134,938 used machines on RESALE, but how to find them? Machine Search
CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...
Gildemeister GM42 AC Hirth, - Spindle drum locking by means of a triad of HIRTH-type rings, - Cross slide including drive in pos. 1, 2, 4, 5, - Hydraulic pickup spindle, - Internal flushing for pickup spindle, - Spindle stop attachment for pickup spindle, - Hydraulic slide for rear working with two positions in pos. 6, - Pneumatic part catcher, - Conveyor belt for finished parts, - 5x frontal spindles, rotating, with internal coolant supply, - AC threading device, - Bar feed exclusion device, hydraulic, - Chip conveyor, hinged belt type, including magnetic filter, - High pressure coolant system 100 bar, - CO2 fire fight system Total Walther, Number of spindles: 6, Max bar diameter [mm]: 42, Spindle speed [rpm]: 500 - 2.700, Max. bar feed in one station [mm]: 130, Max. travel of toolspindles [mm]: 120, Max. stroke of cross slides [mm]: 59 (pos. 1, 2) | 52 (pos. 3, 4, 5, 6), Ma ...
Automatic cereal humidification equipment Fully overhauled, tested and painted
Offered is a fully automatic strapping machine for PP strap, year 2006. The machine has defects. Electronic strap tension control 50-450N, polypropylene (PP) strapping band width: 12mm, core diameter X/Y 200mm/280mm, heat-seal joint, cycle performance 30 strappings/min, package dimensions X/Y: min approx. 100mm/30mm, machine dimensions X/Y: 1450mm/600mm, working height: 800mm, weight: approx. 220kg. Inspection possible by arrangement.
IBERICA JRK 105 with Blanking year 2000 A DIE-Cutting press of size 75 x 105 cm (29 517 Hours) Including : Stripping and Blanking Station, NON-Stop Feeder, Control and Pull Lay System, Mini. Paper thickness 90 g/m2, Max. Cardboard thickness 1,5 mm, Max. corrugated 3 mm, Chases and Frames, 300 Tons Cutting Pressure, Speed 8 500 S/Hours. In good Condition, Immediately available
Dimensions (L/W/H): 3500x1500x1650 mm Weight: 2200 kg Total power requirement: 40,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 870 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2000x3010x1250 mm Weight: 400 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2600x3010x1250 mm Weight: 500 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 850 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Some Siemens and Vacon automation components are available. 1) Frequency inverter Vacon NXS00225. 2) Power module Siemens Simodrive 611 50A. 3) 2x power module Siemens Simodrive 611 25A. 4) 5x infeed module Siemens Simodrive 611 10kW/25kW. 5) 3x infeed module Siemens Simodrive 611 5kW/10kW. Documentation available. On-site inspection is possible. All articles are new.
Langguth Deckler+Labeller sysLAN 720+selfLAN 510 Automatic capping and adhesive labeling in one machine Very good condition, straight from production
cutting diameter: - mm saw band length: - mm cutting width: - mm table - swivable: ja Grad weight of the machine ca.: 200 kg dimensions of the machine ca.: - m with welding equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
miter: ja cooling: ja weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic log cutter / strand cutter for ceramic masses. Separation is carried out by means of cutting brackets with metal wire. Maximum passage: 360 mm wide / 180 mm high; Drive: 1.5 kW (left in working direction); Measuring tape: 320 mm wide x 750 mm long. The cutting thickness and length can be adjusted via changing wheels and measuring roller. The scope of delivery includes various interchangeable wheels and height-adjustable spindle feet.
Manufacturer: ASYS Model: INSIGNUM 2000D Scan Year of Manufacture: 2018 TECHNICAL SPECIFICATIONS Nominal Voltage: 230 / 115 VAC Working Voltage: 24 V DC Frequency: 50 / 60 Hz Full Load Current: 1.5 / 3.0 A Number of Phases: 1 Power: 0.32 kW (320 W) Circuit Breakers: 10 A Pressure: Not applicable Flow: Not applicable DIMENSIONS Length: 1.2 m Width: 0.6 m Height: 1.8 m WEIGHT 200 kg NETWORK CAPABILITY Yes CERTIFICATION CE Marked APPLICATION Industrial automation / scanning system Find more here - .ucymachines/ Contact us at - sales@ucymachines
GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...
GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. ...
Inv. Num. : 8258 Type: XE35N Producer: Hanwha Created: 2018 Parameters: Switch-on hours: 8482 h Operating hours: 6915 h Maximum turning length: 60 mm Maximum spindle speed: 6500 1/min Spindle bore: 35 mm Length: 2060 mm Width: 1440 mm Height: 1760 mm Weight: 2750 kg Equipment: Collets Chip conveyor Bar Feeder 2 driven holders on the sub-spindle C-axes on both spindles Medium pressure pump (15 bar) Guide tubes
Suction Feeder, 2 Pockets, Compressor, Table Folding Machine
High Speed Paper Folding Machine, Counting and Batching, Digital Plate Adjustment For Accurate Reading, Sound Hoods, 6 Fold Types, Double Sheets and Jam Detector, Suctuion Feeding, Complete with Perforation Unit and Perforation Blades, Up To 240gsm, Speed: 27000 Sheets/Hours
Automatic horizontal band saw for cutting slats mod. TS400 – CE compliant - Dual-speed device - Max cutting capacity 420x200 mm. - Belt blade distance 2-150 mm. - Minimum cutting thickness from top 0.75 mm - Diam. flywheels 800 mm. - Flywheel width 50 mm. - Blade length 5500 mm. - Mixed oil cooling system - Hydraulic tensioning system 2500 kg - Variable feed speed 0-25 m/min - 2 hp feed motor with inverter - Main motor with 30 hp inverter - Lifting motor 0.5 hp - Nr. 3 suction ports 100 mm. - IE3 motor - Offset device - Matr. 15084 - Year 2022 - COMPLETE WITH MANUAL AND CE CERTIFICATION
Central lubrication unit, gear pump unit, MFE5-BW30+399, SKF, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - Minor damage to the level indicator plug without functional impairment. Technical data: - Central lubrication unit, MFE5-BW30+399, Vogel/SKF, new - Gear pump MFE5-2000+299, - 0.5 L/min, max. 28 bar, 230/400 V, 2700 rpm - 50 x 35 x 55 cm high - Includes level indicator - Includes level monitoring 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...
This FANUC M-2000iA/1700L was manufactured in 2018. A robust and reliable piece of equipment, its ideal for those looking to enhance their automation capabilities. Consider the opportunity to buy this FANUC M-2000iA/1700L. Contact us for more information.
This TGT Robby 900 XL was manufactured in 2019. It features a Palfinger crane 1500, a forklift lift of 1.8 m, and a Honda engine. The machine is installed on a crawler chassis with a telescopic width and offers a working height of approximately 6.5 m. It has a crane load capacity of up to 900 kg and a fork load capacity of 2000 kg. Contact us for more information about this machine.
This ITEM Montageplatz Venta was manufactured in 2022. It features a drive-free goods carrier assembly system based on the Karakuri principle, with an automated product carrier return. The modular design allows for easy modifications, adhering to standardized industry standards. It includes an ESD floor and two Deprag screwdrivers controlled via worker guidance. Contact us for more information about this machine.
This MIRECS EasyLift was manufactured in 2024. It features a stable base plate for secure anchoring, a Demag Chain Hoist DCBS with a balancer for precise load handling, and a load capacity of 150 KG. The vertical stroke reaches up to 1,500 mm with a total height of 3,000 mm. Ideal for stationary applications requiring robust and precise lifting solutions. Contact us for more information about this machine.
Technical data: Cutting range: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest offcut length: 35 mm Total connected load: 2.0 kW Saw motor, power frequency controlled: 1.5 kW Cutting speed infinitely variable at frequency controlled: 20 - 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, top in maximum position: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Stepless cutting speed - Saw blade guides made of carbide, replaceable - Hydraulic cutting feed - ...
FULLY-AUTOMATIC can be used in SEMI- AUTOMATIC mode with small different batches on and off when needed No operator (you save 1 man per shift) Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power abput 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuu ...
Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 1979 Dismantling and removal by buyers Dismantling also possibl ...
Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 2004 Dismantling and removal by buyers Dismantling also possibl ...
CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0)
MANURHIN KMX 326 C sliding head lathe was built in 2008 in France by MANURHIN KMX. The machine, distinguished by its high efficiency, was specially designed for precision machining of workpieces with even the most complex geometries. All machining processes, i.e. precision drilling, threading and turning are performed by means of a reliable spindle and tools taken from two capacious turrets. The MANURHIN KMX 326C CNC automatic lathe is offered with equipment, consisting of, among others, a CNC controller, bar feeder and tooling. The total weight of the machine is 2600 kg. Technical specifications of the MANURHIN KMX 326 C CNC lathe - CNC controller: GE FANUC Series 18i-TB - number of axes: 5 (X1, X2, Y, Z, C) - spindle rotational speed: 50-7200 rpm - spindle bore: 26 mm - spindle stroke: 160 mm - 6-position turret (2 pcs.) - bar feeder: FMB turbo 3-36 - toolholders - collets ...
Robot cell including safety enclosure and light curtain 6-axis robot HYUNDAI HH020 Transfer weight/free payload 13 kg Matrix version, material supply using matrices We currently have 2x SherpaLoader 20 in stock, e.g. built in 2018, approx. 7,500 operating hours (of which >70% is waiting time in front of the machine for the next loading request). Component dimensions Ø10 – 200 mm, length 10 – 200 mm; effective payload up to 13 kg, raw parts are supplied to this system via grid matrices. Before sale, the system will be serviced with - Software update for master control and HMI - Gear grease change on axes 1 - 6 - Encoder battery replacement on axes 1–6 and mainboard - Replacement of all energy chain cables on axes 3–6 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 430 mm
Fully automatic band saw machine Manufacturer : Kasto Type: Twin A4 Bauahr: 2010 Condition: gebraucht / used Location : Warehouse Sweden Technical data Cutting range: Cutting range around 430 mm Cutting area square H x W 430 x 430 mm Cutting area flat H x W 430 x 430 mm Clamping range 0 – 430 mm Smallest dimension to be sawn: 10 x 10 mm Smallest section length 6 mm Shortest residual piece length in automatic mode (only possible for geometrically flawless surfaces) 35 mm Shortest offcut length in single cut 10 mm Dimensions and weights: Length approx. 2,140 mm Width incl. chip conveyor 4,610 mm Height (saw frame lowered) approx. 2,195 mm Height (saw frame in maximum position) approx. 2,410 mm Material support height 700 mm Coolant: Coolant tank volume 150 l, Pump capacity at 3 m head 25 l/min Paintwork: Machine light grey RAL 7035 textured paint Saw ...
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
Robot Automation Manufacturer Guarantor Type Basic Plus Nachi M212 Year of construction 2022 1960 Hours Was operated on a Gildemeister CTX 410. It is in a used, very good, 100% functional condition
An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible.
The hydraulic automatic tilting kettle with a capacity of 600 liters is designed for professional use in the food processing industry. The hydraulic tilting system ensures easy and safe emptying of the contents. The double jacket with thermal oil provides even heat distribution and precise temperature control, making it suitable for cooking, mixing, and thermal processing of soups, sauces, jams, creams, and ready meals. Manufactured from high-quality stainless steel, it ensures durability, hygiene, and long service life. Technical specifications: Hydraulic automatic tilting kettle Manufacturer: Sind With cover Double jacket- thermal oil Volume: 600 liters Power: 30.7kW Made out of stainless steel Machine dimensions in cm: Length: 205 Width: 158 Height: 123
Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.
2008 HEIDELBERG STAHLFOLDER KH 78/4K-TK KH78+SPH-70+PFH 82 16 pages
maximum number of results exceeded
please refine your search
