automa used for sale

Behringer HBP 263 AG Metallbandsäge Vollautomat (2008) Hersteller: Behringer Typ: HBP 263 AG Metallbandsäge Vollautomat Baujahr: 2008

Equipped with: Turntable for pallets, Motorized film rolls / pre-stretching unit, Automatic film feed and probably film cutting, Conveyor / chain conveyor for supply and removal of pallets, Control panel. Auction-ID: A1-41279-94

Hummer Suburban project vehicle. 9-person Year of construction: 1985. Equipped with a 6.2 liter V8 diesel engine. Equipped with automatic transmission. Road tax-free. Offered as a project vehicle. Stored while driving, engine is loose No batteries available so starting is not possible Auction-ID: A1-47442-55

Brand: Italdibipack Model: SKIN 5070 EV Type: Skinpack Packing Machine Max. cardboard size: 495 x 695 mm Max. product height: 150 mm Capacity: up to approx. 2 cycles per minute Working height: approx. 1,020 mm Dimensions (L x W x H): approx. 2,400 x 1,300 x 1,570 mm Weight: 305 kg Connection voltage: 380 V Phases: 3-phase Power: 4.6 kW Compressed air pressure: 6 bar Air consumption: approx. 24 Nl per cycle Serial Number: 3503 CE marking: present Auction-ID: A1-47442-9

Automatic checkweigher from Garvens Kontrollwaagen AG, type SL2PM. Including conveyor belt, digital control and product feed. for weight control of packaged products. Auction-ID: A1-41279-17

Auction-ID: A1-41279-11

cutting diameter: 15 - 300 mm saw band length: 4640 mm cutting width: 1,3 mm cutting range - square -: 300 x 300 mm feed length: 600 mm feed length: multiple: 5400 mm dimensions of saw-band: 4640 x 41 x 1,3 mm cutting speed: 19 - 130 m/min min. cut-off length: 10 mm height of material-table: 700 mm total power requirement: 7 kW weight of the machine ca.: 2,7 t dimensions of machine L x W x H: 2,35 x 2,34 x 1,95 m Accessories: chip conveyor, DRO for cutting length, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a professional frame strapping machine TITAN VK10 from the renowned TITAN Umreifungstechnik GmbH. The machine is ideal for fast and safe strapping of cardboard boxes, parcels or wooden articles in the shipping and logistics sector. Technical data: Manufacturer: TITAN Umreifungstechnik GmbH Model No.: VK10 Year of Make: 2000 Power connection: 400 V / 50 Hz (high voltage, CEE plug) Light barrier

For sale is a professional frame strapping machine TITAN VK10 from the renowned TITAN Umreifungstechnik GmbH. The machine is ideal for fast and safe strapping of cardboard boxes, parcels or wooden articles in the shipping and logistics sector. Technical data: Manufacturer: TITAN Umreifungstechnik GmbH Model No.: VK10 Year of Make: 2000 Power connection: 400 V / 50 Hz (high voltage, CEE plug) Light barrier

For sale is a professional frame strapping machine TITAN VK10 from the renowned TITAN Umreifungstechnik GmbH. The machine is ideal for fast and safe strapping of cardboard boxes, parcels or wooden articles in the shipping and logistics sector. Technical data: Manufacturer: TITAN Umreifungstechnik GmbH Model No.: VK10 Year of Make: 2000 Power connection: 400 V / 50 Hz (high voltage, CEE plug)

For sale is a professional frame strapping machine TITAN VK10 from the renowned TITAN Umreifungstechnik GmbH. The machine is ideal for fast and safe strapping of cardboard boxes, parcels or wooden articles in the shipping and logistics sector. Technical data: Manufacturer: TITAN Umreifungstechnik GmbH Model No.: VK10 Year of Make: 2000 Power connection: 400 V / 50 Hz (high voltage, CEE plug)

For sale is a professional frame strapping machine TITAN VK10-F from the renowned TITAN Umreifungstechnik GmbH. The machine is ideal for fast and safe strapping of cardboard boxes, parcels or wooden articles in the shipping and logistics sector. Technical data: Manufacturer: TITAN Umreifungstechnik GmbH Model: VK10-F (unit VK 10 F) Year of Make: 2004 Machine No.: 60689 Power connection: 400 V / 50 Hz (high voltage, CEE plug) Control voltage: 24 V Rated current: 2.5 A Equipment: Integrated roller table for easy handling of packages Large pass-through frame Triggering optionally via control panel on the frame or external foot switch (steute) Belt drain coil installed under the table Mobile frame on swivel castors (with parking brake) Condition: Solid, used condition from industrial operation (see pictures).

