autom used for sale

Mosca RO-M-P4 Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically With heat-wedge welding Odometer reading: less than 2,950,000 strapping Documentation: Operating instructions, spare parts catalogue and electrical diagram available

Offer 26078 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 2000 mm

Mosca RO-M-P5 Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically With heat-wedge welding Odometer reading: less than 930,000 strapping Documentation: Operating instructions, spare parts catalogue and electrical diagram available

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min automatic material discharge, never used Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45834-248

Technically inspected with small remark at 353889km - working hydraulic tailgate - working air conditioning - side door does not close properly at the top Auction-ID: A3-43368-10695

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45834-6

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min automatic material discharge, never used Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45833-248

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45833-6

Seydelmann automatic grinder, machine type: AV 250, machine number: 06089-1, year of construction: 2006, 400 V, 50 Hz, 138 A, 78 kW, compressed air: 6 - 10 bar, plate diameter: 250 mm, hopper: 800 liter, 3 speeds on feed screw, 2 speeds on working worm, dimensions grinder: 1650 mm x 1700 mm x 2400 mm, including Verbufa tool trolley, dimensions: 800 mm x 700 mm x 900 mm.

Convenience Food Systems automatic slicer line, consisting of: - Convenience Food Systems slicer, type: UNI-SLICER, number: 450.2251, year of construction: 2004, plastic belt, belt width: 230 mm, clearance: 260 mm x 140 mm, diameter knife: 420 mm, slicer dimensions: 2550 mm x 880 mm x 2170 mm. - Convenience Food Systems dividing belt, wire belt, belt width: 270 mm, dimensions: 850 mm x 610 mm x 1110 mm. - Convenience Food Systems check weigher, type: CW2000MK3 091.1992, year of construction: 2004, plastic belt, belt width: 275 mm, dimensions: 700 mm x 780 mm x 1100 mm. - Convenience Food Systems outfeed belt, type: ATB 791 991.1994, plastic belt, belt width: 400 mm, dimensions: 3030 mm x 900 mm x 1260 mm. - Convenience Food Systems knife sharpener, type: KSM 60 091.2174, year of construction: 2004, dimensions: 710 mm x 530 mm x 1170 mm.

Ref. №: 4104 Automatic belt skinning machine Cutting width: 370 mm Width: 800 mm Depth with conveyor belts: 1850 mm Height: 1200 mm Electrical connection: 0,75 kW, 400V/50Hz/3ACV

-Storage racks with 6 different diameters. -Automatically driven roller conveyors, fully automatic length stop, automatic ejection in pre-sorting compartments. -PLC control for convenient machine control. -Blade width of hydraulic machine : 150mm. -Capacity: 5 to 15Ton per day/shift. -Low maintenance & wear parts, still in perfect working condition with no known problems. Sale due to cessation of internal production. DBS3 automatic double bender. -Linked with cutting line. Equipped with hydraulically controlled roller conveyor, automatic transfer system, automatic double bender and ejection system in automatic pre-sorting compartments. -Simple PLC control, equipped with automatic clamping system. -Low maintenance & wear parts, still in perfect working condition with no known problems. Sale due to cessation of internal production. Auction-ID: A3-43515-16394

Kopal Aluette Automatic Sliding Gate Condition: Unused Total width gate: 580cm Passage: 400cm Color: Matte Black Equipped with: Photocells, hand transmitters, foundation plan and connection diagram Auction-ID: A1-40105-72

Kopal Terminus Automatic Sliding Gate Condition: Unused Total width gate: 1100 cm Passage 800cm Colour : Black Grey RAL 7021 Equipped with: GSM module, sensors, photocells, pressure strips, beacon, 2x hand transmitter, foundation plan and connection diagram Auction-ID: A1-40105-71

For sale is a powerful and well-preserved Rasco Solid XX 4000 spreader, ideal for professional winter service in municipal and commercial use. The machine impresses with its high spreading accuracy, large capacity and reliable technology – ready for immediate use for the coming season. ⸻ Technical data & equipment: • Maker / model: Rasco Solid XX 4000 • Year of construction: 2020 • Body: Flatbed body • Drive: hydraulic • Conveyor system: 2 augers ⸻ Capacities: • Dry material: approx. 6 m³ • Brine: approx. 2,400 litres ⸻ Equipment & Features: • Electric spreading pattern adjustment for precise dosing • Incl. operating terminal (control unit) • Combination of dry and pre-wetted salt spreading possible • Uniform material distribution due to twin screw system • Robust design – designed for tough winter service use  ...

