We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,294 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Stock number: 3740 CNC LATHE Manufacturer: MAZAK, Type: QT 350 MY Nexus Machine NO.: 184678, Year of construction: 2006 Specifications: orbit diameter 420 mm dia. Max. rot. About bed 700 mm slide. Turning length 1538 mm Main engine power 30 kw Main spindle speed range 25-3300 rpm Spindle bore 102 mm dia. C axis - main spindle movement 0.001 degrees Z Ash movement 1607 mm Y axis 150 mm Tool turret 1 with 12 stations Driven stations revolver 1 12 pieces. Motor power driven tools 7.5 Kw Accessories: Hydr. Chuck main spindle Kitagava B-32/2 - 310 mm mm dia Hydr. Lunette Length: 4300 mm, Height: 4300 mm, Width: 2600 mm, Weight: 8600 kg
used
used
used
used
used
used
Multi-side processing machine, multi-edge automatic lathe KEKEISEN type Tornomat 2 Multi-edge impact lathe for 4-edge and 6-edge machining, square automatic lathe Masch. No. 668 361 Year of construction approx. 1975 Workpiece diameter max. 35 mm Working range 6-edge: max. SW 32 mm Working range 4-edge: max. SW 24 mm Spindle speed 250, 355 , 450 rpm. Mains connection 380 Volt, 50 Hz - equipped with 3 fold knife head for hexagonal hydraulic feed movement 0.1 to 0.5 mm/rev - Hydro-mechanical collet clamping- Workpiece clamping diameter in the built-in collet 10 mm- Control cabinet adjacent (L x W x H 700 x 350 x 1300 mm) Space requirement automatic lathe L x W x H 1250 x 850 x 1250 mm Space requirement on pallet L x W x H 1650 x 850 x 1300 mm Weight 1.4 ton. good condition; used
used
used
– after technical inspection – very good condition TECHNICAL PARAMETERS: saw wheel diameter 1100 mm saw wheel width 105 mm workpiece height up to 380 mm maximum width of the element 375 mm cutting width to the right of the saw 170 mm cutting width to the left of the saw 205 mm feed speed adjustable 5 – 40 m / min ten feed rollers Roll diameter 110 mm Hydraulic material pressure rollers for material return Electric belt tension Belt wheel cleaning ENGINES: main 22 kW hydraulic pump 3 kW belt tension 1.5 kW transport dimensions (length / width / height) 380 / 245 / 160 cm weight ~ 2700 kg
used
Basket size LxWxH: 600x400x300 mm Cleaning medium: aqueous, non-foaming solution pH 5-10 Washing container approx.: 400 l Rinsing tank approx.: 320 l Loading height approx.: 1.000 mm Loading door approx.: 810x430 mm Load weight evenly distributed: 100 kg Operating voltage: 400V/50 Hz Total connection: 36 kW Weight without filling approx.: 1.300 kg Overall dimension LxWxH approx.: 2.000x2.050x2.100 mm
new
: 820 mm saw band length: 8200 mm cutting width: 850 mm : 850 x 820 mm : 820 x 820 mm : 480 mm : 480 x 480 mm Capacity 45° rectangular: 480 x 820 mm table height: 585 mm cutting speed: 20 - 100 m/min dimensions of saw-band: 8200 x 54 x 1,6 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 9,4 kW weight of the machine ca.: 3,43 t dimensions of the machine ca.: 3,9 x 1,2 x 2,35 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. ?inverter ?hydromechanic blade tension ?swar ...
new
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 19100 € : 389.64 € : 4800x34x1,1 mm : 20-100 m/min : 380 mm : 380 mm : 520x380 mm : rund 300 mm, quadrat 300 : 590 mm : 0.12 kW : 0.55 kW : 3 kW : 2850 mm : 930 mm : 1660 mm : 1330 kg 2° inclined band blade brush control panel hydraulic vice hydromechanical blade tension inverter for continous adjustable cutting speed linear guides optical height adjustment pressure adjustment coolant pump saw band security switch heavy duty gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts€ 3.520,-- hydraulic top clamping € 1.170,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
For sale is a NOVAPAC 75 M with laminar airflow system which was completely overhauled by NOVAPAC. Format is a 500 gram cup which is closed with a circuit board. In addition to the UV cups and blank disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. Price is a matter of negotiation and the system can currently still be viewed at the customer's premises. A NOVAPAC 75 M with laminar airflow system is being sold, which was completely overhauled by NOVAPAC. The format is a 500 gram cup that is closed with a circuit board. In addition to the UV cup and circuit board disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. The price is a matter of negotiation and the system can currently still be viewed at the customer's.
used
Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: one roller on this machine must be replaced
new
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 36800 € : 743.36 € : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 810 mm : 850x810 mm : rund 480 mm, quadrat 480 : 585 mm : 0.12 kW : 1.5 kW : 4 kW : 3900 mm : 1200 mm : 2350 mm : 3080 kg 2° inlined saw band optical height adjustment linear guides control panel security switch pressure adjustment hydraulic vice chip brush hydromechanical blade tensioning coolant pump heavy duty gearbox 1,2 m roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts€ 3.960,-- hydraulic top clamping from above € 1.410,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Code: 0282 Brand: GMC Model: ROLL V 1400 Automatic 2-roller polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials N° 2 rollers: one straight and one inclined - Thanks to this inclination, the rotating brushes, by oscillating, ensure a perfect polishing of the surfaces to be treated REVERSE" system , which restrains softens the reverses even with heavy materials like marble, wooden panels, etc. Length of 2 rollers mm 1400 Roller diameter mm 350 Useful working length mm 4500 Useful working width mm 1400 Motor hp 15 Working table height from mm 950 to mm 1180 Suction mouth diameter mm 200 Overall dimensions mm 6000 x 2350 x 1750 h Weight kg 2500
used
Automation SheetMaster ? Standard configuration ? Suction frame 3000 x 1500 mm ? Peeler cup ? Vacuum sensor ? Central lubrication ? Sheet thickness sensor for double sheet check ? Control TASC 100 ? Clamp closing automatically ? Peeling system ? Suction plate module GripMaster 3000 x 1500 mm ? GripMaster Standard / 1600 ? With the following configuration: ? GripMaster Standard ? Scissor table 400 mm ? Sheet skeleton grippers with sensor ? Scrap skeleton pallet tiltable, 3000 x 1500 mm ? SortMaster Box ? TooMaster with 40 stations ? Store interface ? Safety devices for connection to storage system incl. 1st light barrier circuit
used
Loading unit: LMZ 3050 suitable for: L3030 and L3050 Max. sheet size, load/unload: 3000 x 1500 mm Max. sheet thickness, unload: 20 mm Cycle time: 230 sec
used
T. Freemantle Ltd. mobile semi automatic pre-glued sleever, model: S11, serial number: 03-178, year of construction: 03-2004, 240 V, 1 Ph, plastic belt, belt width: 250 mm, total dimensions: 4200 mm x 1200 mm x 1700 mm.
used
Bizerba GmbH & Co.KG mobile automatic slicer with outfeed belt, type: A 404 FB, number: 1742198, year of construction: 1999, 230/400 V, 3 Ph, 50 Hz, 2.5/1.4 A, s/s mesh belt, belt width: 250 mm, total dimensions: 1600 mm x 900 mm x 1600 mm.
used
Loading device LoadMaster including loading station with fanning magnets Loading Sheet size: 3000 mm x 1500 mm Min. sheet size : 1000 mm x 1000 mm Max. sheet thickness: 25 mm Max. sheet weight: 900 kg
used
weight of the machine ca.:1200 kg total power requirement:5,5 kW dimensions of the machine ca.:1,8 x 1,67 x 1,30 m band length:575 mm max. clamping height:180 mm max. clamping width:350 mm table - height over basement:500 mm saw bow - stroke length:160 mm 100 % before loading warranty: none one used hacksaw, make KASTO, type EBS 320A, year of production 1963, general overhauled in 1972
used
number of spindles:6 spindle passage:40 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL
used
Standard configuration Basic system incl. peeling device and measuring device for sheet thickness Max. sheet weight 900 kg Loading Max. sheet size 3000 x 1500 mm Min. sheet size 1000 x 1000 mm Max. sheet thickness 25 mm Unloading Min. part size 150 x 150 mm Max. sheet thickness 20 mm ? Installation symmetrical ? WITHOUT loading station
used
number of spindles:8
used
number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW
used
number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW
used
saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m
used
Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness 25 mm max. sheet weight 900 kg Basic system incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake, incl. loading / unpacking station Basic configuration: ? synchronous loader ? peeling device ? measuring device for thick sheets ? movable unloading rake ? raw material unpacking station ? maximal stack height on loading side is 90 mm ? maximal stack height on unloading side is 250 mm LiftMaster Compact options ? Additional pallet for finished parts ? Separation of thin sheets (s=1-2 mm) ? Scraper for slats (cleaning brush) ? Storage interface
used
number of spindles:6 spindle passage:67 mm cam controlled multi spindle automatic lathe six main spindles D=67mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
used
number of spindles:6 spindle passage:81 mm cam controlled multi spindle automatic lathe six main spindles D=81mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
used
For sale we offer a strapping machine Model TV02 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. The fully automatic strapping machine TV 02 convinces with maintenance-free direct drives and Simplest operation. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Conveyor belts with four belts Strap closure off-center SPECIFICATIONS Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm min. 160 mm Height: max. (without press) 650 mm (with press) 550 mm min. 10 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. ...
used
number of spindles:6 spindle passage:100 mm cam controlled multi spindle automatic lathe six main spindles D=100mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
used
For sale we offer a strapping machine model TW01 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Transport Rollers Specifications: Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm max. (with side straps) 460 mm min. 160 mm Height: max. (without press) 500 mm max. (with press) 400 mm min. 30 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. 450 mm Width: 165-210 mm Electrics 230 V, 1 phase, 50 Hz Power consumption 1,1 kW at 230V Pneumatics Operating ...
used
GENERAL Project No.: 905433 Quantity: 1 pcs. Manufacturer: TORNOS BECHLER Type: MultiDeco 20/6 Control: Tornos Bechler Fanuc PNC Deco Year of construction: 2001 Condition: Used machine Machine on approx. (hrs): 77,725 Layers approx.: 2-3 layers DESCRIPTION TURN 18 axes turning diameter 20 mm 6 pcs. main spindle(s) speed main spindle 6000 1/min power main spindle at ED 10-40/100% 15 kW ADDITIONAL EQUIPMENT Splash guard cladding with fully encapsulated working area Lighting in the workroom Preparation for central oil/emulsion mist extraction system Hinged belt chip conveyor MAYFRAN Consep 2000 Machine is/was operated with oil Coolant device Automatic CO2 fire extinguishing system Bar feeder/bar loading magazine ROBOBAR MSF 522/6 GENERAL TECHNICAL DATA Total power requirement 43 kVA Machine dimensions (LxWxH) approx. 3500x1600x1950 mm Machine wei ...
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
4 up Thermal CTP System AGFA Avento II S (Same as Screen 4300 S) year: 2008 32 diodes 102.000 plates produced with Singel Loder with Stacker with RIP Harlequin with few packages of offset plates In case you need chemical Processor we can offer separatly. Located German available now
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
used
Year 1991 333 966 HOURS WITH STACKER The information below were taken from the documentation given by the seller. Maximum Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Forming Above-Below Material 100 / 30 mm Maximum Cycles-Minute 20 Total Width incl Control Cabinet 1930 mm Total Length incl roll stand 6330 mm Total Height 2050 mm Total Weight 3000 kg
used
Number of axes: 6, x-travel: 240mm, y-travel: 350mm, z-travel: 350mm, U-travel: 9500mm, A-travel: 360°, max. bar length: 7500mm, max. workpiece weight: 500kg, work spindle power: 4.55kW, suitable for drilling, milling, thread cutting, aluminum cutting, has been regularly serviced, with documentation and roller conveyors, on-site inspection is possible.
used
There are ten Automatic Lathes Hahn & Kolb DM 127 available, five more machines are available as spare parts donors, documentation, spare parts and accessories available, have been regularly serviced, inspection is possible.
used
X-travel: 180mm, z-travel: 430mm, max. chuck diameter: 160mm, weight: 10t.
used
Connected load: 2.6kW, length: 700mm, width: 1700mm, weight: 710kg, including bar feeder IEMCA MINI BOSS 325 CNC/ 32, with documentation, on-site inspection is possible.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.