auto packing used for sale

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 300 mm : 300 x 300 mm Capacity 90° rectangular: 320 x 300 mm speeds steplessly adjustable: 20 - 100 m/min work height max.: 640 mm total power requirement: 2,9 kW weight of the machine ca.: 765 kg dimensions of the machine ca.: 1,9 x 0,85 x 1,3 m after the sawing cycle has finished. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 350 mm Capacity 90° rectangular: 350 x 320 mm : 320 mm : 260 mm : 180 mm : 250 x 180 mm : 160 mm : 150 x 150 mm speeds steplessly adjustable: 20 - 100 m/min : 180 x 180 mm work height max.: 740 mm Control: total power requirement: 3,42 kW weight of the machine ca.: 2,31 t dimensions of the machine ca.: 2100 x 2100 x 1810 m On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 380 mm saw band length: 4800 x 34 x 1,1 mm cutting width: 430 mm : 380 mm Capacity 90° rectangular: 430 x 380 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 4,2 kW weight of the machine ca.: 1,34 t dimensions of the machine ca.: 2,9 x 0,95 x 1,66 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop auto ...

cutting diameter: 350 mm saw band length: 4160 mm cutting width: 400 mm : 350 mm : 350 x 350 mm Capacity 90° rectangular: 400 x 350 mm speed: 20 -100 m/min main drive: 2,2 kW hydraulic pump: 0,37 kW coolant pump: 0,12 kW dimensions of saw-band: 4160 x 34 x 1,1 mm work height max.: 860 mm total power requirement: 2,9 kW weight of the machine ca.: 1030 kg dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m Description: • Fully automatic miter band saw for sawing thick-walled Profiles and solid materials • Motorized roll feed of the material with electrical contact stop • Delta touch screen controls • Miter cutting, up to 45 ° • 1 program with 10 steps • Length accuracy 0.5 mm The feed length of the material is manually adjustable via an Microswitches selected that • Robustly constructed monoblock saw frame with hydraulic vertical movement and linear guide • Rapid advanc ...

cutting diameter: 650 mm saw band length: 8400 mm cutting width: 1000 mm capacity 90 degrees: square: 600 x 600 mm : 1000 x 600 mm capacity 45 degrees: round: 650 mm : 600 x 600 mm : 660 x 600 mm capacity 60 degrees: round: 440 mm capacity 60 degrees: square: 440 x 440 mm : 440 x 600 mm : 650 mm : 600 mm : 840 x 600 mm table height: 880 mm speeds steplessly adjustable: 20 - 100 m/min dimensions of saw-band: 8400 x 54 x 1,6 mm total power requirement: 12 kW weight of the machine ca.: 6,25 t dimensions of the machine ca.: 4,75 x 2,27 x 2,63 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 540 mm saw band length: 6000 mm cutting width: 750 mm table height: 695 mm cutting speed: 20 - 100 m/min : 540 mm : 540 x 540 mm Capacity 90° rectangular: 750 x 540 mm : 540 mm : 540 mm : 600 x 540 mm : 510 mm : 450 mm Capacity 45° rectangular: 450 x 540 mm capacity 60 degrees: round: 270 mm capacity 60 degrees: square: 250 mm capacity 60 degrees: flat: 250 x 540 mm total power requirement: 4 kW weight of the machine ca.: 2,45 t dimensions of the machine ca.: 3,0 x 1,3 x 2,13 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cu ...

cutting diameter: 230 mm saw band length: 2720 x 27 x 0,9 mm cutting width: 130 mm cutting capacity - flat: 90° / 320 x 130 mm cutting capacity - round: 90° / 230 mm cutting capacity - square: 90° / 230 x 230 mm cutting capacity - flat: 45° / R 220x60 /L 230x140 mm cutting capacity - round: 45° / R 180 / L 220 mm cutting capacity - square: 45° / R 150 / L 190 mm cutting capacity - flat: 60° / 120 x 105 mm cutting capacity - round: 60° /120 mm cutting capacity - square: 60° / 105 mm speed: 35 - 70 m/min total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 410 t dimensions of the machine ca.: 1,35 x 0,9 x 1,3 m The BMSY 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large wo ...

