129,270 used machines on RESALE, but how to find them? Machine Search
Max sheet size 1300 x 1100 mm min. Sheet size 350 x 350 mm Precision +-1.5 mm Speed 6,000 sheets / hour Power 12 kW Length 12,5 m Weight 6.8 t
maximum format 1060 x 800 mm min. size 350 x 350 mm Speed 80 m / min. Paper thickness 105-500 grams Energy 101 kw Weight 8500 kg Mass 8860 x 2380 x 3000 mm
Sell semiautomatic funnel Stuffer equipped with agitator. Voltage 230V. Funnel 45 liters with ClampanschluÃ? for product supply Filling volume of 15 ml 1000 ml. (depending on the filling Pistons) Option 1 - 15-250ml. Option 2 - 50 ml 1000ml. Filling quantities of 1 - 15 pieces the minute / dependent Visco and filling volume. The lifting table can option be purchased with as. You will find more machines and accessories below: ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35837&dealer=1& ;order=1& or ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35846&dealer=1& ;order=1& visit us also at: cbv-pack
Autoclave/Hardening boiler Manufacturer: Scholz & Co. Year of construction: 1996 Working pressure: 16 bar Working temperature: 203° C Volume: 101.800 liters Diameter: 2,000 m Length: 26 m Charging medium: saturated steam Quantity: 9 pieces (all identical) The autoclaves could be inspected at every time! In very good condition!
Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length width (standard execution) 3705 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod gu ...
used
Qty. 1 Second-hand automatic sheets (pallets) storage system Mfc.: MATTER S.R.L Built: 2002 Model: Mat 00.6 Number of Automatic Retrieval Cars: 2 Number of drawers: 756 Pallets Dimension of Pallets: Width: 1000/1500 mm / Length: 2000/4000 mm / Height: 250 mm Max. Pallet Weight: Max: 3000 kg Maximum speed of Retrieval Cars: Y Axis: 11 m/min . / X Axis: 58 m/min. / Z Axis: 20 m/min. System is working with Picking Station for separating and handling of pallets Dimensions of the system: Length: 74 meters x Width: 9.40 Meters (not including the picking station) X Height: 9.6 meters ( 9 rows )
Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm
Autoclave, Autoclav, Impregnation Chamber Overpressure Chamber Used Type: HP 2166-68 Volume approx. 6.8 m3 Length inside approx. 5 m Diameter inside approx. 1.5 m Large door on the end side approx. 1.5 m in diameter Max temperature: 140°C Pressure max 10 bar Dimensions outside approx.: 5600 x 1800 x 2500 mm 6 pieces in stock The autoclaves are used for sterilization of equipment, tools and materials. They can be used in the chemical industry, medicine and also in the processing industry for vulcanizing tires and rubber products or for printing impregnation. The system is completed according to your wishes by our own special machine construction. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting
Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration
8-spindle rotary machine Built in 1989; serie 25 Refurbished in 2012 • New electrics • New bearings • Guided tours • CNC cross slide in position 7 • Spindle stop setup • Material rod guide • Chip conveyor • Pick-up spindle position 8 • Calibration device • Various tool holders • Various curves
High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine
Double door autoclave De Lama model DLOV year of manufacturing 1998. Useful capacity 4990 liters. Supply voltage 380 V - 50 Hz Tri - phase. Installed power 6 kW. Maximum working pressure 2.5 bar. Maximum working temperature 138.2 C °. Installed cycles: A sterilization + drying B for vials C For closed containers I test cold vacuum machine J sterilization air filter in situ
Neri BL400 VTE tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons and 1 vignette/bollini label or similar on the upper face of the carton. Specifcation: - Labelling machine balcony construction stainless steel executed. - Electrical cabinet on machine board, Siemens S7-300 PLC controller with HMI touch screen - Laetus Argus 6012 bar code reader - Easy access from behind to electrical and mechanical parts - Positive transport of cartons with toothed belts. - Upper conveyor belt to keep carton stable during tamper evident seals application - Twin horizontal conveyor belt for products bunching at in-feed. - Mechanical timing device to dispense cartons on the main toothed conveyor belts. - Label dispensing with stepping motor drive. - Automatic work speed synchronization of motors. - Label length self-le ...
Store number: 3418 BANDS�GEAUTOMAT Manufacturer: IMET, Type: X-TECH 410 Machinen NR.: 033476001, Built: 2003 Specifications: Size sawing capacity dia. 410 mm Total output 5.5 kW Hydraulic. CNC control. Saw male 6150 x 41 x 1.3 Length: 2000 mm, Høhe: 2200 mm, Width: 3500 mm, Weight: 3450 kg
Graham labeler COUV 128-40 with tripod, Y.O.M. 2001
Automatic filling plant Logdos Späth GmbH Type K-DOS. F/AL 40/ EX EX protected mobile on wheels Programable X/Y axis and pallet image Very good condition, directly from production!
WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape
KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.
used
Bertolaso Athena 75/15 Vacuum filler Bertolaso Year: 1991 with 75 filling valves and 15head aluinium screw capper Running direction: left to right
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...
Libra / labeler Bizerba GV 7000, built 1999, in a very good used and functional condition. Fully automatic scale with labeler / price printer, programable, feed and feed belt. Dimensions W/D/H 260/65/170 cm. Operating voltage 230 volts, compressed air connection 6 bar required. Workshop-tested, ready for immediate use. More on request.
Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide
Thread cutting gear Pick-up device partially revised
M. No.: 20051619 Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease
Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide
Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer
Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle
GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...
Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...
Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide
Available for sale 2 x NEVER USED Leroy Somer Automatic Voltage Regulator R713. The 3F R713 or R723 modules are used in connection with a R200 series regulator for equalizing the voltage of an alternator with that of the network before coupling, when the installation operates automatically or when manual equalization of these voltages is not possible. This prevents excessive current caused by coupling a network to the machine when both are not at the same voltage. This difference in voltage is usually due to fluctuations in the network voltage because the alternator is regulated at a constant voltage except for cases of voltage droop). On some networks these fluctuations can reach ± 10%. Equipment never used and in good working conditions. Consumption: < 2VA Response time: < 300 ms Dissipated power: < 1W Temperature Shift: 1% of Un for delta T ambient variing from -20° to 2 ...
Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine no.: 7.0176 Year of construction: 1987 Weight: 11t General / technical data: Portal-6spindle automatic lathe with measuring device and automatic feeding Spindle dividing circuit: 300mm Number of longitudinal slides: 6 Number of cross slides: 2 gr. cross slide stroke: 60mm gr. longitudinal slide stroke: 125mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Stepless 1.95 – 78 sec. Low time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20kW; Feed rates 8kW Installation area: approx. 1720 x 4700mm Remark: The machine cannot be converted for bar work. Equipment: – 1 creep gear drive for set-up operation – 1 automatic central lubrication device – 1 coolant device with lines and pu ...
Schuette SG 18-6 with gantry loader as feed lathe alternatively conversion possible as a rod lathe, incl. spindle stop setup Location 3+4 with extended stroke CNC cross slide on layer 5 Etc. Machine is ready for use and can be visited under electricity loading device is not currently connected.
We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.
Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...
Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past
Index HE 25 with rod feed hydraulically controlled with long turning device
Inv. Num. : 6521 Type: Compact A35 Producer: Kovosvit Generated: 2005 Parameters: bar diameter: 35 mm Maximum main spindle power: 7.5 kW Maximum spindle speed: 7000 1/min Number of CNC controlled axes: 8pcs Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3450 kg Equipment: Bar feeder (3 meters) LNS Sprint 555 Part of the sale: Collets Auxiliary head Polished holders VDI25/ER32 Axis tool holder VDI25 Straight and angled power tool holders Equipping the machine with tools (square 16x16 mm) The feeder is equipped with guide channels, pushers and reducing bushes
CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg
Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...
various accessories / spare parts for Tornos AS 14
Machine Details Stock-No. 1105-03889 Type of machine CNC Lathe Make FEMCO-ASTRHAL Type 20-60 Year of manufacture 1989 Type of control CNC Storage location HAGUENAU Country of origin taiwan Delivery time IMMIDIATELY Freight basis ex stock Price Technical details turning diameter 540 mm turning length 600 mm control Fanuc 10 T turning diameter over bed 540 mm turning diameter over slide 255 mm rapid traverse 15 (X/Z) m/min power capacity 11-15 kW Tool Numbers 12 chip conveyor 1 kW Additional information CNC-lathe clamping tool, main spindle, power chuck TAILSTOCK CHIP TANK cnc control fanuc 15 T 42 DIAMETER HOLE TTHE SPINDLE 11/15 KW 3500 RPM
MAX DIAMETER OF ROD: 100 MM MAX CUTTING DIAMETER: 552 MM MAX TURNING LENGTH: 1.195 MM TURRET: 16 ROTATION SPEED: 2800 RPM CONTROL: FANUC 32 B INCLUDES: AUTOBLOK STEADY SLU-3.1 – ZS CAPACITY: 20-165 MM AUTOMATIC FEEDER FOR BARS BREUNING – MOD. MUK 10016-II
maximum number of results exceeded
please refine your search
