auto parts used for sale

Type: RS 160 - center height: 140 mm - spindle thru-hole: 40 mm - alowable work diameter: 160 mm

We sell used car parts such as engines, gearboxes, drive shafts, body parts from all common car brands

MCM00B0-SMLT Micro Design

BU62-60-30-B-003 built-in rectifier device BUS21-30/60-30-001

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Welding current transmission Bum with counter bearing and SEW Eurodrive drive + Braking resistance Frequency converter is missing VAT not deductible Shipping possible

Continuous cleaning system - 2-bath facility (1st bath pre-wash, 2nd bath rinse) - Max. basket weight 80 kg - Distillation capacity approx.: 110l/hUltrasonic unit - Heating capacity : 13,2KW - Solvent content approx. 230 l Dimensions WxDxH 2600 x 2785 x 2340 mm

Press cylinder K260 S210 H8910 for use in scrap baler shears. Piston diameter - 260 mm; rod diameter - 210 mm; stroke - 8,910 mm Operating pressure: head side - 180 bar; Bottom side - 225 bar;

Used new three-jaw chuck RÖHM DURO T250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners ♦ cylindrical receptacle for spindle flange Pictures: Three-jaw chuck No. 437478-1526 ♦ with as good as new base jaws and new top jaws: ♦ with feed key included: Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.

Control CNC 432 Ref. 4022 226 4280 D 004594

Inv. Num. : 7060 Type: Vaiocs-1 Producer: EMO Created: 1998 Parameters: Control system: SIEMENS SIMATIC Tank dimensions: 530 x 320 x 200 mm Machine dimensions: 4950 x 4170 x 2310 mm

Description: Manufacturer number: 42099 Operating voltage: 230 V Frequency: 50 Hz Connection: 18 kW Rated current: 0.2 A Filling capacity: 50 L weight approx.: 60 kg, Approx. Onsite Dimension. (l x w x h): 630 x 600 x 1,200 mm

Description: Serial number: 866070619 Operating voltage: 400 V Frequency: 50 Hz Connection: 16.3 kW Rated current: 31.8 A weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 780 x 750 x 1,600 mm

Description: Dimensions of the washbasin: 650 x 650 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 900 mm, weight approx.: 200 kg

Description: Contents consisting of springs, pipe clamps, countersinks, vacuum accessories, deburring tool and various small Lots Approx. Onsite Dimension. (l x w x h): 400 x 300 x 1,200 mm, weight approx.: 70 kg

Description: Content consisting of various indexable inserts, mostly from the manufacturer INGERSOLL and WALTER Approx. Onsite Dimension. (l x w x h): 400 x 250 x 470 mm, weight approx.: 50 kg

Description: Content consisting of various indexable inserts, mostly from the manufacturer SANDVIK, as well as various boring inserts Approx. Onsite Dimension. (l x w x h): 400 x 250 x 470 mm, weight approx.: 50 kg

Spare parts kit SIEMENS 6AV6671-5AE00-0AX0 for connection box DP Basic for Mobile Panels ( MPI/PROFIBUS ) used, tested ! Dimensions ( board ): 120 x 85 x 24 mm Dimensions ( packaging ): 150 x 90 x 60 mm

High-pressure washbasin with viewing window for manual and environmentally friendly use based on aqueous cleaners. Bsduoi7jo8 Specifications: Usable area / work surface: 1,200 x 700 mm Usable height: 400 mm Load capacity: 50 kg Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 lt /min Washing temperature: adjustable up to max. 45°C Fuel tank capacity: 170 lt Heating power: 4,000 W Total power: 8.0 KW Voltage: 400 V 3 Ph+N Frequency: 50 Hz Total weight: 180 kg Dimensions of the brush washbasin 1,480 x 991 x 2,080 mm (with the lid open)

Platform load: 350 kg/m² Year of construction: 2005 Location: Cologne

Approx. Onsite Dimension. (l x w x h): 600 x 400 x 200 mm, weight approx.: 40 kg

Description: Spare Parts for Tool Routing Machine weight approx.: 35 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm

Description: Lot Machine Spare Parts weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm

Description: Screws in various designs Sealing rings, tension springs, threaded bushes, welding studs, shim washers, clamps, dowel pins Approx. Onsite Dimension. (l x w x h): 2,700 x 150 x 1,000 mm, weight approx.: 200 kg

Description: Various spare parts for Koepfer 140 gear hobbing machines Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm, weight approx.: 75 kg

Description: Machining temperature 0 to 40° C Approx. Onsite Dimension. (l x w x h): 800 x 600 x 900 mm, weight approx.: 60 kg

Small parts shelves grey 3 pcs. each approx. 50x150h cm

Description: New list price: approx. 30.000,00€ Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 400 mm, weight approx.: 80 kg

1 batch of circlips for outside and inside, 1 lot of cylindrical pins and taper pins, approx. 30 kg 1 lot of oil seals

Description: Work surface 790 x 490 mm Working height 890 mm Without visible barrel Approx. Onsite Dimension. (l x w x h): 500 x 800 x 1,100 mm, weight approx.: 40 kg

weight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,500 x 1,250 mm

Approx. Onsite Dimension. (l x w x h): 2,300 x 1,900 x 1,200 mm, weight approx.: 500 kg

Description: Specification: Large lockable flap. Comfortable gloves. Multifunctional cleaning sprayer. LED lighting. Air blower. Readable manometer. Adjustable air pressure regulator. Removable cleaning grid. Removable filter for dirt. Removable water collecting tray. Internal dimensions (LxWxH) 550 x 730 x 400 mm Interior volume 185 l Operating pressure 5-8 bar Weight 50 kg Dimensions L x W x H 0.7 x 0.6 x 1.35 m Since this parts cleaner has a thermostat that can heat the degreaser to 50 degrees Celsius, it is advisable to use this degreasing cabin in combination with the Eurol cold degreaser HF Plus. This degreaser has a higher flash point than the usual cold degreaser. weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 700 x 600 x 1,350 mm

Description: Composed of several tool holders, clamps, tools and miscellaneous, including bench weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 500 x 1,200 x 1,150 mm

Approx. Onsite Dimension. (l x w x h): 2,150 x 1,850 x 2,400 mm, weight approx.: 1,665 kg

Description: Lot of accessories and spare parts for machines Different types, models and brands Check all photos for more information Delivered in plastic containers Trays not included Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 640 mm, weight approx.: 100 kg

Description: Utensilegno  , ,chain spare parts including chain nets of different types (type A, B and C),  , , various bearing sets, sprockets and grease nipples.  , Approx. Onsite Dimension. (l x w x h): 600 x 300 x 400 mm, weight approx.: 12 kg

Single batch of various types of machinery, non-compliant and to be reconditioned and recertified, and various materials in 20 metal baskets.

Description: • Lot of spare parts for wide belt sander • It includes: • 2 x BLOCK HFD 202-400/90 EMI-filter • 2 x SIMCO A2A7S power units • 2 x KUHNKE 140.656.00 PLC Control Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 250 mm, weight approx.: 30 kg

Description: . Approx. Onsite Dimension. (l x w x h): 280 x 490 x 430 mm, weight approx.: 90 kg

Description: . Approx. Onsite Dimension. (l x w x h): 600 x 200 x 300 mm, weight approx.: 16 kg

Description: Load capacity: 30 kg Pumping capacity: 80 l/min. Filling capacity 2 x 150 l Voltage: 400V Power consumption: 1.5 kW Approx. Onsite Dimension. (l x w x h): 1,600 x 1,360 x 1,560 mm, weight approx.: 430 kg

Description: Basket dimensions: approx. 750 x 700 mm weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 900 x 850 x 1,800 mm

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed