automat used for sale

Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, Horizontal band saw, Automatic band saw type C-916A -Cutting dimensions (flat): approx. 410 x 230 mm -Cutting data round: approx. 230 mm -Cutting data square: approx. 230 mm -Saw blade speed: continuously adjustable, 15 - 120 m/min -Engine power: 3 kW -Saw blade: approx. 4014 mm -Coolant system: present -Dimensions: 2080/1400/H1390 mm -Weight: 670 kg

SCM horizontal panel saw model Z45 with: - Useful cutting length 4500mm - Useful cutting depth 2100mm - Useful cutting height 90mm - motorized pusher with CM400 electronic programmer - Side guide with manual stops, for cross-cuts -1 fixed front plane L=2500mm -2 movable front floors L=1500mm Machine not CE compliant, for export AVAILABILITY FROM JUNE 2026

Automatic drill, drill press, drill press, stand drill, pillar drill -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm -Weight: 840 kg

- Total installed power 1.80 KW. - 3 x 2 vertical pressure cylinders. - 2 x 2 horizontal pressure cylinders. - 2 independent work areas. - Maximum pressing dimensions approx. 2350 x 600 x 1200 mm. - Working pressure: 0-100 kg/cm². - Operating conditions of this machine: unchecked. - Dimensions for transport approximately XXXX x XXXX x XXXX mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-4

Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement.

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

Key data: 300 mm, 3920 mm, 34 mm

Extensive standard equipment: Double Column Structure Double Vice with Full Stroke Tension (Hydraulic) Floating Pendulum Vise Hydraulic Saw Band Tension Automatic feed in pendulum mode (500mm) Carbide saw blade guide system Stepless speed control by inverter Driven wire brush Work Light Automatic Chip Conveyor User-friendly NC control with touchscreen Display of belt speed on the touchscreen Flushing hose for machine cleaning

HEMPEL CKE semi-auto lathe 20 Long. max 2000 mm, max Ø 250 mm. Manual/auto controls, longitudinal carriage, 3-jaw chuck. Robust construction for wood or metal turning, suitable for prod. average. Reliable and versatile machine. Auction-ID: A1-45443-35

COMIL automatic packaging line• Year : 1991 • Complete packaging line with motorized conveyors, shrink oven and loading area• Robust steel structure with three-phase power supply• Adaptable to different product formats• Synchronized conveyors for continuous throughput• Integrated control cabinet• Estimated weight: approx. 3500 kg Auction-ID: A1-45443-52

Auction-ID: A7-45252-1

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-203

Cutting capacity: 340 mm (round) / 340 x 340 mm (square) Power: 8 kW Power supply: 400 V / 50 Hz Hydraulic clamping Integrated coolant system Chip conveyor present Auction-ID: A1-44765-205

Strokes: X = 635 mm, Y = 510 mm, Z = 460 mm Spindle speed: 20 – 12,000 rpm Spindle power: AC 13/9 kW Fast feeds: 30 m/min Taper: SK40 DIN69871 Tool changer: 20 positions (disc magazine) + 30 position option Table dimensions: 560 x 790 mm RENISHAW probe: OMP40-2, OTS, OMI-2T module Machine hours: 21,788 h Spindle hours: 8,654 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-202

X stroke: 6500 mm Y stroke: ~1000 mm Z stroke: ~600 mm Power: 25 kW Power supply: 400 V / 50 Hz Automatic tool magazine Spindle speed: up to 18,000 rpm Machine for processing aluminium profiles Auction-ID: A1-44765-208

Three similar Tsugami Swiss-type CNC lathes are available. Years of manufacture: 2014/2016/2016, max. bar capacity: 32mm, max. machining length: 320mm, max. drilling diameter main spindle/counter spindle: 12mm/10mm, speed: 8000rpm, tool stations: 31, max. slot milling cutter diameter: 45mm, rapid traverse Z: 32m/min, rapid traverse X/Y: 24m/min, resolution: 0.1mm. Machine dimensions X/Y/Z: approx. 2150mm/1300mm/2050mm, weight: approx. 3500kg, control: Fanuc, operating hours 1/2/3: approx. 12265h/39970h/39470h. Documentation available. An on-site inspection is possible. Individual sale possible, however a package sale is preferred.

Highlights - CNC FANUC 32i - 6 linear axes - 2 programming channels - 2 electrospindles - C-axis standard for main spindle and sub-spindle - 25 Vehicle positions - 4 radial driven tools for slides 1 - 4 radial driven tools for slides 2 - Machining on the main spindle possible with 2 tools at the same time Technical description I-A1023 GILDEMEISTER SPRINT 20|8 CNC Swiss Automatic Lathe CNC CNC FANUC 32i TECHNICAL DATA MAIN SPINDLE Turning diameter max.: 20 mm Stroke Z1: 60 mm 180 (with option I-C1002) Max. speed: 10,000 rpm Nominal drive power S1: 2.2 kW SUB-SPINDLE Turning diameter max.: 20 mm Stroke X2: 220 mm Stroke Z2: 170 mm Max. speed: 10,000 rpm Nominal drive power S1: 1.5 kW CNC-CONTROLLED AXES Rapid traverse speed: 32 m/min Max. acceleration: 5 m/s2 Feed force (S1) axes Z1, Z2, X1, X2: 150 daN Feed force (S1) axis Y1: 370 daN Feed force  ...

Highlights − Linear actuator for maximum precision, dynamics and cost-effectiveness − 6 + 2 axes, 2 Y-axes as standard − 2 tools in use at the same time − Thanks to the conversion kit, the machine can be used as an adjustable spindle stick Technical description I-J10010 GILDEMEISTER SPRINT 20|8 linear CNC Swiss Automatic Lathe TECHNICAL DATA: MAIN SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 1: 80 mm Max. speed: 10,000 rpm Nominal drive power: S1 3.7 kW SUB-SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 2: 300 mm Max. speed: 10,000 rpm Nominal drive power S1: 3.7 kW CNC-CONTROLLED AXES Rapid traverse speed: 40 (30) m/min (Y1 only) Acceleration max. X1: 10 m/s2 Feed force (S1) axis Z1,Z2,X2,Y2: 250 daN Feed force (S1) axis Y1: 500 daN Linear axis feed force X1: 60 daN SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 P ...

consisting of: automatic glass retraction, Fabr. HEGLA, Type: ISO, Ser No. 2033401055, glass washing and drying station, Fabr. LISEC, Type: VHW-F29/V8, YOC 2022, Ser-No. 315117/944, Glass transport station, Fabr. LISEC, Type: RTVB1527MZU2, Year 2019, Ser No. 383109341, visiting station, Fabr. LISEC, Type: RSV-38/27B, Year 2019, Ser No. 320-109338, Press Unit, Fabr. LISEC, Type: FPS-35/27U2, Year 2019, Ser-No. 343-109342, Frame Conveyor, Fabr. LISEC, Type: FR-400H, Year 2019, Ser-No. 550-109339, Dam system with sealing system, Fabr. LISEC, Type: VSL-10-27, Ser-No. 100170 with 2 stowage sections, dead weight: 4500 kg, as well as separate control/control cabinet system with cooling system, Fabr. RITTAL, control unit, dosing unit, pump and valve technology, max. working height of the system: 2700 mm

consisting of: frame shelf, loading magazine: 15-fold, max. loading length: 6,000 mm, automatic feeder, bending unit, power: 3.87 kVA, dead weight: 2,530 kg, with separate control unit, type: MBF372, switch/control cabinet system with cooling unit, Fabr. RITTAL

Range : ø 20-75 mm (SDR 11 & 13.6) Core diameter : 760-1600 mm Width : 140-500 mm Outer diameter max. : 2700 mm Remark : Incl. cutter, binding unit, ejector

Range : ø 10-40 mm plain pipe; or 40-110 mm corrugated pipe, 20 m/min max. Remark : ID 450-600mm; OD 1200mm Max Width 100-400mm

MBO K 800.2 SKTL/6 AUT year 2007 pallet feeder 6 buckles 2 knives 1 side buckle Navigator control Compressor Palamides Delta 703 year 2006 good condition in production available immediately

