auto painting used for sale

Z640 Mixed Lot (134 pieces) Feed Pliers Automatic Lathe Lathe Turning Center probably for Index Traub or Schütte or similar machines

Cross folding machine Specifications : Pile feeder - separating head 4 motorized buckles 1 knife Gate fold Noise hood Batch counter LCD touch-screen control Belt delivery Formats : 558x850 – 128x148 mm

Used IWKA TFS 20 aluminum tube filling machine. Year of manufacture: 1989 Capacity: 40-120 tubes/minute Aluminum tube diameter: 10-52mm Supported dose: 2.5-500ml

Mori Say TM626 AC, - 5 axial slides, - 4 cross slides, - double slide pos. 6, - pickup spindle, - swarf conveyor with vibrating filter device, - high pressure coolant system, - set of tool holders, - IEMCA PRA auto bar loader L = 3 m, Country of origin: Czech Republic, Operating hours: 23.950, Number of spindles: 6, Max bar diameter [mm]: 26, Spindle speed [rpm]: 500 - 6.000, Spindle motor [kW]: 20, Total power requirement [kVA]: 40, Weight of the machine ca. [kg]: 5.500, Auto bar loader: Iemca PRA 40/33 P

Inv. Num. : 8570 Type: SU 50 A/2000 Producer: TOS Generated: Parameters: Maximum turning length: 2000 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter via support: 250 mm Weight: 3260 kg Equipment: Digital measurement

Offer 25230 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 335 mm - Square flat 500 x 335 mm - Automatic material replenishment machine 5 - 2300 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2400 x H 1950 x D 2200 mm - Weight approx. 1800 kg

on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request

Key data: 400 mm

What is sold is a Machine name: Automatic band saw Manufacturer: Bomar Model: CLS 800.400 Year of construction: 2017 Condition: defective relay Dimensions: 3850 x 1650 x 2250 mm Weight: 2800 kg A relay on the machine is defective and can be replaced if desired.

• For filling and sealing plastic tubes with heating jaws • Manual insertion and removal of tubes, further stations automatic operation • Stations: Filling, heating, sealing with embossing (1-line, max. 8 digits), cutting • Filling range 10-150 ml with piston dosing and rotary slide valve • Output approx. 100-800 tubes/h depending on product and filling quantity • Adjustable heating temperature • 10 tube holder cassettes for tube diam. max. 60 mm • Various tube holders for tube diam. 18, 22, 34, 36 and 40 mm • Electr. connection 220V/50Hz This machine is offered at a special price and sold as-is without technical inspection.

Series F2 4-part system: 4 tools engaged at the same time 15 axes System 1: 5 swivels 12 x 12 mm System 2: 8 driven tools (turret system 4) System 3: 16 tools (up to 16 of which are driven) System 4: 8 driven tools (tool turret system 4) C-axis on main spindle + 5° mechanical indexing C-axis on sub-spindle + 5° mechanical indexing up to 37 tools (32 driven)

3-part system: 3 tools engaged at the same time 12 axes 4-fold transverse machining up to 35 tools (26 driven) System 1: 6 turnings 12 x 12 mm or 5 x 16 x 16 mm, 4 driven tools transverse System 2: Y2 axle at the back (3 fixed + 6 driven tools) System 3: 2 x 8 station turrets with up to 16 driven tools C-axis on main spindle + 5° mechanical indexing C-axis on sub-spindle + 5° mechanical indexing C-axis on turret + freely programmable angle adjustment

Built in 1993 semi-automatic hot stamping press Embossing format max. 125 x 280 mm electr. Drive 1 foil preference 1 heating plate automatic feed Unwinding device for round materials / cans Underframe Delivery date: immediately from stock Price on request. We supply and install worldwide.

Auto stamping machine Friction Feeder and Inkjet Printer Model : KST-PCC100/L15 Zero One Two Three Five Four Seven One Three Four

Automatic Pile Feeder Multigraf PFA-52 (originally) - Own drive and vacuum pump (230V) - Side-lay register - Modularly expandable and customizable - with extra long feed table Paper format max. 520 x 1050 mm Grammage range up to approx. 500g/sqm The feeder was previously operated in combination with a UV varnishing machine., Year of build: Unknown, Type of control: conventional, Stock location: 75242 Neuhausen DE, Coutry of origin: Switzerland, Delivery time: immediately available, Freight base: free loaded truck

A precision glass grinding machine Carl Zeiss for pre-grinding optical workpieces is available. Workpiece spindle speed: 125rpm, tool spindle speed: 7000rpm, feed: 6mm/min, roundness and flatness accuracy: +/-0.005mm, swivel range: 50°, permissible repeatability: +/-0.01mm, measured repeatability (1990): +/-0.005mm. Documentation available. An on-site inspection is possible.

OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...

Number of spindles 8 Max. bar feed in one station: 130 mm Max. bar feed in two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment: +- 12 mm Max. stroke axial slide: 72 mm Max. stroke tool spindles: 106 mm Adjustment of tool spindles: +- 10 mm Main spindle speed: 500 - 4,000 1/min Piece time: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg

LBBC Autoclave Internal dimensions 1000mmx1500mm Type: Quicklock Thermoclave Heat rating 30kW 6 Vacuum bags Heating ramp 5°C/min, 218psig, 220 Kgs combined materials, Year 2001 Complete with material trolley, associated piping, control panel

package of 16x pieces Find more here - / Contact us at -

Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available.

Height=1.36 m, Overall length= 1.43 m, Overall width= 0.9 m, Net weight= 325 kg,

The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Fanuc Max. turning diameter: ø65mm Max. workpiece length: 300mm Turret head: 2x12 driven positions Bar feeder: IEMCA master 880 MP Cooling + chip conveyor

Features: belt feeder, Ero gluing system (cold glue, 4 nozzles), folding unit, pressing belt, max. sheet size: 60-800x126-1100mm, production possibilities: straight line, crash lock bottom, 4- and 6-corner, double-wall boxes and file covers/piches/envelopes, board thickness: 200-800g/m², corrugated board: N-, E-, F-flute, max. belt speed: 320m/min, shaking speed: 20m/min, main motor power: 11kW, total power requirement: 35kVA, max. air consumption: 0.7m³/min, length: 12,700mm, width: 2600mm, weight: 7t. Operational hours counter: 1494h. An on-site inspection is possible.

Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into intermediate sheets of the desired length, directly from the roll. Fully automatic sheeter PAL-Cut 800 sheet dispenser, which cuts intermediate layers quickly and precisely in the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rollers of max. 800 mm width. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 for roll width up to: 800 mm Mounting height: 1,368 mm Working speed: 480 pcs/h Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 More items - new and used - can be found in our shop! International shipping costs on request!

Canapa SAP 8 LA strapping machine Fully automatic strapping machine With integrated transport system - photocell-controlled In the SAP-8A/LA fully automatic machines, photocells detect the beginning and end of the package, control the transport unit (driven rollers or belts) and trigger the strapping process. More items - new and used - can be found in our shop! International shipping costs on request!

GUK FA 21/4 S2 SVA/730 stand-alone leaflet folding machine, 4 folding pockets, sheet format unfolded: min. 60 x 90 mm, max. 215 x 320 mm, smallest folding 15 mm, recommended paper weight 50-70 g/m², automatic drum suction feeder SVA/730, PCE barcode reader, double sheet control, output up to 460 folds/min., infinitely variable drive, electrical connection 400V/3Ph/50Hz, rated power consumption 1.76 kW, machine footprint approx. 1650 x 1075 mm (LxW), machine height approx. 1470 mm, machine net weight approx. 300 kg, machine in mobile version on wheels

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 171 kg,

Automatic knife sharpener: - Magnetic plate: 1600 mm long x 185 mm wide - Engine: 4 hp (3 kw)

Inv. Num. : 8647 Type: BS12 (AE) - III Producer: TSUGAMI Generated: Parameters: Control system: TSUGAMI MORU MSC 501 Side length: 170 mm Max. turning diameter: 3-12 mm Maximum spindle speed: 12000 1/min Spindle bore: 7 mm Weight: 2200 kg Equipment: Bar Feeder TSUGAMI

Inv. Num. : 8648 Type: BS12 (AE) - III Producer: TSUGAMI Generated: Parameters: Side length: 170 mm Max. turning diameter: 3-12 mm Maximum spindle speed: 12000 1/min Spindle bore: 7 mm Weight: 2200 kg Equipment: Bar Feeder TSUGAMI

The machine is from the year of construction 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round – 75 mm Rectangle – 60 mm Saw blade dimensions approx. ø 285 x 2.0 (D) x 1.7 (t) mm T = Waste; t = strength ; Hole 32; 4x11 at 63 mm Blade speed inverter monitors 30- 150 rpm Blade motor 7.5 kW Hydraulic system 1.5 kW Coolant system Oil mist lubrication Blade feed system servo motor and ball screw Material support 1,200 x 5,200 mm Bar feed: servo motor and ball screw Automatic index single stroke 6 – 600 mm Multiple stroke up to 3,000 mm Automatic Chip Conveyor Chain Conveyor Machine weight, incl. table 2,800 kg Length tolerance +/- 0.1 mm Cutting accuracy +/- 0.1 mm Remnant Standard 75 mm Loading capacity 13 x ø 75 mm rods Max loading width. 1,000 mm Accessories: Chip conveyor, air purification, loading magazine (still under power  ...

Key data: 280 mm

Specifications: Maximum diameter 280 mm Maximum dimensions rectangle 300×280 mm Maximum dimensions bundle 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre roller table, a chip conveyor, a variable clamping force control, a double-retractable index chuck, a work light and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Infinitely adjustable belt speed, controlled by an inverter Impeller motion detector with saw blade blocking and band break switch Shuttle automatic feed and sliding work table with castors Hydraulic Belt Tension Two-stage lifting clamping devices Split front screw clamp Double-retractable index screw clamp Working height se ...

Max. rod Ø 20 mm Max. machining length 165 mm Spindle speed 8,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear drilling tool: 8 Speed driven tools: 8,000 1/min

Max. rod Ø 20 mm Max. headstock stroke 205 mm Spindle speed 500 - 10,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 22 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3-8 Front side drilling tool: 4 Rear Reamer: 4 Speed driven tools: 8,000 1/min Bar Feeder FMB turbo 3-26

Control FANUC 18i-TB Max. rod Ø 32 mm Max. headstock stroke 310 mm Spindle speed 350 - 7,000 1/min Max. rod Ø sub-spindle 32 mm Max. speed sub-spindle 350 - 7,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear Reamer: 4 Back side machining: 4 Speed driven tools: 5,000 1/min Bar feeder FMB turbo 3-36

SPECIFICATIONS: Rotary table: Ø 1500 mm Wrapping with stretch film Working height: max. 2900 mm Electronic adjustment Installed power: 3 kW

Automatic washing line for IBC containers manufactured by Pohjaranta Oy. Manufacturer: Pohjaranta Oy Finland Type: IBC-PK1 Model year: 2013 Feed conveyor, line of 8 containers Junction station Control center, Siemens Various washing programs, heating of washing water, conductivity Automatic wash / manual program Condition: Slightly used, in very good condition Has been in a warm and in a dry production environment in working condition.

Key data: 400 mm

Saw blade diameter 400 mm Cutting diameter 130 mm Cutting area at 90 degrees: square 120 x 120 mm Cutting area at 90 degrees: flat 220 x 80 mm Feed length 600 mm Feed length multiple 1800 mm Cutting speed 10/13/15/20/26/30 m/min Miter cuts -/+ grade 60 Total power requirement 5.5 kW Machine weight approx. 2,600 kg - with mitre adjustment +/- 60 ° with digital display - Accessories: roller track, documentation, various circular saw blades

Key data: 670 mm

Cutting range 90° 670 x 670 Specifications Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: infinitely variable: 15–120 m/min Cutting speed: infinitely adjustable: 5–1200 mm/min Belt drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Index speed: 200 mm/s Minimum saw diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg

2 pieces Revolver automatic lathes, Fabr. Index, Type OR with many accessories Specification: Largest diameter 12 mm Number of spindles 6 Number of spindle speeds: 10 pieces Minimum spindle speed 950 1/min Maximum rotation speed of the spindle 7500 1/min Weight of the machine 1 t (for more data see nameplate)

1x INDEX ER25 (built in 1974) with milling device (IRCO bar feeder with weight feed) 3x INDEX 25 (model years 1973-76) 4x INDEX C29 (years 1970-81) 3x INDEX DG12 (years 1972-75) 1x INDEX DG20 (built in 1972/73)

Pallet feeder PFH-82 4 buckles BCUH-78 2 knives Batch counter Anti-noise hood SBP-66-VE delivery (year 2010) 6 folding rollers changed in 2025.

Pallet feeder 4 buckles BCUH-78 2 knives Side buckle Batch counter Anti-noise hood SBP-66+MKE+VE delivery (year 2007) Belt delivery Folding rollers changed in 2021, belts in 2024.

Length : 1430 mm Width : 620 mm Height : 1540 mm Shrink tunnel : (l)850 x (h)600 mm Kind of strap : polypropylène Strap width : 12 mm

BR-G17 18038 Testing Machine Manufacturer: Kirschenhofer Including Yaskawa ERAR-1000-06VX8-E10 robot Camera The Kirschenhofer testing machine type BR-G17 18038 is a specialized device that was developed for automated test processes in industry. It is particularly suitable for quality control of various products and components. Here are some of the key features and functions of this testing machine: Main features of the Kirschenhofer BR-G17 18038: Automation, versatile inspection methods, high speed, user-friendly user interface, robust design, data management.

Stock# UG6392 Automatic machine for lipstick filling. Manufacturer: Cosmatic (IT) Model: SM-2000 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2023.

Material feed in any length (max. stroke 400 mm) Cutting diameter: around 360 mm, square steel 90°: 360 x 360 mm Cutting speed infinitely adjustable: 17 - 110 m / min. Conveyor Instruction manuals and additional saw blades available Further technical data on request Machine weight: approx. 2,400 kg

CONTROLS   PLC TECHNICAL SPECIFICATION   max. cutting height: 360 mm   sawband length: 5334 mm   sawband width: 41 mm   max. bar feed (single stroke): 600 mm   cutting speed min.: 14 m/min   cutting speed max.: 102 m/min   power of band drive: 5.5 kW ELECTRICAL SPECIFICATIONS   total power consumption: 10 kW DIMENSIONS / WEIGHTS   space requirements -left/right-: 2840 mm   space requirements -front/back-: 2800 mm   total height: 2130 mm   total weight approx.: 2540 kg

Order- No.: 153-03 // Ser. No.: 1936 Equipment / Additional information: No. of ups: 3 Max. sheet size, width x length (cm) 1 up / 76 x 30,5 2 ups / 33.5 x 30,5 3 ups / 23.5 x 30,5 Min. sheet size, width x length (cm): 11 x 9.5 with small format equipment: 9 x 6.5 Max. pile height (mm): 150 Min. pile height (mm): 20 Max. speed (m/min): 200 Max. output (piles /h): 1,800 Banderol width (mm): 5 Pressing force (N): 35,000 Infeed height (cm): 40–105

suitable for autoclave diameter 1,100 mm,, can be used in stationary and rotary autoclaves,, made of galvanized steel,, External dimensions L / W / H: approx. 825 mm / 770 mm / 695 mm, Inner dimensions L / W / H: approx. 770 mm / 685 mm / 670 mm