127,856 used machines on RESALE, but how to find them? Machine Search
USED SETRIMEGA 3.5 CELESTER AUTOCLAVE REF.: C5978 General characteristics: Manufactured by CELESTER Model STERIMEGA 3.5 Voltage 220-380 (50 Hz) Power 5 kW Design pressure 2.75 bar Test pressure 4.4 bar
Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape
USED FMC FOODTECH A144 AUTOCLAVE REF#: C6849 Sterilizer A144 manufactured by FMC FOODTECH General characteristics: Maker FMC FOODTECH Model A144 Year of manufacture 2006 Weight 2240 kg Maximum working pressure 4 bar Test pressure 5.72 bar Pressure safety valve 4 bar Maximum working temperature 205 ºC Steam conditions min. 6 bar / max. 7.5 bar Air conditions min. 5.5 bar / max. 6.5 bar Cooling water conditions min. 3 bar / max. 5 bar Capacity 6820 L Engine features: Tension 380 V Power 10 kW Frequency 50 Hz - 3P
Hot air sterilization for dry heat sterilization and depyrogenation. Autoclave with single-leaf door on both sides. Operating temperature: 160/250°. Chamber size: 1000 x 1450 x 1450 mm (depth).
Manufacturer GEMINI Model GHT4-720 x 2,000 Year 2002 FAGOR 8055 CNC Capabilities Max. Ø turning on bed / carriage 720/470 mm. Height of points on flat guide 366 mm. Distance between points 2,000 mm. Fast Forward X/Z Axes 8 m/min Head Nose Head DIN-55027-11 Main shaft hole diameter 104 mm. Head Revolutions 0-1600 No. of Automatic Head Ranges 2 Main Motor Power 17/ 20.5 kW. Maximum torque 1590/1920 Nm Counterpoint Tailstock shank diameter 100 mm Tailstock shaft course 200 mm Morse 6 Tailstock Rod Housing Equipment 4 Post-Automatic Turret. Full Rear Protection INCLUDED Universal 3 Claws Plate INCLUDED Fixed bezel Cap. 50/220 INCLUDED Maximum permissible weights Max. piece weight between points 2,560 kg With 1 bezel / With 2 bezels 3,200/4,000 kg Rim-in with center of gravity at 250 mm. 800 kg Others Total power 28 kW Machine weight 4,900 kg. Machine Di ...
Steam air sterilizer for the counterpressure sterilization of aqueous solutions in sealed containers. Pass-through autoclave with semi-automatic doors on two fronts. Hydraulic system made entirely of stainless steel. Capacity: 1470 litres. Operating temperature: 138.9°. Chamber size: 800 x 800 x 1250 mm (depth).
Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device
CNC automatic lathe Traub TNL 32-7 • Version TNL32/TNL32K alternating mode • Control TX8i-s • Main spindle passage 32 mm, with C-axis • Counter spindle incl. partial hollow stress • Revolver top X/Y/Z/H axis: 10 shots dual drive • Revolver bottom X/Y/Z/H axis: 9 shots total drive; Counter spindle sep. Drive • RAPP 8-fold; Total drive 3 tools IK • Workpiece deflection unit with linear gripper • Coolant supply 3 bar • Coolant supply 8 bar • Hinge belt chip conveyor, discharge height 1000mm • Glass scale X-axis turret top/bottom • Compact belt filter for cooling lubricant: filter fineness approx. 30-40 μm • Bar loading magazine FMB LSK 38, for rods 3.2 m (original price at that time 340.000,- €uro)
Make MBO. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter
Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...
AUTOCLAVE (USED FOR ALL TYPE OF YARNS) , FULLY AUTOMATIC VACUUM - STEAMER WITH AUTOMATIC TRANSPORT SYSTEM ‘P’ MAKE : WELKER ( GERMANY) Y.O.C. : 1987, Reconditioned 2002, later used for couple of more years, then preserved ! VOLUME : 9200 L MAX. TEMPERATURE : 150˚C WORKING LENGTH : 4000 MM DIA ( WITHOUT INSULATION) : 1600 MM DIA WITH INSULATION : 1720 MM
High-quality PLC – controlled automatic 90° under-table – straight-cut circular saw machine, for the rational cutting of profiles made of aluminium – non-ferrous metals – plastics – wood and other soft materials Smallest possible section length 5 mm Largest stroke of the feed clamping stick 620 mm (feed length unlimited) Infinitely adjustable feed speed Feed accuracy +/- 0.2 mm Horizontal and vertical material tension Largest saw blade diameter 450 mm Cutting area - - 300 mm x H 50 mm - 260 mm x H 98 mm - 240 mm x H 100 mm (see the figure with the section diagram) Saw blade speed 2,800 rpm Saw blade drive power 2.2 kW Dimensions approx. 1.5 x 0.9 m x H 1.36 m Weight approx. 440 kg
- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg
Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Flowcon, Automatic Balance Valve, unused in original packaging -Type: F380.0.EBI F360111 -Price: per piece -Number: 2 piece -Dimension box: 185/100/H45 mm -Weight: 0.6 kg/piece
dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...
CNC SPINNING LATHE MANUFACTURER: M+M MODEL: HF450TT/2S SERIAL NUMBER: 26-2453-00 YEAR: 2000 CONTROL MANUFACTURER AND MODEL: Tracktronic Z-AXIS CENTER HEIGHT: 419mm DISTANCE BETWEEN CENTERS: 1200mm Z -AXIS TOOLING ADAPTER: DIN 55027/ Size 15 Z-AXIS DRIVE POWER: 80kW Z -AXIS DRIVE ZF REDUCTION RATE: 1:4 Z-AXIS DRIVE SPEED: 0-1000 RPM step less variable X - SLIDE TRAVEL: 500mm X - SLIDE FORCE: 100kN X - SLIDE VELOCITY: 400mm/min Y - SLIDE TRAVEL: 275mm Y - SLIDE FORCE: 100kN Y - SLIDE VELOCITY: 400mm/min TAILSTOCK TRAVEL: 600mm TAILSTOCK CLAMPING FORCE: 80kN EJECTOR TRAVEL: 450mm COOLANT: yes POWER 3PHASE / 50-60 Hz / 200 - 500 Volts: 3PH/60Hz/480V existing SPECIAL FEATURES OR ADDITIONAL ITEMS: POWER RATING 204 HP (152 Kw), CONTROL VOLTAGE 110VOLT / 24 VOLT DC MACHINE WEIGHT: 22000 kg CONDITION: EXCELLENT - VERY LIMITED USE
Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood
REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm
High-frequency ignition device, heating, gas and oil burners, control box, combustion control, burner control -Manufacturer: Landis & Gyr, firing control -Type: LOK16.250A27 -Dimensions: 105/105/H125 mm -Weight: 1.2 kg
Strapping machine, packaging machine -Through hole: 500 x 500 mm -Strapping band: 5 mm -Core diameter: 60 mm -Coil width: 120 mm -Pressing the pedal triggers the automatic strapping.
used
Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg
WENZHOU HT-GF500B automatic disposable gloves making machine built in China in 2020, is intended for the production of foil gloves used for example, in grocery stores or in production. A solid machine body made of high-quality steel ensures high stability of the structure even at maximum production speed. The machine for making plastic gloves produces up to 220 pieces of disposable gloves in one minute, with a maximum length of 400 mm and a maximum width of 300 mm. The manufactured foil gloves have two layers of foil with a thickness of 0.008 mm to 0.02 mm, thanks to which they effectively protect hands against bacteria and viruses. The total weight of the machine is approximately 1600 kg. There are six such machines on sale, all built in 2020. Characteristics of the WENZHOU HT-GF500B automatic disposable gloves making machine - number of produced gloves: 180-220 pcs/min - num ...
Description Domino M230i T4 The ability to use stroke lengths of 0 – 360 mm and the auto-stop function to interrupt movement when touching an obstacle make the M230i-T4 label dispenser the most versatile and safe labeling system available on the market today. It is immediately available and ready for use Viewing possible at any time If it does not fit, there is always a large number of different labelers in stock. Talk to us and we will find the right one for you.
Auction-ID: A7-45419-56
Auction-ID: A7-45419-15
Auction-ID: A7-45419-14
Anko BFK-10 Automatic stir fryer Capacity 60l, gas LPG, with a scraper and stirrer to scrape liquid eggs and stir fry ingredients, automatic temp control, variable speed, automatic tip discharge, suitable for cooking fried rice, fried noodle, dried meat cracker, dried meat floss, jerky, fried ground meat, ham, dried squid, steak, coffee, peanut, powder, bean, sugar coating, tea leaf, sesame, tofu, sticky rice and more, 3Ph
REF-2263 SOMME 323 CAN SEAMER WITH 5 HEADS AND VACUUM FILLING SYSTEM 20 VALVES Automatic tin can seaming machine with 5 seaming heads. Fitted with a 20-valve vacuum filling unit. Manufacturer: SOMME Model: 323 Can size: Ø 73mm (easy-open lids) Overall dimensions: length 3,400mm, width 2,800mm, height 2,200mm
- Total installed power 29.60 KW. - Part width from 205 mm to 3200 mm. - Piece length from 100 mm to 1200 mm. - Part thickness from 10 mm to 70 mm. - Belt feed, feed speed 52 m/min. - 2 loading arms with belt feed of approx. 670 mm length. - 2 unloading arms with belt feed of approx. 315mm length. - Distance between drill bits: 32 mm. - Drill bit rotation speed 4000 rpm. - 1 x horizontal drilling group working from the right side with 20 drill bits. - 1 x horizontal drilling group working from the left side with 20 drill bits. - 2.20 KW-2700 rpm motor in each horizontal group. - 5 x vertical drilling groups working from below, 2 rotating heads 0°-90° in each group, 10 drill bits each head, 1.32 KW-2700 rpm motor in each head. - 2 x vertical drilling groups working from above, 2 heads each group, 10 drill bits each head, 1.32 KW-2700 rpm motor on each head. - Minimum drill ...
Wolf head line and automatic mincing belt Delivery, samples and training - included in the price Price in euros without VAT: 3000
very stable automatic with protective lock and max. 275 saw blade
Output voltage 32V 20A, Auction-ID: A1-45526-10
Key data: 530 mm
Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual
Construction: Entirely constructed of stainless steel Press is used for tenderizing red and white meats without weight loss. All juices are retained inside the meat even after processing. The machine is fast and efficient, with a productivity of 500 steaks per hour. The thickness of the processed meat can be infinitely adjusted in the range from 1 to 30 mm. Technical data: Motor 1.5 kW Height 850 mm Width 440 mM Length 800 mm
The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.
SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...
saw blade diameter: 275 mm cutting diameter: 90 mm capacity 45 degrees: flat: 150 x 100 mm mitter cutting - all-position: 45 ° cutting speed: 16/32 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
10 € 