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - round: 90° / 320 mm cutting capacity - flat: 90° / 350 x 320 mm cutting capacity - square: 90° /320 mm speed: 20 - 100 m/min : 260 mm capacity 45 degrees: flat: 250 x 180 mm : 180 mm : 160 mm : 150 x 150 mm : 150 mm total power requirement: 1,5 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1900 x 1200 x 1350 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models ...

cutting diameter: 300 mm saw band length: 3270 x 27 x 0,9 mm cutting width: 420 mm feed per cut: 800 mm band speed: 35-70 m/min quick change toolholder: 300 capacity 90 degrees: square: 240 x 240 mm Capacity 90° rectangular: 420 x 200 mm : 240 mm : 230 mm Capacity 45° rectangular: 270 x 140 mm capacity 60 degrees: round: 165 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170 x 170 mm total power requirement: 0,9-1,5 kW weight of the machine ca.: 1090 kg dimensions of the machine ca.: 2800 2050 x 1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 440 mm saw band length: 5200 mm cutting width: 695 mm : 440 mm Capacity 90° rectangular: 610 x 440 mm : 4409 x 440 mm capacity 45 degrees: round: 410 mm : 440 x 440 mm Capacity 45° rectangular: 410 x 440 mm : 440 mm : 440 x 440 mm : 500 x 440 mm capacity 60 degrees: round: 320 mm capacity 60 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 250 x 440 mm table height: mm band speed: stufenlos 20-100 m/min total power requirement: 3,62 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 2,8 x 1,21 x 1,87 m Horizontal band saw with linear guideways, ideal for mitre cuts between 90° and +30°. Auto height adjustment sensors ensure that the bow can approach the material at high speed. The hydraulic cutting control allows the bow rise up again after a cut has been made. This process is controlled by digital counter on the control panel. The bow angle ...

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - flat: 90° / 350 x 220 mm cutting capacity - round: 90° / 270 mm cutting capacity - square: 90° / 260 x 260 mm cutting capacity - flat: 45°/ R 180x180/ L 240x160 mm cutting capacity - round: 45° / R 210 / L 240 mm cutting capacity - square: 45° / R 180 / L 240 mm cutting capacity - flat: 60° / 150 x 150 mm cutting capacity - round: 60° /160 mm cutting capacity - square: 60° / 150 mm speed: 34 x 68 U/min total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 31 m The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small pro ...

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Electric control-box Speed accelerator

MACHINES PERFECT

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Controlled spindle stop device N Electric control-box Speed accelerator

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Electric control-box Speed accelerator Controlled clutching device

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment Electric control-box Speed accelerator

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 730 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1400 mm Various accessories: Simple spindle stoping device Electric control-box Rocker arm with 1/1000 mm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.50 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Speed accelerator

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 16.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 17.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1400 mm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Controlled spindle stop device N

Round: from ? 12 mm to ? 80 mm Square: from 10 x 10mm to 70x70mm Rectangular: 80 x 60mm Full bar cutting: from ? 12 mm to ? 30 mm Max cutting lenght: 3.000 mm Min cutting length: 50 mm Max. tube Thickness: 3 mm Blade ?: 250 mm Blade Thickness: 2 mm Automatic Tube Charger

cutting diameter: 320 mm saw band length: 4160 mm cutting width: 610 mm : 320 x 320 mm Capacity 90° rectangular: 450 x 320 mm dimensions of saw-band: 4160 x 34 x 1,1 mm : 320 mm : 320 x 320 mm Capacity 45° rectangular: 280 x 200 mm : 320 mm : 320 mm : 420 x 320 mm speeds steplessly adjustable: 20 - 100 m/min table height: 860 mm total power requirement: 2,69 kW weight of the machine ca.: 1,03 t dimensions of the machine ca.: 2,23 x 1,15 x 2,14 m DG series horizontal bandsawing machines are ideal models for angle cutting of materials with varying number of cuts.It is possible to cut at variable angles between +45° and -60° by giving angle to the upper body of the machine.That machine makes the cutting hydraulically and automatically going up to the height after the cutting.The material is fed manually to the lenght stop and the cut is repeated. Standard Features: Saw Blade 34 Inverter ...

cutting diameter: 330 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 610 mm : 330 mm : 330 mm Capacity 90° rectangular: 610x 310 mm : 320 mm : 320 x 320 mm capacity 45 degrees: flat: 460 x 180 mm speed: 20 - 100 m/min total power requirement: 2,69 kW weight of the machine ca.: 773 t dimensions of the machine ca.: 2,1 x 0,85 x 1,3 m Our semi automatic horizontal bandsaw machine is suitable to cut full materials as pipe, steel cating, steel etc. By turning the vice jaws 0-45 degree cut can be processed. On semi automatic models, after finishing the cut, sawframe is lifted hydraulically up to the adjusted level. After finishing the cut, sawframe is lifted hydraulically up to the adjusted level. Metal sawblade and material roller table are supplied as standart. Standard Features: Blade Brash Coolant Pump Control Panel Hydromechnic Blade Tension Inverter Heavy Duty Gearbox Height Adju ...

Milling machine DECKEL MAHO DMG 125

cutting diameter: 440 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 640 mm : 440 x 440 mm Capacity 90° rectangular: 640 x 440 mm capacity 45 degrees: round: 440 mm : 400 x 400 mm Capacity 45° rectangular: 400 x 440 mm : 440 mm : 440 x 440 mm : 510 x 440 mm capacity 60 degrees: round: 250 mm capacity 60 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 250 x 440 mm table height: 850 mm cutting speed: 20 - 100 m/min dimensions of saw-blade: 3,1 x 1,2 x 1,91 m total power requirement: 4,67 kW weight of the machine ca.: 1,78 t dimensions of the machine ca.: 2,85 x 1,3 x 1,8 m Product Description Capacity of the machine is 440/640 and projected for fast cuttings straight or with angle . Sensetivity of the machine lets cutting with percentage angles. BMSY 440CDGH has automatic control system and open to future developments. Rollers on the table are designed for easy movement o ...

CNC Plasma Auto Bevel machine KOIKE VERSAGRPH-6000 3DP (2014) Width 4500 mm x 43 M, thickness 6-40 mm; "Plasma""I""cutting: 6 to 40mm; ""V""cutting: 9to 30mm; Power supply 3-phase 440V; Fluid oxygen 7~9.9 kg/cm; Fuel gas 1~1.5kg/cm (LPG); Air 7~9.9 kg/cm"; Cutting speed: 0~6,000mm/min; Marking Soeed max. 18,000 mm/min; Rapid speed:24,000mm/min (2014) Cutting bed dim: 30M x 4.6M Rail Length: 30M; Span: 6M With Chiller, Power Supply, Panel box, Cable rail, compressed air dryer, dust collector and Transformer Rails and cutting bed Attached to rails and cutting bed of Lot 313 Make KOIKE Serial VG-A-0218 Model VG-6000DXI Year 2014

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

MOSCA RO-TR-P-5 Strapping Machine A fully automatic MOSCA strapping machine type RO-TR-P-5. The machine is in very good condition. The original price was about 18,500 € Technical details: Heating wedge welding system with electronic heating regulation Fully automatic belt threading Drive of the unit in DC technology with wear-free direct drives Tape End Query with Tape Jam Throw Automatic belt ring ejection in case of incorrect triggering Belt coil quick-change system Wear-free, force-controlled belt guidance Integration into any processing line possible Hinged transport systems with frequency control PLC control Control panel for setting the operating modes, switching distances, strip tension Potential-free contacts to upstream and downstream systems Automatic PP straps width 5,6,7,8,9 or 12mm Data sheet & machine map under these links

USED FMC FOODTECH A144 AUTOCLAVE REF#: C6849 Sterilizer A144 manufactured by FMC FOODTECH General characteristics: Maker FMC FOODTECH Model A144 Year of manufacture 2006 Weight 2240 kg Maximum working pressure 4 bar Test pressure 5.72 bar Pressure safety valve 4 bar Maximum working temperature 205 ºC Steam conditions min. 6 bar / max. 7.5 bar Air conditions min. 5.5 bar / max. 6.5 bar Cooling water conditions min. 3 bar / max. 5 bar Capacity 6820 L Engine features: Tension 380 V Power 10 kW Frequency 50 Hz - 3P