MEP Shark 282 CCS Doppelgehrungs Metallbandsäge ? Leistungsstarke Metallbandsäge für Schnitte von 45° rechts bis 60° links ? CCS (CutControlSystem) für automatischen Schnitt. (Stufenlose Regulierung des Vorschub und Abschaltung bei Schnittende) Schnittbereich RUND 0°: 250 mm Schnittbereich RUND 45° li.: 230 mm Schnittbereich RUND 60° li.: 120 mm Schnittbereich RUND 45° re.: 200 mm Schnittbereich VIERKANT 0°: 220 mm Schnittbereich VIERKANT 45° li.: 200 mm Schnittbereich VIERKANT 60° li.: 80 mm Schnittbereich VIERKANT 45° re.: 170 mm Schnittbereich FLACH 0°: 280 x 220 mm Schnittbereich FLACH 45° li.: 220 x 200 mm Schnittbereich FLACH 60° li.: 140 x 80 mm Schnittbereich FLACH 45° re.: 200 x 140 mm Geschwindigkeit: 36 / 72 m/min. Motor: 1,5 / 1,8 kW Sägeband: 2950 x 27 x 0,9 mm Gewicht: 440 kg 3x neue Sägebänder

MEBA Mebamat 434 Metallbandsägeautomat Hersteller: Meba Typ: Mebamat 434 Baujahr 2013 Zustand: gut, gebraucht Einschaltstunden: 14.800h Sägestunden: 5682h Ausführung NC-Automat Motor 7,5 kW Sägeband 6220 x 41 x 1,3 mm Bandgeschwindigkeit 15 ? 150 m/min. Max. Materialdurchlass Ø 430 / 430 x 430 Kleinster Ø 5 mm Abmessungen (L x B x H) 1700 x 3100 x 2350 mm Arbeitshöhe 750 mm Gewicht 4100 kg Nullanschlag Kratzspäneförderer Minimalmengenschmierung Automatische Materialhöhen- und Breitenerkennung Rollenbahn 300cm 8x neue Ersatzsägebänder

Kaltenbach KBS 400 NA Metallbandsäge Automat (2020) Hersteller: Kaltenbach Typ: KBS 400 NA Baujahr: 2020 Zustand: gebraucht, sehr gut, unter Strom Sägeband (mm) 5.730 x 41 x 1,3 mm Motorleistung (kW) 4 Schnittgeschwindigkeit (mm/min) 15-90 Sägeblattvorschub (m/min) 0-300 Schwenkbereich 115° Rund 90° 350 mm Rund 45° 350 mm Vierkant 90° 400×;350 mm Vierkant 45° 315×;350 mm Arbeitshöhe 720 mm Gewicht 3600 Kg CNC-gesteuerte Schnittwinkeleinstellung Separat angetriebene Spänebürste Automatischer Materialnachschubgreifer mit Hublänge 2.600 mm im Einfachhub Hydraulische Bandspannung Elektronische Sägeband-Schlupfüberwachung

Unused; in the original packaging; PVC; with mounting bracket; 9.5mm x 15mm; 1/4 bspt Auction-ID: A1-49372-339

Unused; in the original packaging; steel; with mounting bracket; 9.2mm x 4.5mm; 1/4 bspt Auction-ID: A1-49372-341

Unused; in the original packaging; with mounting bracket; 30m+2m cable; Hose diameter 1/2 11mmx15mm Auction-ID: A1-49372-345

Unused; in the original packaging; PVC; with mounting bracket; 9.5mm x 15mm; 1/4 bspt Auction-ID: A1-49372-338

Kalfass Universa 5050 EC Automatic Film Full Wrap L-Sealer Machine 17.5 units/minute 1,200mm long x 400mm high max product dimensions 500 x 500mm max seal area Apex DF 18 carton feeder Kalfass shrink tunnel Auction-ID: A1-48805-21

Unused; in the original packaging; with mounting bracket; 30m+2m cable; Hose diameter 1/2 11mmx15mm Auction-ID: A1-49372-344

Unused; in the original packaging; steel; with mounting bracket; 9.2mm x 4.5mm; 1/4 bspt Auction-ID: A1-49372-340

CONTROLS   CNC controls KASTO TECHNICAL SPECIFICATION   max. cutting height: 430 mm   sawband length: 6830 mm   sawband width: 1.3 mm   chucking capacity min: 6 mm   clamping diameter max.: 430 mm ELECTRICAL SPECIFICATIONS   total power consumption: 22 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 4750 mm   total height: 2602 mm   total weight approx.: 4500 kg Precision, hydraulic, high-performance, with roller conveyor Ausstattung: Rollenbahn mit Quertransport am Eingang der Anlage und Förderband mit Abschiebetisch am Ausgang der Anlage

Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specially designed for the precise, process-reliable cutting of stainless steel pipes (e.g. for fuel, brake, air conditioning or hydraulic lines). The system has optical laser marking detection. The control panel can be used to choose whether the cut is triggered mechanically (e.g. on the back of a union nut) or fully automatically via the optical detection of a laser mark applied to the tube. Thanks to the integrated rotating 3-jaw cutting head and a micro spray unit (minimum quantity lubrication), machining is extremely gentle on the tool. The pipes remain almost completely dry and free of coarse dirt. The entire process from insertion to clamping, separating and depositing is highly automated in a material-friendly cycle process. Fully integrated ...

Power: 22kW. Equipped with IMA ICOS TS touchscreen. Including driven conveyor belt lxw 690x90cm, 2x driven roller conveyor lxw 200x100cm, flexible extraction pipes, air table lxw 150x90cm, 1x roller conveyor lxbxh 200x70x90cm Auction-ID: A1-48474-12

Labeller, Novexx – used - : Price ex location: 1.950.-€ (net), incl. loading! More Novexx Solution Thermo Strip Avery Novexx 64-04 A2817: per piece 425.€ (net). Manufacturer: Novexx Year of construction: 2024 Type: A2817 S/N: CLG22X-00063 R = 1348 Ohms PRESSURE PARAMETERS Printing speed: 8.0 Inch/s Feed Speed: 8.0 Inch/s Material Type: Die Cut Material Length: 143.0 mm Material width: 99.0 mm Print Alignment: Feet Ahead Punching Offset: 0.0 mm Barcode Multi: 1 UPC plain text: Below EAN Klarschrift: Standard EAN Hyphens: Only with clarity Rotated barcodes: Optimized Donation Mode: True 1:1 Mode Dispensing Position: -5.0 mm X Pressure Offset: 2.4 mm Y Pressure Offset: 1.0 mm Punching Mode: Automatic Punch threshold: 128 Condition: good Available: immediately Location: Erfurt area, later Frankenberg camp / Saxony

Henkovac Automatic Lid double chamber vacuum packer, type: A-5000, serial number: 20020498, year of construction: 2002, 400 V, 3 Ph, 50 Hz, seal length: (2x) 810 mm, Busch vacuum pump, type: RA 0250 D, capacity: 250 m³ per hour, dimensions chamber: 670 mm x 830 mm, total dimensions: 1650 mm x 1060 mm x 1150 mm. Including extra screen.

- Flat pile feeder - Tremat - 1. Station with 4 buckles - 2. Station with 4 buckles - KB Station with 1 knife - Mobile stream delivery SKP-66+MKE

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

with linear precision carriage, cabling and control components Auction-ID: A1-49000-51

Kalfass Universa 5050 Automatic Film Full Wrap L-Sealer Machine Production Capacity: 20-50 packs/minute Includes Apex S02 DF Packaging Machine Auction-ID: A1-48805-33

Equipped with conveyor belt, UV inspection and control Auction-ID: A1-49000-3

equipped with Siemens S7-1500 PLC, SITOP power supply, Pilz safety system, Sinamics brake module, HMI connection and complete industrial control electronics for machine automation Auction-ID: A1-49000-148

Parts package from new vehicle with 0 km, year of construction 2017. Complete vehicle in parts except for body airbags, belts, engine control unit, immobilizer Engine complete Gearbox Axles Exhaust Drive parts Wheels Brake system Chrome-Line body parts with LED headlights Radiator Package Lighting Seats Carpet Dashboard Steering Wheel Display MMI Navigation Speedometer All fairings All parts are packed in boxes on 3 pallets LxWxH = 250x120x140 cm. Loading by forklift Transport and export worldwide can be arranged on request Auction-ID: A1-49673-10008

Consisting of 4 handling / cleaning cells for CD / DVD tampers with robot arm, 1x filter installation, type: MC/6000S, 3x EMS 19 inch power supplys, flow meter, 2 pumps, 1 control box and other accessories Auction-ID: A1-49000-9

Condition: very good, lightly used Drive: pneumatic-electric, 230 V / 50 Hz Carton size (mm): L: 120 – unlimited, W: 110 – 600, H: 120 – 600 Carton lid closing: automatic Carton size adjustment: automatic Working table height (mm): 680 – 880 Conveyor speed: 23 m/min Auction-ID: A7-49260-7

Labeling machine for ampoules/vials/cartridges Manufacturer: Rota Type: RE 400 Year of Make: 2021 Machine set up for ampoule labeling With new format sets, also suitable for cylindrical objects such as vials or cartridges Suitable for ampoules 1, 2, 3, 5, 10, 20, 30 ml Capacity 12,000-27,000 ampoules/h Processing area labels min. 25 x 10, max. 110 x 78 mm Label roll Ø 400 mm Bias tape infeed magazine for cassette filling Label presence control with luminescent delimber Hot stamping printing unit Allen, type holder 5-line Scanware camera for 100% print control Scanware Kmaera for Ink Yield Control Automatic poor ejection with counter-control Inline outlet to the downstream tray packing/cartoning machine With format sets for 1, 2, 3, 5, 10, 20 ml ampoules cf1 according to DIN EN ISO 9187-1cf0 Modem for remote monitoring Electronic batch log with audit trail 21  ...

Parts package from new vehicle with 0 km, year of construction 2017. Complete vehicle in parts except for body airbags, belts, engine control unit, immobilizer Engine complete Gearbox Axles Exhaust Drive parts Wheels Brake system Body parts with LED headlights Radiator Package Lighting Seats Carpet Dashboard Steering Wheel Display MMI Navigation Speedometer All fairings All parts are packed in boxes on 3 pallets LxWxH = 250x120x140 cm. Loading by forklift Transport and export worldwide can be arranged on request Auction-ID: A1-49673-10009

Capacity 24.000 pcs/h for in-line loading, vial sizes 2R,6R and 10R, Not installed, unused!, with amongst others: stainless steel lazy Susan turntable, plastic slat conveyor, changeable format parts, Siemens Simatic HMI touchscreen control screen, stainless steel 2-door switch cabinet and various machine parts on pallets. Auction-ID: A1-48959-9

