aus used for sale

Emergency Stop Relay PILZ PNOZ X2.1 24V AC/DC 2n/o ( PNOZX2.124VAC/DC2n/o ) 774306 24 V AC/DC 4.5 VA / 2 W 230 V 5 A used, tested ! Dimensions: 86 x 22 x 120 mm

Emergency Stop Relay PILZ PZE 7 6S / 1Ö ( PZE76S/1Ö ) 474050 24 V DC 4 W 230 V used, tested ! Dimensions: 125 x 90 x 80 mm

Emergency Stop Relay, Safety Relay PILZ P1HZ 2 2S ( P1HZ22S ) 474580 24 V DC 2 W 240 V New ! Dimensions: 116 x 80 x 45 mm

Emergency Stop Relay PILZ PNOZ X2 24V AC/DC 2S ( PNOZX224VAC/DC2S ) 774303 24 V AC/DC 2 VA / 2 W 230 V 5 A used, tested ! Dimensions: 86 x 22 x 120 mm

Command device, push button, with optical display PAGUS Emergency stop 2x Switching element: SIEMENS 3SB3400-0a Switching capacity: 230 V AC, 6 A one NC / one NO each 1x Display element: SIEMENS 3SB3400-1G Operating voltage: 6 - 230 V AC / DC wall enclosure: RITTAL KL1502 Dimensions: 200 x 200 x 120 mm used, tested ! Dimensions ( packaging ): 220 x 200 x 170 mm

Emergency Stop Relay PILZ PNOZ 1 3S / 1Ö ( PNOZ13S/1Ö ) 475695 24 V DC 3,5 VA 230 / 400 V used, tested ! Dimensions: 90 x 80 x 110 mm

Emergency Stop Relay PILZ P2HZ/3 474360 24 V DC 4 W 250 V AC 1.5 A used, tested ! Dimensions: 90 x 80 x 110 mm

Emergency Stop Relay PILZ PNOZ 3 5S / 1Ö 1W ( PNOZ35S/1Ö1W ) 474894 24 V DC 4,5 VA 230 / 400 V used, tested ! Dimensions: 135 x 80 x 115 mm

AUSERE VOLUMETRIC FILLER WITH 6 STAINLESS PISTONS WITH PILFER CAPPER Filler for containers up to 5 liters 6 HEADS Linear and mechanical operating machine for packaging viscous products (OIL, DETERGENT, SHAMPOO, etc.) in GLASS, PLASTIC or CAN containers. Pilfer capper. It was filling food oil. Characteristics Piston capacity: 5L Width: 2000mm Height: 2300mm Length: 3000mm Year 2010 Voltage: 400v Consumption: 4.5kW Pressure: 6bar Production: 120L/min SELF-ADHESIVE LABELING MACHINE WITH 3 HEADS Three-head labeling machine (label, counter label and denomination seal) for self-adhesive labels. Designed to label bottles, jars, containers (round, square containers, etc.) with self-adhesive label. Automatic self-adhesive linear labeling machine. Constructed entirely of stainless steel.

Emergency stop relay PILZ PNOZ 10 24V DC 6S 4Ö ( PNOZ1024VDC6S4Ö ) 774009 24 V DC 4.5 VA 250 / 400 V used, tested ! Dimensions: 90 x 90 x 120 mm

Silver coin Austria 100 Schilling pp 500 years mint Hall, silver .640 23.93 gr, strongly tarnished, rubbed, encapsulated, KM2936

Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999

Manufacturer: Heesemann Spindelhubgetriebe 2 Stück, Type: aus Heesemann LSM 8, Motor with gear: 2 Stück Verstellung Schleifaggregate, Motor with gear: 2 Stück Verstellung Schleifaggregate,

Manufacturer: Heesemann Spindelhubgetriebe, Type: aus LSM 8, Year: 2 Stück, Year :2 Stück

Manufacturer: Homag aus Homag KF 20, Type: Ein und Ausgangskarten Streckensteuerung,

Manufacturer: Homag Anschlaglineal gesteuert, Type: aus KFL 10, FREITEXT1: Pneumatisch gesteuert, FREITEXT2: 8 fach Revolver, FREITEXT3: 10 mm Schiene, FREITEXT4: mit Befestigung Kettenbahn,

Ladies and gentlemen, Offer Textile conveyor belt approx. 180 tons With a friendly greeting Trade & Translations

Cat No. 14-0007 in a very good condition Measurements and Weight: WxHxD: 600 x 460 x 400 mm Weight approx: 44 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

TRUCK trailer coupling Ringfeder type 4040 / G 150 version A 2011/02.

We offer a retractable gravity conveyor for sale. It has minimum dimensions 2218 mm 8735 mm max. Width 760mm Technical data: Length retracted: 2218 mm Length extended: 8735 mm Width: 760mm Height: adjustable from 730-1040mm Rows of rollers: 67 units maximum load capacity: 400kg / M Net price: â?¬2295 / piece Number available: 12 pieces

We offer a retractable gravity conveyor for sale. It has minimum dimensions 2218 mm 8735 mm max. Width 610mm Technical data: Length retracted: 2218 mm Length extended: 8735 mm Width: 610mm Height: adjustable from 730-1040mm Rows of rollers: 67 units maximum load capacity: 400kg / M Net price: â?¬2050 / piece

pressure:120 t table length:600 mm table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Oil cooling (electric):1,5 kW (max) table height:875 mm Working height from to:500 mm diameter of piston:230 mm total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm :650 mm capacity of ejector in table:20 t :150 mm Recommended oil:46er

Swimming / sinking system, swimming / sink container with discharge belt, washing bath, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: NUNBERGER conveyor systems Type KB 600 Filling height approx. 2 m Bathroom approx. 4 x 2.4 x 1.6 m Chain tape for discharge of sinking materials Bandwidth approx. 600 mm Belt drive with gear motor 1.5 kW (dismantled due to transport height) Total dimensions: approx. 5.5 x 2.4 x 3.1 m The plant was used in fruit and vegetable production. It is also possible to use plastic to clean. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Squeezers for dough strands

Kettle 71 cm for spiral mixer stainless steel baker ? Product? Manufacturer: unknown? Condition: used, baker's condition? Material: stainless steel? Interior : 71 cm, 48 cm high? Exterior : 75.5 cm, 87 cm highSee pictures for details.

Spare parts for spiral mixer Kemper SP 150 extendableas shown in the picture ismotor untested

Motor for Spiral Kneader Kemper SP 150 ExtendableUnused Motor for Spiral Kneader Kemper SP 150 ExtendableWe have 2 pieces in stockDetails see picture

Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch -Punch holder: Ø 22 mm -Matrix holder: Ø 40 mm -Dimensions: 310/400/H50 mm -Weight: 26 kg

SKOMAB hydraulic notching machineTechnical specifications:Table size: 760 x 600 mmExternal dimensions L x W x H: 1000 x 700 x 1300 mmWeight approx: 400 kgWith- several notching toolsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tool Grinding Machine Twist Drill Pointing Machine Make EIGENBAUExternal dimensions W x D x H: 600 x 650 x 1500 mmlargest grinding wheel diameter: 200 mmThe machine has been prepared to tip out twist drills with MK2 shank.usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Frees boor; freesboor; freesmachine

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Collet: Ø 8/10/12/20 mm -is only sold complete -Weight: 4 kg

Tires, tractor tires, tillage, seed drill -Number: 3x tires from an Amazone seed drill -Wheel size -Hub: Ø 40 mm -Dimension: Ø 750 -Complete price: for 3 tires -Weight: 51 kg/piece

Tool holder, milling holder, milling tool -Number: 9x SK30 mount -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -with transport box -is only sold complete -Weight: 10 kg

Tool holder, milling holder, milling tool -Number: 6x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 24 kg

Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg

Boom suitable for Volvo ECR 88 (year of construction 2005, s/n: 10296)

Hubkneter, Fabr. Diosna Type 4 a 2G, extendable

Squeezers for fillings, Rademaker,

Ringoplat digestate carrier / plastic bread roll plank,

Double cone kneader, W & P, DK 65, extendable

Clip outlet for clipping machine FCA 3430-18 Poly Clip Item number : 157124 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Manufacturer: Homag Eltec Steuerkarte, Type: Hmag-2/mit ACR 1 Ausgang, Model: CPU 30 E16-103 4 MB 25 Mhz ohne Grafik,

Manufacturer: Homag, Type: Motorhalterplatte mit pnematischen ein und Ausrücken, From machine: Homag FÜL 526,

Manufacturer: Homatic, Type: Ausgangskarte 16x220V, Model: 2us ohne RC-Glied, Serial number: 2-083-01-5203, Nur Abholung : 350,