136,416 used machines on RESALE, but how to find them? Machine Search
SPECIFICATIONS: 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 320 mm fixed
Auction-ID: A7-49302-94
COMPOSITION: 01 Motorized roller conveyor/transversal/lifting roller conveyor mm 2,500 x 1,100 for feeding 01 Motorized roller conveyor consisting of mm 18,000x1,100-1,300 for unloading; Packaging dimensions on pallet mm 2,500x1,200; Speed controlled by inverter 01 Automatic wrapper Wraptor Dinamix HS with stretch film H 2.150 mm max. 01 Heating unit for automatic roll cutting 01 Siemens touch monitor and CNC control, hourly output max 40 pallets/h
Pallet feeder – separating head 4 buckles 2 knives Navigator Vaculift Vacubelt A76 belt delivery
Semi-automatic drilling device for plastic parts This purely pneumatic drilling device is designed for repeatable drilling of small plastic parts up to approx. 40 x 200 x 40 mm with holes up to 3 mm. Specifications: - Linear axis travel 420 mm - Stroke approx. 30 mm - Height adjustment approx. 100 mm - With 2-hand release - Plexiglass protection on 3 sides - Emergency stop switch - Sturdy, mobile frame made of aluminium profiles - With 4 swivel castors, 2 of them with brakes - Overall dimensions approx. 1000 x 1000 x 1700 mm - Weight approx. 50 kg - With collet for drill bit 1.5 mm Expiration: - Setup: Adjust stop angle to part size - Setup: Alignment of cross table in X and Y - Setup: Set height adjustment to part height - Inserting the part - Triggering via 2-hand button and holding until drilling is completed - Removal of the finished part and placement ...
Make : Tetra Pak Model : TBA 19 Working Hours : 34,000 Format : 250 ml Version : 10 v Y.o.m : 2000 Make : Tetra Pak Model : TSA 46 Make : Tetra Pak Model : Easy ride Make : Tetra Pak Model : TCBP 70 Make : Mariani Shrink Wrapper Make : KHS Model : Palletiser
ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...
Key data: 400 mm, 180 mm
Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.
Flatbed panel and panel machining center equipped with three, four or five CNC axes. These CNC machines are suitable for the processing of solid wood panels – HPL – laminate boards such as FUNDERMAX® – chipboard – MDF boards – plastic boards (e.g. – PVC / PE) – synthetic resin boards and other boards and panels that can be tensioned by vacuum. The machines of the PLANUS series are offered with two different clamping options. - In version 1 - the material tension is done by vacuum on a synthetic resin plate - in version 2 - the material tension is also carried out by vacuum, but the suction blocks are located on tensioner bridges that can be moved lengthwise. Drilling – milling – sawing, all with one machine. The machines can be configured according to the customer's requirements. - Milling spindle drive power 11 kW to 18 kW - Tool holder in the SK30/SK40 ...
Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)
Automatic rebating machine / automatic cross-cutting machine 2 spindles
A versatile casing stuffing/clipping system. Suitable for applications such as: sausage, deli meats and ham; fresh ground meats; whole muscle meats; netted meats; non-meat sausage, hams, and deli meats; fresh ground fish; surimi/fish sausage paste; raw/frozen/refrigerated pet food; pumpable cheese; soup; sauce; ground fruits and vegetables
AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...
AUTOMATIC twin table SLOT MORTISER machine model BALESTRINI 2CAP second hand machine max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.13 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9000 net weigth kgs. 600 volt. 380/50
Used automatic labeling machine from KOSME model TOP STAR 960 20T S2 E4. New 2003. For paper labels (main and counter) cold glue. The labeling machine is equipped with two stations with label magazines. Each station has five label transfer pads. The carousel is equipped with 20 plates. General overhaul carried out in 2018.
Used fully automatic labeling machine made by KHS Innoket model SE 2000. New 2007. Wet and hot glue labeling capability. Automatic film roll change at each RF station; automatic paper label magazines. Machine speed for RF (hot glue) - max 45,000 butts/hour. Machine speed for paper labels - max 45,000 butts/hr. Machine equipped with 2 stations for paper labels, 2 stations for film labels; 40 plates.
Mosca RO-M-PK Condition overhauled, serviced, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue Belt frame 600 x 500 mm Foot pedals on both sides Control panel swivel, position 90°-180°-270°
SIAT SM 11/4 Automatic Case Sealer Suitable for long production runs. Designed to apply a C” strip of adhesive tape to the top and bottom of boxes.
Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR-500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 8 mm polypropylene strapping Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue
: 370 mm rund : ja : möglich The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FOSHAN LX-425 metal circular sawing machine was built in 2019 by the Chinese company Foshan Nanhai Longxin Machinery Co., Ltd. The machine designed for precision cutting of workpieces at a fixed angle of 90° performs the machining process (from loading to the workpiece cutting itself) fully automatically, thanks to the provision of a bar feeder with magazine. The machined workpieces have a smooth surface without any burrs or distortions. In addition, the ability to cut more than one piece of material (bundle) makes the FOSHAN sawing machine an excellent choice for mass production. To this date, the FOSHAN LX 425 circular sawing machine has cut bundles of 4 brass tube profiles into suitable lengths. Technical specifications of the FOSHAN LX-425 tube cutting machine - cutting angle: 90° - cutting disc diameter: 300 mm - cutting disc bore: 32 mm - cutting disc rotational speed: 42- ...
For inserting eyelets into pre-perforated material such as cardboard, cardboard, plastic, etc. -Automatic eyelet machine with maintenance-free brake motor drive -Automatic eyelet feed to the upper tool -The eyelet pressure can be adjusted according to the thickness of the material -The trigger is done with a foot pedal. Machine is in good condition
- Flat pile feeder FD 66-T - Tremat - Digital Control - 6 folding pockets - 2 knifes - mobile stream delivery
Functions: Automatic storage and retrieval of stored goods, High space savings – up to 85% less floor space compared to conventional racks, Ergonomic working, as the goods are provided at working height, High picking accuracy and quick access to stock items Load capacity: Maximum. 2x 33500 Kg, Shelf load: up to 495 Kg test at measurement 1. The permissible resistance is less than 0.20 Ω. The measured values are 0.01 Ω and 0.03 Ω respectively and thus well below the limit value. Measured values: L1–PE: 0.59 Ω / 399 A, L2–PE: 0.51 Ω / 461 A, L3–PE: 0.54 Ω / 436 A, Required minimum short-circuit current: 375 A, maximum . Impedance: 0.61333 Ω; Result: All three measurements are within the permissible limits and are met / in order test points at measurement 3. The prescribed minimum value is 1 MΩ. The following were measured: lift motor M1: > 500 MΩ, extractor motor M2: > 500 ...
Fully functional Index Lathe Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.
Cutting capacity: 4300 mm x 4250 mm. Sawblade height: 95 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 5-130 m/min. Returnspeed 130 m/min. Programm fence speed: 80 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1050/1850/2650/3450 mm. Machine control: CADmatic 4 air tables of 2160 x 650
boring unit with 23 spindles grid 32mm, motor 1,5kW boring unit tiltable 0? to 90? max stroke of the boring unit 80mm table 1000mm x 400mm pneumatic clamping of the workpiece fence left and right manually adaptable with foot pedal
Length work table: 600 mm Width work table: 320 mm Work table height: 850 mm Max. drill length: 240 mm Max. Traverse stroke: 200 mm Vertical stroke: 150 mm Tilting of the boring head: 45? 0? 45? tool clamp 0-20 mm Revolutions: 2860 tr/min Motor Power: 2,2 KW
Key data: 325 mm
The machine is ideal for the precise cutting of solid material, tubes and profiles made of steel, stainless steel and non-ferrous metals. The NC control system allows repetitive cutting tasks to be carried out efficiently and reproducibly. The robust industrial design makes the saw the ideal solution for locksmiths, steel fabricators and general mechanical engineering. Technical data Manufacturer: BEKA-MAK Type: BMSO 325 Machine Type: Horizontal Metal Band Saw Design: NC-controlled semi-automatic Cutting type: Straight cut 90° Saw blade: approx. 34 × 1.1 × 4,110 mm Belt speed infinitely variable Hydraulic saw feed Hydraulic workpiece clamping Coolant Setup Cutting capacities at 90° Round material: Ø 325 mm Square material: 330 × 325 mm Rectangle material: 500 × 325 mm Facilities NC control Hydraulic material vise Automatic saw feed Lobkn Aszwd E Nj I H Ajrr ...