Machine number: 431 Operating voltage: 460 V Frequency: 50 Hz Connection: 33 kW Rated current: 56 A Reading operating hours: 18,538 incl. the clamped tool holders and tools shown in the photos Control: TRAUB SYSTEM TX 8i Main spindle: Rod passage: 36 mm Max. speed: 6300 rpm Drive power at 100/40% Working cycle: 6.7/10.7 kW Torque at 100/40% Working cycle: 21/32 Nm Tool turret top: Number of tool stations: 12 X-axis travel: 50 mm Y-axis travel (option): +-20mm Z-axis travel: 100 mm Rapid traverse X/Y/Z: 15/15/15 m/min X/Y/Z measuring system resolution: 0.0005/0.001/0.001 mm Input force X/Y/Z: 4240/4240/4240 N Front unit: Number of tool stations: 5 Diameter: 40 mm Distance: 54 mm X-axis travel: 370 mm Z-axis travel: 250 mm Rapid traverse X/Y: 30/30 m/min Input force X/Z: 2800/2120 N Measuring system resolution X/Z: 0.0005/0.001 mm Rear unit: Number of tool stations: 5 Diameter: 40 mm Dista ...

General Description Slant-bed CNC turning center manufactured by AFM , designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a hydraulic indexing turret, programmable hydraulic tailstock and enclosed machining area for automated production. Technical Details Manufacturer: AFM Model: Not identified Machine type: CNC slant-bed turning center Year: Not confirmed Hydraulic indexing turret (approx. 8 stations) Hydraulic programmable tailstock Spindle nose (chuck removed) Approximate spindle bore: 55–60 mm Integrated hydraulic unit Electrical control cabinet Coolant and lubrication system Condition Used industrial condition. The machine appears mechanically complete with turret, tailstock, hydraulic system and electrical cabinet installed. The chuck is not fitted. Normal cosmetic wear, oil staining a ...

Horizontal band saw, semi-automatic Cutting diameter 260 mm Cutting range at 90 degrees: around 260 mm Cutting area at 90 degrees: square 250 x 400 mm Cutting speed 20 - 80 m/min Conventional control Total power requirement 2.0 kW Machine weight approx. kg Dimensions LxWxH 2.0 x 1.4 x 1.2 m Auction-ID: A7-49782-431

A deposit of €125.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Table size 245x245mm It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 45, will be invoiced directly to the winning bidder by the team in charge Note: The functionality of the goods has not been verified. They are sold in the state in which they are located, without guarantee of operation. Auction-ID: A7-48398-23

Power: 20kW. Equipped with IMA ICOS TS touchscreen. Including flexible extraction tubes Auction-ID: A1-48474-9

With various connectors en accessories. Auction-ID: A1-48959-101

Function: for surface cleaning/structuring/marking or for cutting/welding Laser 1: Part number. 3248890 Laser 2: Part number: 3248890 Laser power: 100 W Wavelength: 1064 nm Computer Datec: with Windows 11 Pro 64 bit, type: CLX 24-06232 Auction-ID: A7-49596-3

Including roller conveyor, length 3000 mm. Auction-ID: A1-48474-55

Lot of components for NovaSignal NovaBot/NeuralBot robotic system, consisting of Head Cradle head support ref. NA-RBTHC1, left Probe Pod module ref. NA-PPL1, right Probe Pod module ref. NA-PPR1, related cables and adjustment accessories. The material is contained in a Peli 1605 hard case. The batch does not constitute a complete diagnostic system on its own. Auction-ID: A7-49193-15

\" Technical details Manufacturer: COSMEC S.r.l. Model: SM 400 Type: Automatic multi-blade rip saw Year: 2002 Serial number: M3472 Supply voltage: 380 V Frequency: 50 Hz Total installed power: 40 kW Main motor: - 37 kW - 2940 rpm - 400/690 V - IP55 Configuration: - Automatic chain-feed system - Siemens inverter - Multi-blade circular saw arrangement - Dust extraction system - CE certified construction Blade diameter: 300–400 mm Maximum cutting height: 128 mm Maximum passage width: 650 mm Conveyor width: 400 mm Feed speed: 4–12 m/min or 8–24 m/min Arbor speed: 3400 rpm Dust extraction connection: Ø70 mm Manuals: Included Application: - Longitudinal timber cutting - Multi-blade ripping operations - High-production woodworking applications Dimensions: - Length: Approx. 7000 mm - Width: Approx. 1800 mm - Height: Approx. 2200 mm Weight: 2800 kg Cond ...

With: desktop computer with control software. Auction-ID: A1-48959-96