Equipped with: digital control panel, emergency stop, second line conveyor, tape thickness 0.5-3, 3x collection tray, anti-adhesive adhesion spray unit Auction-ID: A1-41993-6

Kopal Terminus Automatic Sliding Gate Condition: Unused Total width gate: 640 cm Passage: 400cm Colour : Anthracite RAL 7016 Equipped with: Sensors, photocells, pressure strips, beacon, handheld transmitters. Auction-ID: A1-40105-73

A complete machining line consisting of four Toyoda machining centers, Palltec transport and automation system, filter systems, chip conveyors and coolant supply systems is available. 1) 4x CNC horizontal machining center Toyoda FH 630 SX, year of manufacture 3/1: 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65000h-76000h. All machining centers have the same tool management, but different operating hours within the above-mentioned range. 2) Rail-guided-vehicle system RGV Palltec FPA 630, year of manufacture: 2006. 3) Master computer system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production lin ...

Inner diameter: 220 mm Inner belt width: 200 mm Year of construction 02/90 Load capacity per reel is 150 kg, whereby the reel must be screwed to the ground. Weight approx. 450 kg Incl. wiring diagram Auction-ID: A1-45977-9

Offer 25488 Hydr . Metal - Mitre Band Saw Machine Technical data: - Saw blade dimensions 3320 x 27.0 x 0.9 mm - Infinitely variable cutting speeds N 15 to 100 m/min - hydr. Material vise - Mitre adjustable left up to 60°, right up to 45° - Cutting range at 90° around 280 mm - Square 260 mm - flat 330 x 260 mm - Cutting range at 45° li + re around 250 mm - 45° li flat 270 x 200 mm - 60° li flat 170 x 170 mm - Drive 400 V / 2.2 kW - Coolant device - Chip clearing brush - Weight approx. 1300 kg - Space requirement approx. W 1800 x H 1900 x D 1950 mm

Lightly used, fully functional paving stone production equipment Year of manufacture: 2019 Power source: 400 V AC / 50 Hz / 3 PH Main breaker: 400 A Hydraulic pressure: 170 bar / 2465.65 PSI Pneumatic pressure: 6 bar / 87.02 PSI Power: 160 kW Highest manufacturable product height: 250 mm Required installation area (base area): approx. 32 × 18 m Required ceiling height: 8 m Capacity, Production per cycle: approx. 1.2 m² paving stone approx. 2.1 m² rustic stone (semi-finished) Production rate: approx. 1800 cycles per 8-hour shift 5 colors can be dispensed can be viewed under power for disassembly the manufacturer can give a quote For viewing or further questions Contact:  Email: gabor.racz@surplex.com Mobile:+36304509673 Auction-ID: A7-45970-1

Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible.

Unused; in the original packaging; with mounting bracket; 20m+2m cable; rolled up to 1000W; fully rolled out 2500W; Auction-ID: A1-45901-343

Unused; in the original packaging; with mounting bracket; 20m+2m cable; rolled up to 1000W; fully rolled out 2500W; Auction-ID: A1-45901-342

Unused; in the original packaging; with mounting bracket; 30m+2m cable; Hose diameter 1/2 11mmx15mm Auction-ID: A1-45901-345

Automatic Oil Flusher Ultra 907 Quantity: 1 piece Auction-ID: A7-45974-15

Unused; in the original packaging; PVC; with mounting bracket; 9.5mm x 15mm; 1/4 bspt Auction-ID: A1-45901-338

Automatic Oil Flusher Ultra 907 Quantity: 1 piece Auction-ID: A7-45974-14

Unused; in the original packaging; steel; with mounting bracket; 9.2mm x 4.5mm; 1/4 bspt Auction-ID: A1-45901-341

Unused; in the original packaging; PVC; with mounting bracket; 9.5mm x 15mm; 1/4 bspt Auction-ID: A1-45901-339

Unused; in the original packaging; steel; with mounting bracket; 9.2mm x 4.5mm; 1/4 bspt Auction-ID: A1-45901-340