Consisting of: 1 Fully automatic depalletizer, Krones Palmaster 1 Fully automatic palletizer, Kettner Pressant duplex 1 Pallet magazine 1 Pallet control Pallet turning stations Pallet conveyors Protection fence Further information: Equipped for Euro-pallets. With Siemens S7 control. Year of construction: 1995 The line is currently in production. A viewing is possible. Composed of: 1 Fully automatic depalletizing, Krones Palmaster 1 Fully automatic palletizing, Kettner Pressant duplex 1 pallet magazine 1 pallet inspection Turning stations / corner converters Pallet transporters Protective fence Further information: Equipped for Euro pallets. With a Siemens S7 controller. Year of construction: 1995 The line is currently still in operation. A visit is possible by arrangement.

Automatic seal-cut system for closing (merging) and trimming coated tubes with 2-stage OMRON Vision Control (AI)

USED SETRIMEGA 3.5 CELESTER AUTOCLAVE REF.: C5978 General characteristics: Manufactured by CELESTER Model STERIMEGA 3.5 Voltage 220-380 (50 Hz) Power 5 kW Design pressure 2.75 bar Test pressure 4.4 bar

Hot air sterilization for dry heat sterilization and depyrogenation. Autoclave with single-leaf door on both sides. Operating temperature: 160/250°. Chamber size: 1000 x 1450 x 1450 mm (depth).

Steam air sterilizer for the counterpressure sterilization of aqueous solutions in sealed containers. Pass-through autoclave with semi-automatic doors on two fronts. Hydraulic system made entirely of stainless steel. Capacity: 1470 litres. Operating temperature: 138.9°. Chamber size: 800 x 800 x 1250 mm (depth).

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

Guttridge fully automatic powder filling line Consists of Easyflo screw elevator conveyor with vibratory sieve that directly fills a 50Kg stainless auger filler, 300g - 4000g weight range, suitable for filling pouches / tubs / cans, brand new touch screen plc controls, height adjustable frame, with infeed conveyor, 1Ph

IROP Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6 bar Test pressure – 7.5 bar Manufacturer – IROP Insurance certificate– (last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1976 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

ITAL Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6.37 bar Test pressure – 8 bar Manufacturer – ITAL-RUBBER Insurance certificate –(last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1990 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

Rotary table polishing machine make Bula, model MP81 for sale. Continuously circulating machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system would also be available with a polishing paste system - liquid, consisting of 1 high-pressure dosing guns WIDOBERG HDP-2, holder, timer, etc. and pressure container.

Used autoclave ASCA with 240 liter capacity -overhauled- - Conversion from gas to electric heating, therefore as good as new - new insulation, new radiators, new control system - 240 litres capacity - electrically heated - Boiler, core temperature and F-value adjustable - completely overhauled - incl. s piece of half-height insert baskets made of stainless steel and base plate - Device mobile - Condition: Very good, ready for immediate use - 6 months warranty - Delivery time: 1 week after order Power: 14.5 kW, 400 V Operating pressure: up to 2.5 bar Temperature: up to 125°C External dimensions: 860 x 960 x H 950 mm Boiler dimensions: 638 mm diameter, 620 mm height The autoclave was completely disassembled, and the insert with lid and plate were installed in a new frame. The device is in perfect condition and is immediately ready for use. Inspection and test run ar ...

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

Product number: 2783 Type: Titaan 2-90 Serial number: HTN10220019 Year of construction: 2023 Chamber: 840 x 890 x 220 mm Seal bar: 2 x 840 mm Cycle: 30 - 50 sec Vacuum pump: Busch 300 m³/hr Compressed air: 6 Bar, 100 Nl/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2450 x 1100 x 1150 mm Weight: 850 kg Automatic lid and outfeed conveyors Hellings conveyor Type: 12980-10 Serial number: 790311 Year of construction: 2021 Belt width: 600 mm Length: 3000 mm Henkelman diptank Type: 200A Serial number: H0D20220008 Year of construction: 2022 Heating: electric Usable space: 575 x 1100 mm Emersion depth: 200 mm Cycle time: 22 sec Compressed air: 6 Bar, 50 l/min Power: 3 x 400V, 50Hz, 23kW Dimensions: 1200 x 2500 x 1350 mm Weight: 310 kg