Automatic Grinder Manufacturer: Seydelmann Model: AV 250 K Completely made of stainless steel Electric power: 81kW Voltage: 380V 60Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters
Automatic Grinder Manufacturer: Seydelmann Model: AV 250 Completely made of stainless steel Two-speed working worm, three-speed feeding worm Standard cutting set Electric power: 80kW Voltage: 400V 50Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters
KRONES Contiroll fully modernized in 2024, bottle in and out on one side, Warranty -24 months
cutting width: 250 mm weight of the machine ca.: 1,3 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine from 2007 after a major overhaul in 2024 in a fully technical novelty condition, it is possible to equip the machine with any format parts for each bottle or label
Automatic laminator machine1450 Automatic sheet feeder Automatic board feeder Automatic registration with servo motor Conveyor
P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bendging Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.
Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm
Only 12.500 working hours. Included options: ASP = Additional Short Blades. ATC = Automatic Tool Change. AUT = Auxiliary Upper Tool. - Bending length max: 2.550 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Number of bends per side max: 20 - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2,2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: 40 C? +- - Bending angle: 0,2 C? - Straightness and parallelism: 0,6 mm - Bending tolerance: 0,2 mm +- - External bending radius min: 1,5.../2 mm - Compressed air pressure: 6 bar - Power: installed max: 66 kW - Main switch: 160 A ...
Ulma automatic stretch wrapping machine, model: SUPERCHIK 60, machine number: 2105375, 415 V, 50 Hz, 2.8 A, 8 kW, belt width: 270 mm, film width: 450 mm, total dimensions: 3300 mm x 900 mm x 1500 mm.
Used automatic scales from Mettler-Toledo Garvens type XS3. New 2012. Automatic scale for single load checking. Technical data: - Max. belt speed: 60 m/min, - Throughput: 250 pcs/min, - Product weight: max. 1500 g - min. 7 g, - Air supply Min. 500 kPh, - Operating temperature range: 0 C° / +40 C°, - Power supply 100 - 240 V~ / 50-60 Hz.
Vollautomatische Hochleisungsstanze - Fully Automatic Punching System Kugler 340-2R Baujahr / Year 1998 - Serial-No. 1941-340-2R Arbeitsbreite / Working width max. 340mm Format / Sizes min. 120 x 105mm Format / Sizes max. 340 x 340mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung pro Minute / Mechanical cycles per minute 80-100 Cycles Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible.
Vollautomatische Hochleisungsstanze - Fully Automatic Punching System KUGLER-WOMAKO ProPunch 50-110 (R) Baujahr / Year 2009 - Serial-No. MK00579 Arbeitsbreite / Working width max. 500mm Format / Sizes min. 120 x 105mm Format / Sizes max. 500 x 500mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung per Minute / Mechanical cycles per minute 110 Cycles/min. Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Leistungsaufnahme / Power requirement 4kVA / 3kW Nennstrom / Power 10 A 2 Werkzeuge / 2 tools 3:1 - 550 mm lang Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Mains voltage: 400V, mains: 3PH+PE, frequency: 50Hz, control voltage: 24V DC, total load current: 20.4A, short-circuit withstand rating: 8kA, control cabinet protection rating: IP56, with CE marking, an on-site inspection is possible.
maximum number of results exceeded
please refine your search
280 € 