Unused; in the original packaging; with mounting bracket; 30m+2m cable; Hose diameter 1/2 11mmx15mm Auction-ID: A1-45901-344

The ventilation system was used to extract kitchen exhaust air. The system is weatherproof and can therefore also be installed outdoors., Additional title: Fan for air exchange, Flow capacity: 20000 m³/h, External compression: 600 Pa Total compression: 734 Pa, Fan revolution: 1160 1/min, Noise level next to the unit: 58 dB(A) in 1 m distance, Power: 5,82 kW (inkl. Frequency converter), Motor 7,5 kW, Current: Motor-electric power 16,01 A, Voltage: Motor-Voltage 3 x 400 V, Frequency: 53 Hz, Length: approx. 4070 mm, Width: approx. 1630 mm, Height: approx. 1810 mm, Weight: 1200 kg, Operation / Control: controlled via wall mounted cabinet with integrated controllers, Material: Stainless steel cabinet, Features: Fan (free spinning wheel), Frequency controller, electrical cabinet, bird protection (780 x 780)

Table size 245x245 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-23

Incl. housing, stroke rate 120-600 1/min Auction-ID: A1-46045-91

Stroke 8-40 mm, flywheel diameter 400 mm, power requirement 1.5 kW, speed 120-600 rpm Auction-ID: A1-46045-205

Table size 240x240 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-25

Table size 225x225 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-24

VIN number (chassis number) WDB6502821K248272 Vehicle data Brand: Daimler-Benz (D) Type: 1224 AF Vehicle type: So. Kfz. Feuerwehrfz. (fire engine – RW 2) Fuel: Diesel Motor power: 177 kW at 2600 rpm Displacement: 5,958 cc Max. speed: 96 km/h Weights Tare weight: 8.970 kg Permissible total weight: 12,000 kg Permissible axle load front: 4,800 kg Permissible rear axle load: 7,700 kg Permissible trailer load: 6,500 kg Permissible nose weight: 400 kg Dimensions Length: 7,600 mm Width: 2,500 mm Height: 3,100 mm Tires Front and rear: 10 R 22.5 140/137 J Additional equipment Generator 20 kVA Seillier (winch) 50 kN Mechanical light tower Compressed air compressor Kettenfahrhilfe Colour: Leuchtrot RAL 3024 First admission May 18, 1998 Auction-ID: A3-43369-5139

number of spindles:6 spindle passage:22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools!

bar material dia.:38 mm turning length:350 mm turning speeds:7.000 / 7.000 U/min number of tools:30 (3 x 10) driven tools:ja / yes control:FANUC 31i-B5 rapid traverse:30 m/min total power requirement:10,5 kVA weight of the machine ca.:6,5 t dimensions of the machine ca.:2,50 x 1,45 x 1,75 plus Lademagazin m work piece power:4 kW toolpiece turning speed range:5.700 1/min main spindle power:11 kW sub spindle power:7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining"

bar material dia.:13 mm turning length:205 mm turning speeds:12.000 / 12.000 U/min number of tools:29 driven tools:ja / yes 19 control:FANUC 16 iT total power requirement:9 kVA weight of the machine ca.:1,7 t dimensions of the machine ca.:2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank ca ...

turning diameter over bed:20 mm spindle passage:3-20 mm turning length:250 mm control:FANUC 31 i-A main-spindle speed:10.000 1/min subspindle speed:10.000 1/min Main spindle capacity:3,7 kW subspindle power:2,2 kW number of tools:35 weight of the machine ca.:3,3 t dimensions of the machine ca.:2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short  ...

cutting diameter:320 mm saw band length:3280 mm cutting width:320 320 mm total power requirement:3,8 kW weight of the machine ca.:1150 t - columm guidance - roll-conveyer 4000mm / 1000 mm lenght - cutting speed 15 - 105 m / min - mitre cutting up to 60°

number of spindles:8 spindle passage:67 mm Cam controlled multi spindle automatic lathe, used 8 main spindles pick up in pos. 8 threading attachment CNC compound slide in pos. 5, also 2. speed in pos. 2 Hydraulic spindle brake in pos. 4 Incl. length measurement, incl. Brankamp cutting force monitoring tooling: could be different like pictures Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com