autom used for sale

Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...

Automatic Angle Grinder 130 mm Completely made of special stainless steel Speeds: 2 of the working worm and 2 of the feeding worm Holeplate diameter: 130 mm 400 V, 3 Ph, 50 Hz Hopper capacity approx. 130 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 110,0 (120,0) Height: 135,0 (185,0) Installed power: 18,0 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg

Horizon AFC 746 D - cross folder 16 pages year 2019 Counter 73 million good condition in production available immediately

Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.

Selectomat System Schlatter RMB EMBA 18

Automation SheetMaster ? Standard configuration ? Suction frame 3000 x 1500 mm ? Peeler cup ? Vacuum sensor ? Central lubrication ? Sheet thickness sensor for double sheet check ? Control TASC 100 ? Clamp closing automatically ? Peeling system ? Suction plate module GripMaster 3000 x 1500 mm ? GripMaster Standard / 1600 ? With the following configuration: ? GripMaster Standard ? Scissor table 400 mm ? Sheet skeleton grippers with sensor ? Scrap skeleton pallet tiltable, 3000 x 1500 mm ? SortMaster Box ? TooMaster with 40 stations ? Store interface ? Safety devices for connection to storage system incl. 1st light barrier circuit

Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: The transport rollers must be replaced.

Loading unit: LMZ 3050 suitable for: L3030 and L3050 Max. sheet size, load/unload: 3000 x 1500 mm Max. sheet thickness, unload: 20 mm Cycle time: 230 sec

Loading device LoadMaster including loading station with fanning magnets Loading Sheet size: 3000 mm x 1500 mm Min. sheet size : 1000 mm x 1000 mm Max. sheet thickness: 25 mm Max. sheet weight: 900 kg

Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness 25 mm max. sheet weight 900 kg Basic system incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake, incl. loading / unpacking station Basic configuration: ? synchronous loader ? peeling device ? measuring device for thick sheets ? movable unloading rake ? raw material unpacking station ? maximal stack height on loading side is 90 mm ? maximal stack height on unloading side is 250 mm LiftMaster Compact options ? Additional pallet for finished parts ? Separation of thin sheets (s=1-2 mm) ? Scraper for slats (cleaning brush) ? Storage interface

For sale we offer a strapping machine Model TV02 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. The fully automatic strapping machine TV 02 convinces with maintenance-free direct drives and Simplest operation. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Conveyor belts with four belts Strap closure off-center SPECIFICATIONS Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm min. 160 mm Height: max. (without press) 650 mm (with press) 550 mm min. 10 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx.  ...

Standard configuration Basic system incl. peeling device and measuring device for sheet thickness Max. sheet weight 900 kg Loading Max. sheet size 3000 x 1500 mm Min. sheet size 1000 x 1000 mm Max. sheet thickness 25 mm Unloading Min. part size 150 x 150 mm Max. sheet thickness 20 mm ? Installation symmetrical ? WITHOUT loading station

For sale we offer a strapping machine model TW01 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Transport Rollers Specifications: Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm max. (with side straps) 460 mm min. 160 mm Height: max. (without press) 500 mm max. (with press) 400 mm min. 30 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. 450 mm Width: 165-210 mm Electrics 230 V, 1 phase, 50 Hz Power consumption 1,1 kW at 230V Pneumatics Operating  ...

Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional Delivery: ex site, including truck loading Operating instructions are available

We constantly overhaul Martin T90, T90 profile and Martin T92 If you have any questions, please call us or email us. We speak Dutch, German, English and French. Brand: MARTIN Type: T90 Year of construction: 1991 M-No.: V188134 Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 12 - 260 mm Planer thickness: 8 - 160 mm Roll forming depth: Vertical spindle max. 12 mm Horizontal spindle max. 8.5 mm Thickness adjustment: NC and electrical adjustment Width adjustment: NC and electrical adjustment (optional: automatic pendulum axle control) Head measurement: 100 programs memory Spindles: Bottom: Tersa Z-4, ø125 mm, 5.5 KW Right & Left: Tersa Z-4, ø125 mm, 7.5 KW Top: Tersa Z-4 ø125 mm, 5.5 KW Speed: 6,000 rpm Feed: 4 – 25 m/min infinitely variable Min. product length: 380 mm Central control ...

- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012

spindle passage: 12 mm Control: Fanuc type: LB 2 bar loader: FMB total power requirement: kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5 threading device 1x threading spindle pick-up spindle broaching device set of cams set of collets bar-loader Cucchi Giovanni (YOM 2004)

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

Pneumatic material feed Feed length: 800 mm (multiple stroke possible, max. 2,400 mm) saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spraying device Piece counter with automatic switch-off Weight: 600 kg

BÖHL JUNIOR S-450 VA Verpackungsvollautomat für alle Arten von Langgut Produktabmessungen • Breite 80 – 220 mm • Höhe 50 – 100 mm • Länge ca. 2.000 mm bis 6.000 mm • Gewicht ca. 30 KG • Maximale Querschnittdiagonale 311 mm Packmaterial • PE-Stretchfoliendicke ca. 7 – 50 my (empfohlen 23 my) • Rollendurchmesser 220 mm • Rollenbreite 250 mm • Hülsendurchmesser 76 mm Leistungsbeschreibung • Wickelring D = 450 mm Innendurchmesser • Geschwindigkeit max. 20 m/min. (frequenzgeregelt) • SPS-Steuerung Siemens S7-200 mit Touchpanel • Steuerspannung 24 V DC • Anschlussspannung 3 x 400 V – 50 Hz • Leistungsaufnahme ca. 2 KW • Sicherung 25 A • Geräuschpegel 79 db • Betriebsdruck 6 bar • Luftverbrauch ca. 20 Normliter pro Zyklus Technologie • Automatisches Glattschnitt-Schneidwerk für das Verpackungsmaterial • Ve ...

Haemonetics ACP 215 Automated Cell Processor. The ACP 215 Automated Cell Processor is the world's first and only automated, closed-loop red blood cell processing system. It minimizes the risk of bacterial contamination and provides donor centers and hospitals with the security and flexibility they need. Whether your facility is washing red blood cells, stockpiling rare blood supplies, or building a complete strategic blood bank program, Haemonetics is here to help you every step of the way to execute your entire plan.

Horizon Cross Folder Model AFC-504AKT Machine is in stock and is immediately available

Collamat 3600 pages labeler Currently in stock Immediately ready for use

Tehabo Model ERU 2500

WEINIG four-sided planing machine, PM 17, 5 spindles Machine No. 1329-2356 Year of manufacture: 1982 Working width 170 mm Planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm Feed table length 2000 mm with planing heads 6 spindles arrangement: 1. Bottom 4 kW 2. Right 3 kW 3. left 5.5 kW 4. Top 5.5kW 5. Bottom 4kW / universal Spindle diameter approx. 35 mm Feed speed 6.5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads Dimension 4500 mm x 1300 mm x H 1500 mm Weight approx. 3800 kg Technical data subject to correction

BÖHL JUNIOR S-450 VA fully automatic packaging machine / wrapping machine for spiral wrapping of long goods with packaging material (typical stretch film) Product Dimensions • Width 15 – 220 mm • Height 15 – 120 mm • Length approx. 600 / 800 mm to 6,000 mm • Weight approx.max. 3000 KG / 6 meters incl. car Maximum cross-sectional diagonal of the product: 220 mm (customized) Attention: max. weight only possible if driven by the on-site roller conveyor. (A) 600 mm without trolley (B) 800 mm with trolley or distance between carriages min. 600 mm Packaging materials • PE stretch film thickness approx. 17 – 50 my (recommended 23 my) • Roll diameter max. 400 mm • Roll width max. 125 mm • Sleeve diameter 76 mm Specifications • Winding ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency controlled) Specificatio ...

Automatic hardness testing device with 4 heads Micro IRHD IRHD Type L IRHD Type N IRHD Type H The device needs gibitre software installed on the computer to work. The device consists of a stand and 4 heads

Automatic hardness testing device with 3 heads Shore 00 Shore A Shore D The device needs gibitre software installed on the computer to work. The device consists of a stand and 3 heads

Tamper Evident labelling machine for applying labels to both sides of folding boxes. Machine incl. PCE Pharmacontrol Pilot 4.1.0. which controls and manages units such as printer, cameras and scanner. Labeller is fitted with WOLKE Printer

Stock Number: 3789 CNC LATHE Manufacturer: OKUMA, Type: LVT 300-M - Vertical Machine NO.: 132230, Year of manufacture: 2007 Specifications: Max. swing diameter 280 mm dia. Turning length 200 mm Main engine power 22/15 kw Main spindle speed range 40-4000 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Driven werkzeuumdr. 40-4500 rpm Control OSP 200 Fabr. Operating hours spindle 11485 hours Accessories: Load and Unload device Tool setter Chip conveying. Cooling water system. Length: 2800 mm, Height: 2500 mm, Width: 1500 mm , Weight: 5600 kg

Automatic labeller for the application of self-adhesive vignettes and tamper evident seals. Balcony design. Capacity: up to 180 pcs/min. The machine is equipped with: - PLC SIEMENS, type S7-300. - HMI PC SIEMENS IPC 677 - Dopple REAJET printing system, type HRpro with camera control system - Preparation for Vision System LAETUS WT Commandor - Carton Transport Belt: pitch 250 mm - Various control systems for label presence with ejection etc.

Workpieces are fed in bulk, checked, bad parts are sorted out and good parts are placed in containers as bulk goods. Workpiece: Bolt, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - high-resolution matrix camera (21 Mp), dimensions - Line scan camera (4K), surface inspection Parts bunker SKAKO, 71 l volume HSMA07903 up to 125 kg in stock Original price: € 230.000,-

AUTOMATIC SLOT MORTISER type BACCI MOD second hand machine machine with cast iron structure machine according to CE regulations: YES electronic oscillation speed spindles with inverter max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.16 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9500 net weigth kgs. 700 volt. 380/50

Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)

Continuous rotary table HAU R60-1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800 mm, 3 polishing units with 7.5 kW each, polishing shafts 50 mm diameter, max. polishing wheel width 2 x 400 mm + 1 x 280 mm, max. polishing wheel diameter 420 mm, motorized longitudinal and height adjustment – machine equipped with complete. Application system for liquid polishing paste More pictures on request

Rotary indexing table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized height adjustment, liquid paste system (guns + pressure tank), incl. control cabinet Price and further details on request.

Label dispenser Macro SP12 right side RA1956 Manufacturer: Schwinn Model: Macro SP 12 Year of manufacture: 2018 Alignment: right Label passage: up to 115 mm Label speed: 1-18 m/min Maximum diameter label roll: 300 mm Core diameter 40 mm expandable with adapter Power supply: Euro plug 230/50Hz Integrated control with control parameters, controllable inputs and outputs, fault messages,... Additional equipment: Start triggering external AP 010-500 Vacuum Applicator Module Maintenance - equipment - combination Core adapter AP 031 Prewarning - label supply Mounting frame Control box Warning light, 3-stage Features: nominal voltage: 50Hz, 230 maximale Etikettengröße: 115 Etikettengeschwindigkeit: 1-18 m/min Kerndurchmesser Rolle: 40 mm maximale Größe Etikettenrolle: 300 Etikettendrucker enthalten?: NEIN Etikettenaplikator?: Stempel Vorwarnung Etikettenvorrat: JA Hub Aufklebestempel: 500 m ...

saw blade diameter: 250 mm cutting diameter: 50 mm revolutions per minute: 27/54 U/min output: 1,5 kw dimensions: 1,4 x 0,75 x 1,3 m weight of the machine ca.: 0,6 kg Used automatic cold circular saw - 3m roller conveyor - man. lenght stop - Blade hole Ø 32 mm - coolant system - 16 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drill ...

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - wood - aluminum - bronze - GRP (glass fiber reinforced plastics) - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind hole ...

Ref. -No.: 10197 Manufacturer: N/A Storage location: Halberstadt

Ref. -No.: 10198 Manufacturer: N/A Storage location: Halberstadt Further information: autom. welding station with positioner

Ref. -No.: 10195 Manufacturer: ESAB Storage location: Halberstadt Country of origin: Schweden serial number: 620-703-3544

Manufacturer: HEIN Type: CFR-210-255 SN: Device 1: FR-210-112 Part Number: 080996-1 / Device 2: FR-210-112 Part Number: 080996-2 Year of construction: 2009 Width 2.25m Height 2.5m Length 2.1m

Heinrich Hutze & Co. Metal Hacksaw Manufacturer: Heinrich Hutze &. Co. Type: Metal Hacksaw Electricity: 400V, 16A Machine saw blade: 500 mm Sandflex MM 500-38-2,0 More items - new and used - can be found in our shop! International shipping costs on request!

Professional and high-performance strapping machine from a renowned European manufacturer with internal frame dimensions of approx. 650 x 500 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated threading system as well as a reel quick-change system. -Strapping tension adjustable. -Soft tension possible. -Automatic belt insertion. -Strapping release on both sides via foot pedals. -Wear-free belt guides with quick-change system. machine can be moved and locked via castors. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams. The machine was checked or overhauled by a service technician. It can be demonstrated under electricity.

Key data: 320 mm, 5350 mm, 320 mm

Horizontal saw with position control Cutting area round: 320 mm Rectangle cutting area: 320 x 320 mm Band saw dimensions: 5250/5350 x 32 x 1.1 mm Belt speed: 15 - 110 m/min Saw drive: 380 V, 4 kW Weight: 2200 kg

Automatic Groove and Grip Hole Eyelet Machine Hang Type 115-20 incl. Conveyor Belt and Ceiling Magazine Built in 1988 OKU-Automatic eyelet sorter, Conveyor belt Length 2,500, width 500 mm, Folding unit HANG, Benefit Investors Machine is in good condition

Belshaw Mark VI Automatic donut fryer Serial: 22682 2018, 4 wide automatic fryer for donuts, 1000+ donuts per hour, adjustable speed, timer and temp controls, with infeed conveyor, 1Ph