auto packing used for sale

Vertical machining center VF 4 SS Manufacturer: Haas Automation Year: 2019 Control Haas Clamping table surface ... 1321x457mm Axis X ... 1270mm Axis Y ... 508mm Axis Z ... 635mm Spindle speed ... 1-12000/min. controlled axes ... 3 cooling... 20bar ISO 40. Magazine places... 30+1 Machine weight ... 6000kg L x W x H ... 3886x2400x3175mm Max. table load ... 1588kg The machine is in good condition, possible to test under electricity.

• Sorting insert diam. 650 mm made of stainless steel • Frequency control unit • Adjusted for cap diam. 28 x h 12 mm • Plastic housing • Height adjustable • Electr. connection 230V/50Hz

Semi-automatic machine 220 V Electric box with disconnecting switch Reset system for screwing head Bottles from 30 to 365mm height Bottle holder tray (manual height adjustment) Current tooling : 1 screwing head covered with rubber with 3 brackets. Head foot for ? 31. Possibility to change head for other format / use or crimping, capping, ...

Universal Automatic tablet testing system - Measuring equipment for laboratories - Tool for tablets Allows to test : Hardness Diameter Thickness Weight Accuracy Scale Sartorius WZ64S Range: 10 to 50 g Unit: mg / 0.5 mg / 0.1 mg adjustable Thickness Drive: stepper motor. Measuring principle: Linear potentiometer. Unit of Measure: mm or inch. Tolerance; +/- to.1 mm Hardness Drive: stepper motor. Measurement: Load measuring cell (lmz) Measuring principle: Torque gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of Measure: mm or inch. Range: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0,1 mm Voltage: 100 / 240 V, 50Hz / 60 Hz The UTS is a universal and fully automated test system developed for use in industry. This tool is the approved model of a series of test systems that have been tested for man ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: SMW Autoblok, top jaws for power chucks 2 sets -Type: 012494 WAK 400-10, see photos -Hole spacing: 54 mm -Width: 34 mm -Price/sale: only complete -Dimensions: 170/190/H80 mm -Weight: 7.9 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

sheet width - max.: 0500 mm coil weight: 2,00 t coil internal dia.: 350 - 550 mm coil outside - diam. ca.: 1400 mm expansion: hydraulisch total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Hydraulic spreading - 6 pieces of clip-on arms for lateral band limitation - Frequency-controlled drive - Loop control via ultrasonic transmitter - Free-standing control cabinet - Pneumatic pressure roller from above, can be moved laterally - Engine brake - Swivel hand control panel - Reel can be moved hydraulically - Loading chair can be swiveled 90° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0600 mm coil outside dia.: 1500 mm weight max. in kg: 4000 kg width of sheet max. ca.: 3,60 mm sheet thickness - min.: 0,80 mm diam. of the rolls ca.: 80 mm nomb. of straightening rolls: 7 feed rolls: 2 speed: 5-30 m/min range of expansion ca.: 475-535 mm expansion: hydraulisch pinch roll: hydraulisch total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler type MS 4000 - Hydraulic spreading - Hydraulic pressure roller from above - Swivel-in limit roller at the front, contact disc at the rear - Auxiliary drive - Reel movable - Coil lifting table Straightening machine type MR 58 Rollers hardened and ground. - Pneumatically ventilated feed roller - Straightening rollers adjustable as a block - Lateral belt guidance at the inlet - Hydraulic band insertion aid - Straightening head can be opened - Large roll basket and transfer table at t ...

Automatic machine for the production of bags with the use of a sealing matrix, used by us for the production of ice cube bags. The machine is equipped with a welding and cutting knife, foil feed length adjustment, foil forming device (self-closing pouches), a conveyor belt collecting pouches and a movable table with a pouches counter. The machines have additional equipment in the form of a die for the so-called eurozawieszki and additionally 5 different matrices (with different patterns of bags). The machine is powered by a three-phase voltage of 380V. A pneumatic system is also used for its work. It was produced in 2014, and has not been used since 2020 (beginning of the pandemic).

1) Powder Mixing Plant Consisting Of: -n°2 Powder Dispensers+clochee For Dust Extraction; -n°1 Horizontal Mixer For Dosing Powders, Complete With Extraction Vents And Dust Filters; -n°2 Horizontal Mixer Accumulation Dust Materials Mixed, Complete With Extraction Vents And Dust Filters; - Support frame plus ladder. -almost new, used for a few hours. 2) Bl Packaging Machine For Plastic Bags 5/30 Kg: - Packaging Machine With Horizontal And Vertical Sealing Bars; - Complete With Electrical Panel And Support Frame. 3) Vertical Bucket Elevator: - Bevini brand; -mod. et4; - Measures 1.15m x 0.55m; - Height 6.70 m; - Almost new, used for a few hours.

cutting diameter: - mm saw band length: - mm cutting width: - mm Control: Kasto total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used case packer / tray packer for open trays. Originally, 1 litre tetra packs were cartoned. Manufacturer: M.A.S. Automation AS Year of construction: 06/2006 Cardboard is pre-folded from flat blanks, filled and then folded around the product. Gluing by means of hot melt glue. Infinitely variable adjustment units Product infeed conveyor incomplete. max. 100 products/min Control cabinet: Rittal, V2A Pneumat. Festo Gluer Nordson Geared motors SEW Frame stainless steel Mech .+ electr. Standard parts: Branded 2 emergency stop switches, safety light barriers The facility can be visited in Bremen.

-Manufacturer: Blue Print Automation -Type: MGC -Year of construction: 2006 -Power Input: 8kVa -Frequency: 50 Hz -230 / 400 Volt

Power chuck øOuter 800mm • Centrifugal force compensation for high spindle speeds • Proofline® chuck = fully sealed – low maintenance STANDARD EQUIPMENT • Chuck: 1 set of soft attachment jaws, see picture • 1 compensating stroke regulating wrench • Low maintenance 6-jaw power chuck with 2+2+2 tension. The high-precision machining of thin-walled components. The 2+2+2 compensation mechanism of the chuck Enables the clamping of thin-walled components Clamping force to 6 points, reduces radial deformation. - Centrifugal force compensation for high speeds; -Low maintenance and other benefits The mounting flange is A2-KK15

B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features:

dual-function machine for polishing and grinding - SIEMENS PLC controlled machine with touch display. - ability to create and save your own programs - 9 heads - Rotatable display - high performance, ease of use - POLISHING function - GRINDING function - DTR documentation

Year 2011. (Not exploited) Types of packaging: • Flexible packaging • Semi-rigid packaging • Tight packaging Medium to high performance. • Ability to use various materials, such as flexible film, PS, PETS, PVC, HIPS, etc. • Maximum cycle speed of 18 cycles per minute for soft blister packaging and 10 cycles per minute for rigid blister packaging • Web width 400 mm • Cut length up to 320 mm • Depth molding 80 mm • Servo chain • Stainless steel construction.

Complete Automatic Line Packaging Trays. Composed by: - Interlocking Cardboard Tray Former Model Vara Year of Construction 1992 - Belt conveyor elevator for multi-head weigher - A304 stainless steel vibrating screen - Linear Multihead Weigher 10 Heads Opem Inox A304 Year of Construction 1992 With Base - A304 Stainless Steel Flow Pack Packaging Line Conveyor Belts - Technopack Flow Pack packaging machine Year of construction 2001 Max Speed 60 Pcs / min. 10.4 Double Coil Automatic Exchange Touch Screen Panel.

PA 182 rotary tray sealing machine Serial No: 1744182F15074 Cycles 50 Power: 240V

sheet width - max.: 0350 mm coil weight: 1,00 t coil internal dia.: 5570 - 750 mm coil outside - diam. ca.: 1200 mm Pay-off Speed: 30 m/min expansion: hydraulisch Drive: regelbar total power requirement: kW weight of the machine ca.: 0,650 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Consisting of 4 parts Approx. Onsite Dimension. (l x w x h): 300 x 210 x 140 mm, weight approx.: 20 kg

Vibratory feeder, vibratory feeder, vibratory feeder, feeder, automatic feeder hopper, spiral feeder -Handover: in current condition as seen -Condition/add-on parts: see photos -Manufacturer: Oku automatic, spiral conveyor vibration feeder with frequency control -Type: VZ 1000 SR -Frequency converter: Müller Kurtz MFS 168 -Work basin: Ø 670 mm -Outlet width: 300 mm -Work basin height: 245 mm -Shelve conveyor: elastically mounted -Connection: 230 volts -Transport dimensions: 1070/810/H730 mm -Total weight: 293 kg

Description: 9700 W 5.4 bar Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 650 mm, weight approx.: 30 kg

Key data: 1016 mm, 508 mm, 635 mm

Travel X-axis 1016 mm Y-axis 508 mm Z-axis 635 mm Clamping table Table clamping surface 1220x457 mm Number of T-slots 5 Max. table load 1580 kg Milling spindle Spindle speed 10000 rpm Spindle holder ISO 40 Spindle drive 11 kW Feed Feed X-Y-Z axis 0-7620 mm/min Rapid traverse X-Y-Z axis 18 m/min Tool changer Number of tools 24, Side-mounted tool changer Control Haas Automation, electric handwheel 4.Axis machine prepared for a 4.axis Coolant coolant system 200 lt. with chip conveyor Internal cooling by the spindle Remark Oil mist extraction and 2 foot switches for pneumatic actuation of mechanical vices not included

Key data: 762 mm, 406 mm, 508 mm

Travel X-axis 762 mm Y-axis 406 mm Z-axis 508 mm Workbench Clamping surface 356x914 mm Number of T-slots 3 Max. table load 1360 kg Milling spindle Spindle speed 7500 rpm, gearbox Spindle holder ISO 40 Spindle drive 7.5 kW Feed Feed X-Y-Z axis, max 16.5 m/min Rapid traverse X-Y-Z axis 25.4 m/min Tool changer 20 tools Haas Automation Control, Electronic Handwheel 4.Axis machine is prepared, axle card and wiring Coolant coolant system 200 lt. with chip conveyor Programmable coolant nozzle Accessories Table Probe System Note: The clamping and machining tools shown in the illustrations are not included in the scope of delivery

Frontcutting of Perfect Bound and Thread Sewn Soft Cover Books with Folded-In-Flaps, Size: Max. 520x350x60mm, Min. 100x100x3mm, Speed: Max. 5,500 Cycles/Minute

Description: amount 5 sets weight approx.: 30 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm

Description: amount 7 sets weight approx.: 45 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm

control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 508 mm, 406 mm, 508 mm

Tech.Data-Tech. Data X/Y/Z-AXIS-X/Y/Z-axis mm 508x406x508 4th/5th axis-4th/5th. Axis Rundtisch mit Reitstock – Round table with Tailstock Clamping table size mm 660x356 Milling head BT 40, 7500 rpm CNC Control-CNC Control Haas Automation WZ changer tool changer 20 If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be happy to send you a detailed offer

Key data: 762 mm, 406 mm, 508 mm

Technische Daten Technical Data X/Y/Z axis - X/Y/Z axis mm 762/406/508 4th/5th axis - 4th/5th. Axis Maschine ist / Machine prepared Clamping Table - Table Size mm 356x914 Milling Head SK 40, 7500 rpm CNC-Steuerung - CNC Control Haas Automation WZ-Changer – Tool changer 20 If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be pleased to send you a detailed offer

Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !

BCS Autobox 2600 + Multicut 3, Year 2017,, Max.Sheet width: 2600 mm, Auto set slotting tools, Auto set Creasing tools, Autoset. Tool less size change, Feeder with capacity 300 mm height of blanks, Typical set-time of 1 minute, High speed up to 100m/min, Over 50 Fefco box styles possible, Bmjpclzewxl, Handles singe to double wall corrugated board (max. 10 mm), Touch Screen Control panel for easy programming of new or stored box size and styles

Autoetik S.L. labelling machine, model: AE31, number: 14-10, year of construction: 2010, 380 V, 50/60 Hz, wire belt, belt width: 350 mm, clearance: 350 mm x 100 mm, infeed clearance: 480 mm x 310 mm, total dimensions: 2300 mm x 900 mm x 1950 mm.

Packaging Automations Ltd mobile traysealer, model: Eclipse SL4, serial number: EC3/4-MC-00055, year of construction: 2015, 415 V, 50 Hz, plastic belt, belt width: 290 mm, dye: (4x) 230 mm x 160 mm, total dimensions: 3150 mm x 900 mm x 2000 mm.

Description: Max. Coil weight: 114 kg Max. Coil outer diameter: 762 mm Max. Material width: 152 mm Center diameter: 229-508 mm Maximum speed: 80 rpm weight approx.: 318 kg, Approx. Onsite Dimension. (l x w x h): 1,350 x 850 x 1,600 mm

There is a truck tyre cold retreading line available, plant includes (1) Rail System Helm, length: 250m, with uprights and switches (2) Shearography Marangoni ITT 3000 SFERA, weight: 4t (3) 2x Pressure Control Collmann, year of construction: 1980 (4) Broaching Machine Collmann, year of construction: 1998 (5) Broaching Machine Marangoni (6) Carcass control (7) Repair station (8) AZ Extruder Tool Temp (9) Cutting table (10) Envelope Spreader (11) Autoclave Scholz, capacity: 47. 000l, length: 18.000mm, with automatic change system, year of construction: 1998 (12) Pressure Vessel Alup (13) Pressure Vessel Otto Boge, year of construction: 1970 (14) Compressor Alup SOLO 15, year of construction: 2005 (15) Compressor Kaeser CS 76, year of construction: 1999 (16) Compressor Kaeser CS 76, year of construction: 1999.

This system consists of filling machine, screwing machine and the transfer from one to the other. Includes two HIBAR Pump 4S3-R2 high-precision dosing pumps and one as a spare part. Formats: 8ml-1000ml. A list of all formats on request. Documentation available. Glass container with pipette: volume: 8ml/28ml/30ml, base dimensions: 28mm/34mm x 34mm/35mm, height: 65mm/67mm/67mm, filling opening: 10mm/10mm/20mm. PET container with pipette: volume: 30ml/50ml/60ml, base dimensions: 32mm/37mm/38mm, height: 68mm/72mm/88mm, filling opening: 10mm/10mm/21mm. PE container with splash: volume: 250ml/1000ml, base dimensions: 56mm x 42mm/85mm x 69mm, height: 140mm/210mm, filling opening: 18mm/19mm. Documentation available.

Max. printing area: 400x400mm, frame dimensions: 450x450-736x736mm, axis range: +/-5mm, connected load: 600W, length: 1540mm, width: 872mm, height: 1380mm, weight: 450kg, suitable for series production with small and medium quantities, quick changeover between individual jobs, suitable for double-sided PCBs, magnetic table with vacuum block, fast printing accuracy and high repeat accuracy, has been regularly serviced, on-site inspection is possible.

Merz KT160 semi-automatic packing line for packing sticks into pre-folded cartons , 2 lanes (previously the Merz was fed by two 1-lane stickpack machines), inserting of the sticks using 2 Stäubli robots (1 robot per lane), suitable for sticks with a width of 15 to 25 mm and a length of 60 to 100 mm, maximum possible carton size (pre-folded) 115 x 125 mm (WxL), count of 35 to 100 sticks per carton possible, capacity up to 63 sticks per minute, electrics 400V/50Hz/3.5kW, compressed air 6 bar, Siemens SIMATIC Touch Panel

Packing table, shipping table, packing table ROCHOLZ Table length: 2000 mm Table depth: 800 mm Working height: 860 mm Table top: 20 mm Load capacity: 100 kg - Frame profile made of square tube - Shelf 1430 x 200 mm- Cutting device for foil and paper, cutting width 1250 mm- Upper shelf with 7 compartments (width = 180 mm, height = 300 mm), division over 8 mm removable plug-in bracket- Scope of delivery as shown Overall height without upper plug-in brackets: 1900 mm Overall dimensions L x W x H: 2000 x 920 x 2200 mm Weight approx. 70 kg good condition; used

Price in euros without VAT: 5500

With documentation, the machine was only in operation for a few hours, has adjustable shoulders and matching format parts, an on-site inspection is possible.

Transport width: 4800mm, format: 0.25/0.5/0.7/1l, output: 38,000 bottles/h, with documentation and accessories.

Automatic Packaging Machine, Seamer SIAT / BRÜNINGHAUS Type SM8.1 Carton Gluing Machine, Carton Gluer, Semi-Automatic Sealing Machine Fabr. No. 15905 Year of construction 1999 Carton length 160 mm -any Carton height 150-500 mm Carton width 130-520 mm Mains connection 400 volts, 50 Hz, 200 watts - Manual crank adjustment of the lateral conveyor belts for the carton width - Carton feed via conveyor belts on the right and left - manual crank height adjustment of the upper gluing station - Glues the bottom of the box and the top of the box with 2 separate parcel tape stations- 2 gluing units for the processing of self-adhesive tape, width 75 mm- Gluing stations for self-adhesive tape (also for large rolls 300 mm) Space requirement L x W x H 950 x 700 x 1200 mm Weight 120 kg good condition; used

Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm

Minidose packing machine Made in Spain for small dose of sauces, olive oil, powder, hot caramel. The machine is new one and can be prepared for any kind of liquid, powder, granulate. PLC and screen. Electric photocell. coding machine. Further information please contact

Used 3-station turbine packing machine. Dose range 5-50 kg, has a pickup conveyor and a bag-forming conveyor. YOM 90's.

Used line for packing powdered products Chronos. Powdered products are packed in four-layer paper bags with a polyethylene insert of 25 kg net or BIG-BAG containers with a capacity of max 1000 kg. Packing in 25 kg bags takes place on an automatic Chronos packing machine. The packing machine automatically weighs, seals the polyethylene bag and seals the paper bag.