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Electric control-box Controlled clutching device

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 6 mm Max. turning length: with flat cames: 62 mm Production capacity: 0.8 - 50 pce/min Spindle hole: 9 mm Number of tool cutters: 3 Tool dimensions: Ø6 x 34 mm Spindle speeds: Number of spindle speeds: 3 from: 2400 rpm up to: 6000 rpm Turret slide: number of tools: 4 Voltage 50 Hz 3x: 380 Volt Total power required: 2.5 HP Machine´s weight about: 1150 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 1600 mm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 6 mm Max. turning length: with flat cames: 62 mm Spindle hole: 9 mm Number of tool cutters: 3 Spindle speeds: Number of spindle speeds: 3 from: 2400 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2.5 HP Machine´s weight about: 1150 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 1600 mm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 10 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1500 mm Width: 750 mm Height: 1450 mm

Bar diameter: 0 mm Number of spindles: 0   Turning length: 0 mm CNC Brand: 0 CNC Model: 0 Control: PNC-DECO FANUC Technical data Number of axis total: 18 Number of cross slides: 6 Plain turning slide number: 5 Longitudinal carriage way: 160 mm Number back spindle: 1 Capacity round bar: 5-20 mm Workpiece length max.: 100 mm Spindle speeds: stepless up to: 6000 rpm Production capacity: 45 pce/min Voltage 50 Hz 3x: 400 Volt Spindle power: 15 kW Total power required: 43 kVA Machine´s weight about: 8500 kg Overall dimensions machine: Length: 3500 mm Width: 1600 mm Height: 1950 mm Various accessories: Bar loader number of bars: ROBOBAR Type: MSF 522/6 Coolant system Oil mist extractor: ELBARON Chip conveyor Pick-up spindle Lamp Status light Fire extinguishing system (without bottle)

Bar diameter: 0 mm Number of spindles: 0   Turning length: 0 mm CNC Brand: 0 CNC Model: 0 Control: PNC-DECO FANUC Technical data Number of axis total: 18 Number of cross slides: 6 Plain turning slide number: 5 Longitudinal carriage way: 160 mm Number back spindle: 1 Capacity round bar: 5-20 mm Workpiece length max.: 100 mm Spindle speeds: stepless up to: 6000 rpm Production capacity: 45 pce/min Voltage 50 Hz 3x: 400 Volt Spindle power: 15 kW Total power required: 43 kVA Machine´s weight about: 8500 kg Overall dimensions machine: Length: 3500 mm Width: 1600 mm Height: 1950 mm Various accessories: Bar loader number of bars: ROBOBAR Type: MSF 522/6 Coolant system Oil mist extractor: ELBARON Chip conveyor Pick-up spindle Lamp Status light Fire extinguishing system (without bottle)

LIQUIDATION of pneumatic automatic stuffing machine of the manufacturer Maquinaria cárnica Serrano SL, for collagen or natural casing. Manufacturer SERRANO, AUTOMATIC model, semi new condition. Machine for stuffing loins, headboards etc The machine can stuff products in: fibrous casing, plastic casing or collagen and natural. Machine adaptable to any type of fibers. Maximum embuchado dimension 700 mm. long. Maximum working pressure 6 bar. Fully pneumatic operation. Knee drive, fully automatic. Production of 350 cycles/hour. Built entirely in stainless steel. Easy and fast mold and funnel change system without tools. Embossing diameter 80 mm. Machine approved according to CE regulations.

High-speed labeling train from the manufacturer BIZERBA, model GLM-i. Composed of 3 labeler heads: 2 upper and 1 lower. Weighing range: up to 15kg. Printing mode: direct thermal. Print resolution: 8 dots. Print speed: maximum 300 mm/s. Label size: minimum 30mm / 30mm, up to maximum 100mm / 100mm. Core diameter: 76 mm. Label roll diameter: outer 300 mm. Labeling technology: air applicator. Interfaces: ethernet and RS232 standard. RS 485, TTY. Packet recognition: Working temperature: from 0º to +40º Electrical power 230V, 50Hz, 24A. Pneumatic pressure. 6 bar. External measurements: 3050 mm long x 1000 mm wide x 1700 mm high.