max advancement bars 175 mm - max length shooting 100 mm - max stroke longitudinal carriages 125 mm - Trigger t ...
Vertical cartoner, intermittend, semi-automatic Formate area folding box depth 15 - 70, width 20 - 115, height 50 - 190 mm, box remove by sucker Output max. 15-70 boxes/min, the maximum speed depends on the format and product Embossing device Vacuum pump Complete housing with segment doors Mobile with removable chassis Electric cabinet mobile PLC Telemecanique TSX 17 Electr. connection 400V/50Hz This machine is offered at a special price and sold as-is without technical inspection.
Automatic log cutter / strand cutter for ceramic masses. Separation is carried out by means of cutting brackets with metal wire. Maximum passage: 360 mm wide / 180 mm high; Drive: 1.5 kW (left in working direction); Measuring tape: 320 mm wide x 750 mm long. The cutting thickness and length can be adjusted via changing wheels and measuring roller. The scope of delivery includes various interchangeable wheels and height-adjustable spindle feet.
FOLDER STAHL T 56/4FB2 -Year 1987 -High pile feeder -Four buckles Min./max. size 150x210 mms / 560x840 mms -Air pump, Delivery -All rollers in nice conditions -Available immediately
Langguth Deckler+Labeller sysLAN 720+selfLAN 510 Automatic capping and adhesive labeling in one machine Very good condition, straight from production
General Manufacturer: MEP Type: Cobra 352 NC 5.0 Year of Make: 2017 Control: Volution TS50 Cutting speed: 1,700 / 3,400 rpm Saw blade diameter: 350 mm Cutting performance Round tube: 120 mm Square tube: 105 / 100 mm Rectangular tube: 180×70 / 135×60 mm Solid material round: 50 mm Solid material square: 80 / 55 mm Solid material rectangular: 160×35 mm Dimensions and weight Dimensions: 1,750 mm x 2,360 mm x 1,700 mm Weight: approx. 600 kg Condition Condition: Used Functional: Tested and fully functional
miter: ja cooling: ja weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...
GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. ...
Suction Feeder, 2 Pockets, Compressor, Table Folding Machine
High Speed Paper Folding Machine, Counting and Batching, Digital Plate Adjustment For Accurate Reading, Sound Hoods, 6 Fold Types, Double Sheets and Jam Detector, Suctuion Feeding, Complete with Perforation Unit and Perforation Blades, Up To 240gsm, Speed: 27000 Sheets/Hours
X16374-151 Automatic Riveting Machine for M8 claw nuts Manufacturer: NAGAYAMA, Model: CB/NHF & NHF T-nuts, Year of Manufacture: 2015 Serial no YN-2015-10 Made in Japan
Central lubrication unit, gear pump unit, MFE5-BW30+399, SKF, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - Minor damage to the level indicator plug without functional impairment. Technical data: - Central lubrication unit, MFE5-BW30+399, Vogel/SKF, new - Gear pump MFE5-2000+299, - 0.5 L/min, max. 28 bar, 230/400 V, 2700 rpm - 50 x 35 x 55 cm high - Includes level indicator - Includes level monitoring 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...
Technical data: Cutting range: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest offcut length: 35 mm Total connected load: 2.0 kW Saw motor, power frequency controlled: 1.5 kW Cutting speed infinitely variable at frequency controlled: 20 - 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, top in maximum position: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Stepless cutting speed - Saw blade guides made of carbide, replaceable - Hydraulic cutting feed - ...
Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 1979 Dismantling and removal by buyers Dismantling also possibl ...
Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 2004 Dismantling and removal by buyers Dismantling also possibl ...
CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0)
Juki KE 2050 RL: 2007 Find more here - / Contact us at -
Juki KE 2060 RL: 2006 Find more here - / Contact us at -
used
up to maximum panel format 1397 x 1778 mm, with automatic pallet loader Immediately available, price on request
used
incl. inline punch, automatic pallet loader with 2 segments, under full maintenance contract Coming soon, price on request
Key data: 430 mm
Fully automatic band saw machine Manufacturer : Kasto Type: Twin A4 Bauahr: 2010 Condition: gebraucht / used Location : Warehouse Sweden Technical data Cutting range: Cutting range around 430 mm Cutting area square H x W 430 x 430 mm Cutting area flat H x W 430 x 430 mm Clamping range 0 – 430 mm Smallest dimension to be sawn: 10 x 10 mm Smallest section length 6 mm Shortest residual piece length in automatic mode (only possible for geometrically flawless surfaces) 35 mm Shortest offcut length in single cut 10 mm Dimensions and weights: Length approx. 2,140 mm Width incl. chip conveyor 4,610 mm Height (saw frame lowered) approx. 2,195 mm Height (saw frame in maximum position) approx. 2,410 mm Material support height 700 mm Coolant: Coolant tank volume 150 l, Pump capacity at 3 m head 25 l/min Paintwork: Machine light grey RAL 7035 textured paint Saw ...
used
Fully automatic machine with automatic plate feeder consisting of 5 cassettes, identical to AGFA Avalon N8-60 XT, available at short notice, price on request
Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.
Key data: 320 mm
Machine type: Automatic band saw Manufacturer: Jaespa Type: W320AZ Year of Make: 2002 Condition: used / gearbox damage Price Vb Location Warstein , Germany Reference number M-JAE-0226 DESCRIPTION We offer you a used band saw from the manufacturer Jaespa. Gearbox needs to be replaced. Weight approx. 2t Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
Technical data: - Cutting range at 90° around 260 mm - flat 260 x 260 mm - Material replenishment machine max. single stroke 600 mm - Max. section length in multi-stroke mm - Saw blade dimensions approx. 4100 x 32 x 1.2 mm - Cutting speed infinitely variable 12 - 100 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Chip conveyors - Total drive power 400 V / 8.5 kW - Space requirement approx. W 2350 x H max. 2340 x D 3050 mm - Weight approx. 3000 kg - from location D - 14943 Luckenwalde
The hydraulic automatic tilting kettle with a capacity of 600 liters is designed for professional use in the food processing industry. The hydraulic tilting system ensures easy and safe emptying of the contents. The double jacket with thermal oil provides even heat distribution and precise temperature control, making it suitable for cooking, mixing, and thermal processing of soups, sauces, jams, creams, and ready meals. Manufactured from high-quality stainless steel, it ensures durability, hygiene, and long service life. Technical specifications: Hydraulic automatic tilting kettle Manufacturer: Sind With cover Double jacket- thermal oil Volume: 600 liters Power: 30.7kW Made out of stainless steel Machine dimensions in cm: Length: 205 Width: 158 Height: 123
2008 HEIDELBERG STAHLFOLDER KH 78/4K-TK KH78+SPH-70+PFH 82 16 pages
Horizontal strapping machine with side presses, good condition, plant is configured for plastic and steel strapping
Costarelli D1300 fully automatic agglomerator, 315 kW drive, was processing LDPE, can be used for film, fibers, fluff, light abd voluminous plastic materials to massive volume reduction., throughput rate around 1 Ton per hour, depending on moisture and material, including : loading conveyor belt, feeding belt, barrel diam.1.300 mm., extraction hopper, screw conveyor, roto-classifier, electric cabinet, 400 V 50/60 Hz, CE compliance certificate, electrical drawings, Users manual, Machine in very good conditions, -------------------------------------------------, watch some videos of similar agglomerators in the attached videos, capacity: 1.200 kg/h, conditions: very good, type: 1.300 mm , Totale power needed for this line: around 500 KVA, including belts, classifier, screws., Including: loading conveyor belt
Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg
maximum number of results exceeded
please refine your search