Offer 26087 Technical data: - CNC control PS 210 for material replenishment machine, - Cutting speed, cutting pressure - Separate manual operation of all functions without CNC control - Saw blade dimensions 4150 x 27 x 0.9 mm - Cutting speed infinitely adjustable 15 - 105 m/min - Cutting pressure regulation infinitely variable 0.2 - 2.0 m/min - Cutting area - at 90° around 320 mm - Square flat 400 x 280 mm - at 45° around 200 mm - at 30° Re about 170 mm - Left + right mitre adjustable with digital display - min/max section length of the material replenishment machine - for single stroke 2 / 1005 mm - Total drive 400 V / 3.0 kW - Minimum quantity coolant spraying device pneumatically supported - Hydr. Saw Band Tension + Mot. Saw Blade Brush - 2 pieces of original roller conveyor 2000 mm - Space requirement approx. W 4200 x H 16 ...

Fully automatic coffee machine LA CIMBALI S15 CP10, 2 grinders, 1x powder container, dimensions approx. 350 mm wide x 605 mm deep x 715 mm high, weight approx. 50 kg, 2 x keys, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Fully automatic coffee machine SIELAFF Siamonie Smart OCS XL 1, 1x grinder, 3x instant powder, fixed water connection, dimensions approx. 580 mm high x 380 mm wide x 540 mm deep, weight approx. 47 kg, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Wall-mounted cable reel Length of the extendable cable 20 meters Cable cross-section 3 x 1.5 mm2 IP protection class IP34 Maximum power rolled up 1000 watts Maximum power rolled out 2300 watts Connection voltage 230V / 16A V / A Weight 7.0 kg Dimensions L x W x H 400 x 400 x 200 mm Condition: never used / new (5) Auction-ID: A1-45681-908

1,500 W output voltage 80 V 60 A, Auction-ID: A1-45526-9

Table size 2000x1380mm, width between bridge uprights approximately 3650mm. Auction-ID: A1-45188-243

Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm

Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-146

Key data: 230 mm

suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-152

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-112

Cross slide in pos. 1, 2, 4, 5, Drive for cross slide in pos. 2, Pickup spindle, hydraulic in pos. 6, Mechanical double slide in pos. 6, Pneumatic workpiece unloading device, High pressure coolant system with chiller, Swarf coneveyor, worm type with magnetic filter unit, Set of tool holders, Set of cams, Number of spindles: 6, Spindle speed [rpm]: 5.000, Auto bar loader: Iemca PRA 52 F

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-149

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-36

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-150

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-148

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-145

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-151

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-147

TECHNICAL SPECIFICATION   max. diameter of saw blade: 460 mm   cutting capacity round: 146 mm   cutting capacity square: 138 mm   mitre cutting: no   .. oblong: 250 mm   .. .. x: 100 mm   .. to: 220 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1950 mm   total height: 2000 mm   total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Vertical panel saw HOLZ-HER 1270 Automatic built in 1987, machine no. 262/8-75, machine width approx. 500x210h cm

Equipped with: electric motor, cleats, brushes, collector Auction-ID: A1-41992-84

Top High-Performance Magic Bar Loader Automations Technical features: Bar Diameter Capacity: from 8 mm to 100 mm (depending on the specific version of the cylinder head) Bar length about 1500 Driving System: Self-adjusting half-shell channel (managed by servomotor) Diameter Change: Fully automatic in less than 60 seconds via CNC keypad Bar retraction: Managed by bar feeder with integrated lubrication system Feed Speed: Up to 600 mm/sec (adjustable) Compatibility: Interfaceable with any CNC lathe (Fanuc, Mitsubishi, Siemens) Total dimensions: 1,700 x 1,100 mm Spindle Line Height: Adjustable (usually 900 - 1,250 mm) Approximate weight: 1,800 kg Auction-ID: A7-44885-29

Spindle diameter 255 mm SMW autoblok 250 BB  12-place motorized turret tailstock and bezel Auction-ID: A7-44885-38

ATS control cabinet (grid ↔ generator) Equipped with DSE control module (Deep Sea Electronics) Suitable for 3-phase applications (±63–125A estimated) Including: Lifting eye (crane movement) Fork Sleeves (Forklift) 12V lead-acid battery Auction-ID: A1-41992-142

Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible.