autoclave used for sale

autoclave with a capacity 90 liters, used, very good condition. With full documentation, all valid UDT inspections, equipped with 2 baskets, a container for external condensate, gloves; does not require direct access to the water supply. Permissible pressure - -1 / 2.8 bar. Temperature range 0/138 degrees C. Medium - demineralized water. dimensions - 740x915x600 mm.

Sells autoclave class B 75L colussi from 2019, Maintenance done Works very well

Autoclave from Spomasz-Pleszew Factory number 112 Maximum working pressure 4 bar Maximum operating temperature 5/151 degrees Celsius Capacity 3410 L Test pressure 6.3 bar Weight 2240kg CURRENT UDT AUDIT BOOK Made of carbon steel 12 pieces of trolleys included.

Steriflow 1341 EA Autoclave Year : December 2008 Inlet capacity : 5 390 liters Test pressure - PT : 8,6 bar Design condition : 5 bar 150 C Minimum allowable condition : 0 bar at 0 C Maximum allowable condition : 5 bar at 150 C

Bench top autoclave LABOKLAV25 V, 25 litres ; - INTERNAL LABOKLAV 25 PRINTER ; - Tank 265x465 ØxD mm, outer dim. WxHxD 440x540x660, mm ; - Weight appr. 65 kg ; - Power supply 230 V-50 Hz ; - 20 programmes, all customisable, standard programmes according to version; - All LABOKLAVs are equipped with an external steam generator according to the principle of a dry stone (the heating elements are not in the water, the consumption of the energy consumption is reduced and the service life is increased); - They are also all delivered with a water condensation system at the drain. (pipe protection).

laboratory autoclave Capacity: 75 litres. Steam sterilization: temperature 115 to 134º C; pressure 1.2 to 2 bar; time from 1 to 60 min. Triple safety system (safety thermostat, manual devaporization valve and overpressure safety valve). Built in stainless steel. Manual closing. Four wheels for transport. 220 V single phase; 3300W Operation manual available

MARRODAN 3 BASKET STATIC AUTOCLAVE Total power: 11 Kw Voltage: 380 V Frequency: 50 Hz Maximum working pressure: 5 bar Maximum temperature: 150º Volume: 4407 liters Test pressure: 7.86 bar Model: PR18256 Year: 2004 Height: 1930 mm Length: 3070 mm Width: 2040 mm

Functional and with instructions Volume of the room: 298 litres Heat source: Steam Exact model and year of manufacture: Year 1999 - Manufacturing N° 991808 - Manufacturer Lequeux Dourdan Is the heat source supplied with the appliance? (electric, is it contained in the machine - steam, are the boiler and pump supplied): Yes, everything is supplied. It is as is. It has not been in use for several years. No basket sold with the autoclave.

Astell ASB 290 is a front-loading industrial lab autoclave for the sterilisation of lab equipment in medical, manufacturing and testing labs. The chamber has a 275 litre capacity. Volume: 275L Chamber diameter 600mm Chamber Depth: 885mm Loading Height: 730mm two machines available price each

Autoclave IROP B/11 E1500/6.5/165 for 24 truck tires IROP autoclaves are manufactured to international standards, in collaboration with internationally recognized organizations such as Bureau Veritas, TUV, Lloyd and Hartford Steam Boilers for product certification. IROP autoclaves have CE, ASME and other certificates.

Used autoclave KORIMAT, type: KA 380 -in very good condition- - Kettle volume: approx. 380 L (approx. 500 cans á 300g) - electrically heated, 25 KW - Operating pressure 1 to 2.5 bar - incl. 4 pieces of 1/2 high baskets - incl. lifting bar - Condition: Very good, technically and visually perfect, only 60 applications - Sterilized only cans, no boiling - Delivery time: immediately available - unpacked from stock Technical data: Boiler capacity: 380 litres El. Connection: 3x 230 / 400 V, 50 Hz El. Power: 25.0 kW Operating pressure: 1 - 2.5 bar Ab. Temperature: 2°C - 138°C Inspection and test run possible. Subject to prior sale.

Used autoclave - spray sterilizer by Spomasz Pleszew type WSA 7B. New 1991. Technical data: - Working volume: 3.41 m3 - Temp. T0= 151 ºC - Working pressure: 0.4MPa - Weight: 3653 kg - Feed quantity: 4 baskets Automatic temperature and pressure controller + computer for data recording and entry. Good condition, as shown in the photos. Machine in working order. No baskets.

Lubeca autoclave, type: 2020 ST 4, number: 4771, year of construction: 1996, volume: 3570 liter, inside dimensions: 3600 mm x 750 mm x 750 mm, total dimensions: 5100 mm x 1550 mm x 2630 mm. Including 2 pallets with parts.

Lubeca autoclave, type: 2020 ST 4, number: 4638, year of construction: 1992, volume: 3570 liter, inside dimensions: 3600 mm x 750 mm x 750 mm, total dimensions: 5100 mm x 1550 mm x 2630 mm. Including 2 pallets with parts.

Lubeca autoclave, type: LW 2020 POS 4, number: 1240, year of construction: 1984, volume: 3570 liter, inside dimensions: 3600 mm x 750 mm x 750 mm, total dimensions: 5100 mm x 1550 mm x 2630 mm. Including 2 pallets with parts.

Hirayama Manufacturing Corporation autoclave, model: HV-50 L, serial number: 991183362, year of construction: 1999, 230 V, 50-60 Hz, 2.0 kW, chamber capacity: 0.0543 m³, dimensions: 550 mm x 550 mm x 1100 mm.

Lubeca autoclave, type: 2020-RoS 4, number: 4769, year of construction: 1996, volume: 3570 liter, inside dimensions: 3600 mm x 750 mm x 750 mm, total dimensions: 5100 mm x 1550 mm x 2630 mm. Including 3 pallets with parts.

Lubeca autoclave, type: 2020 ST 4, number: 4761, year of construction: 1995, volume: 3300 liter, inside dimensions: 3600 mm x 750 mm x 750 mm, total dimensions: 5100 mm x 1550 mm x 2630 mm. Including 2 pallets with parts.

Systec GmbH autoclave, type: VX-95, serial number: 6353, year of construction: 2015, 3 x 400 V, 50/60 Hz, 15.5 A, design temperature: -10 / 150ËšC, design pressure: -1 / + 4 bar, volume: 104 liter, dimensions: 800 mm x 550 mm x 1200 mm.

Lubeca autoclave, type: 2020 ST 4, number: 4764, year of construction: 1995, volume: 3570 liter, inside dimensions: 3600 mm x 750 mm x 750 mm, total dimensions: 5100 mm x 1550 mm x 2630 mm. Including 2 pallets with parts.

STATIC AUTOCLAVE WITH 4 BASKETS MARRODAN Without renouncing to the most advanced technology, Marrodáns range of autoclaves is an optimal option for small and medium-sized companies. Sectors: - Food: canned food, vegetables, fish, meat, dairy, baby food, ready meals, etc. - Pharmaceutical: bags, glass vials, etc. The system maximizes the transfer of thermal energy to the product in each case. Outstanding features: Decreased process times. Fo control and guarantee. Homogeneity (cold zones are avoided). Repeatability of the process. The different technologies allow adapting the equipment to the product requirements regardless of the container and its format (metal, glass, plastics, etc.). MEASUREMENTS: Length: 4700 mm Width: 2040 mm

Korimat KA 120, autoclave, with 3 basket inserts, new wheels, Connection 400V, 9kW, year of construction GÜ 1993, weight approx. 144kg, used, functional, as returned by customer

Autoclave DENTARES Dentaclave B USB built in 2010, S/N 10401, tabletop, USB stick

New autoclave Manufacturer: Getinge AB, Sweden Type GE 666 AR-1 YOC 2019 Usable chamber size 660 x 672 x 660 mm (WxHxD) Volume of the chamber approx. 298 liters External dimensions: approx. 1,450 x 3,000 x 1,700 mm (WxHxD) Weight 750 kg Service Lead Left Hand Single-door model with automatic vertical sliding door GMP

Used autoclave ASCA 215 liters -refurbished- - 215 litre boiler - electrically heated - Completely overhauled - incl. 2 baskets - incl. pressure test and certificates as well as certificates will be handed out - Condition: Very good, ready for immediate use - 6 months warranty - Delivery time: 1 week after order order Due to the high working pressure and temperatures, we are subject to the Pressure Equipment Ordinance. As a result, our devices are always overhauled and approved by experts. The device is in pristine condition and ready for immediate use. Viewing and test run are possible by arrangement.

Autoclaved Aerated Concrete AAC Production Line, Porenbetonwerk, Aerated concrete plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

Length: 7,90 m Overall height: 2,40 m Overall width: 2.00 m Heating power (electric): approx. 40kW Thermal insulation Year of manufacturing: 1988 Working pressure: 6,7 bar Working temperature: 120°C Volume: 12,914 liters Internal diameter 1600mm

Product number: 2402 Type: LW 3014 ST Serial number: 44343 Year of construction: 2006 Capacity: 7 baskets Inside diameter: 1100 mm Inside length: 5210 mm Volume: 11200 litres Heating: steam, max 2000 kg/hr Steam pressure: 4 Bar, DN80 Cooling water: 3 - 6 Bar, DN100 Compressed air: 6 - 8 Bar, 37 Nm³/min Power: 3 x 400V, 50Hz, 36kW Baskets: 18 pieces, stainless steel Inside dimensions baskets: 870 x 920 x 910 mm Dimensions: 9000 x 2000 x 2400 mm Including Alfa Laval M10-MFG heat exchanger Including stainless steel tank for condensate Including OKS Otto Klein 3000 litre pressure vessel

High temperature oven LDO-250T High-temperature chamber (dry-heat oven) for sale. Used, in excellent condition - 2 pcs.

Used a few times and viewed every year by a specialized technician.

Type: two-door pass-through type Sterilization method: superheated water Camera size: 900х1450х2500mm Chamber volume: 3.25m3 3 carts can be placed in the camera. Each cart can accommodate 5 trays. The set includes more than 20 carts and more than 200 trays.

Product number: 2837 Type: MLS-3020 Serial number: 4Z0185 Chamber: Ø 300 x 670 mm, 48 litres Sterilization temperature: 105 - 121 °C Pressure gauge range: 0 - 0.3 MPa Power: 230VAC, 50Hz, 2kW Dimensions: 440 x 550 x 1050 mm Weight: 69 kg

2 Industrial GAS AUTOCLAVES for food sterilization (mushrooms and canned foods). In excellent condition. They are gas powered with an industrial sterilization system, little has been used for the sterilization of mushrooms. The dimensions are 130cm wide by 160cm high. The general conditions are very good. Equipped with vertically removable stainless steel basket Approximate capacity between 200 and 250 liters

Vacuum autoclave for incorporation with epoxy resins vacuum max 0.1 mbar Carbon steel profiles and sheets Internal and external finish with a coat of anti-corrosion paint and 2 coats of epoxy paint Useful internal dimensions: - Width 1300 mm - Length 4000 mm - Height 1000 mm Overall dimensions: - Width 1700 mm - Length 4300 mm - Height 1900 mm Accessories. Workpiece carrier d mm. 1200x3900 height 200 mm wheels with V groove door max 500 kg Estimated time to empty the autoclave with pump 305 m3 / h at 5mbar - minutes 8 Year 2018, very few hours of work The autoclave is not made to go under pressure, this spot is used to remove the air and creates a depression makes the vacuum up to 1 bar The machine is fully functional, it can be seen running until November.

Scholz Autoclave 1.5m diam. x 3m long Electric heating Welded construction Quick lock door Year 1990 Working pressure 7 bar Working temp; 150deg C

General SKU300U902 LocationBarneveld MakeKSG TypeKSG112 No.4429 Year of construction1994 Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume28 Ltr. Pressure2.5 Bar Specified Features - Autoclave Horizontal autoclavecheck Capacity28 Ltr. Internal width240 mm Internal depth490 mm Internal height240 mm Inlet/Outlet240x240 mm With trayscheck 7 pieces Tray sizes350x185x70 mm Max. temperature138°C Electric heatedcheck Electric capacity220Volt, 3kW With timercheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information With switchcheck Weight67 kg Floorspace0,55x0,60 m Total height0,43 mOther pharmaceuticsAutoclavesKSG SterilisatorenIndustries > Pharmaceutical > Other pharmaceuticsAutoclaves > AutoclavesBrand > KSG Sterilisatoren What you can expect from Foeth: -- Machine is in working condition -- At a reduced  ...

Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

Tyre retreading plant Complete production plant retreading plant for cold-retreaded truck tyres Output: up to 200 pcs/day Equipment: Pos.1 Rail System "Helm 500" Frame/Supports Manufacturer TRM Rail length approx. 110m, rail height approx. 2m 76 hooks with rollers 3 processing stations incl. extraction connections Spray tunnel for rubber solution incl. extraction Year of construction: 2008 Pos. 2. Roughening machine Matteuzzi RAS 90 DC 4 defect (drive shaft defective) Manufacturer: Matteuzzi Type: RAS 90 DC4 Machine number: 522 Year of construction: 2004 Pos. 3. Roughener Matteuzzi RAS 98 E ULTRA (as good as new) / Training device from training center Manufacturer: Matteuzzi Type: RAS 98 E Ultra Machine number: 522 Year of construction: 2013 Pos. 4 Roughening machine Bandag EHRD 23 X Machine number: 1031 Year of construction: 1993 Pos. ...

TECHNICAL DATA: Autoclave dimensions mm: 350 x 2000 Autoclave volume lt: 175 Installed electrical power KW: 55

Korimat KA 160 autoclave, 240 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine at our facility in 56070 Koblenz, Germany.

Used Complete Bottling Line Alfatek 2018 HPE HIGH PRESSURE ELECTRONIC MONOBLOCK FILLER CROWN CAPPER ALFATEK Mod 9 1 Machine suitable for bottling fermented beer in the autoclave The complete bottling line for wine and beer is supplied ready with connection points for air product discharge point and electrical connection Max production 900 1000 BPH with carbonated product e 0 33 cl bottles Maximum valves flow rate l h 1250 Maximum machine rotation speed 400 2000 Filler pitch diameter 600 mm Pitch capper diameter 410 mm Maximum bottle diameter 115 mm N B Production may vary according to the type of product to be bottled bottling pressure product temperature type of bottle etc Condition of the beer product a constant and adequate pressure b constant temperature 0 2 c rested product not overflowing The monoblock is composed of FILLER Series BHPE ELECTRONIC ISO BARICA HIGH PRESSURE 9 valves S ...

Cylindrical and fixed horizontal autoclave, used to sterilize food products. The equipment is totally made in stainless steel AISI-304. Manufacturer: VYC INDUSTRIAL, S.A. Type: AE-7800 Year: 2002 Maximum service pressure: 2 bars Design pressure: 2 bars Bell pressure: 2 bars Hydraulic test pressure: 3 bars Maximum service temperature: 110°C Design temperature: 150°C Elactic limit in design temperature: 140 n/mm2 Volume: 7,8 m3 Contained fluids: water/air 8 baskets in stainless steel and 6 trolleys are included. Cage dimensions: inside 980mmx1000mmx950mm. Outside 1070mm x 1060mm x 975mm. Recently overhauled and in perfect working order.

USED FMC FOODTECH A144 AUTOCLAVE REF#: C6849 Sterilizer A144 manufactured by FMC FOODTECH General characteristics: Maker FMC FOODTECH Model A144 Year of manufacture 2006 Weight 2240 kg Maximum working pressure 4 bar Test pressure 5.72 bar Pressure safety valve 4 bar Maximum working temperature 205 ºC Steam conditions min. 6 bar / max. 7.5 bar Air conditions min. 5.5 bar / max. 6.5 bar Cooling water conditions min. 3 bar / max. 5 bar Capacity 6820 L Engine features: Tension 380 V Power 10 kW Frequency 50 Hz - 3P

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

AUTOCLAVE HOBART Manufacturer HOBART model 304. The Hobart 304 pressure cooker is the fastest and most cost-effective way to produce the highest quality end product, while retaining all natural vitamins and minerals. Used equipment, its condition is excellent, fully restored and with guarantee. Cooking with dry steam, under pressure, produces food of exceptional color, appearance and flavor. It has an automatic one-touch control. The Hobart has a stainless steel cooking compartment and has the function of automatic defrost. The Hobart can produce 650 servings per hour. Power supply - 400/50/3 / N. Water supply (5) - R 3/4 ". The dimensions of this machine are: - 600 x 810 x 1000. It has 4 heights inside. Tray measurements for each height: 520 mm x 330 mm. This is a used item, but in good condition and in perfect working order. Pressure cooker, pressure steamer. Used equipment, its con ...

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 270/975, year 2001, capacity 5 Kg per batch, autoclave diameter 270 mm, delivered with 1 carrier with 1 sword, sword useful loading height 975 mm, add vessel

Offer an autoclave from Newmed here. The control panel is slightly darkened in the middle.

2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 550/975, year 2001 and 1989, capacity each 20 Kg, autoclave diameter 550 mm, The 2 machines are delivered with total 2 bobbin carriers with 4 swords each, each word has a useful loading height 975 mm, add vessel on each machine, the 2 machines share the same electrical cabinet which was supplied by LORIS BELLINI in 2001