We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,126 used machines on RESALE, but how to find them? Machine Search
new
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) with a spout on top. Suitable for small pre-made bag. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-310)xW(60-180) | fill ...
new
Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) without zipper. Suitable for middle-sized pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-310)xW(60-180) | f ...
used
For sale, completely overhauled flour packaging machine 1kg. The machine includes a auger feeder with a mixer as well as an automatic gluer. Capacity approx. 1t per hour (20kg/min).
new
Vertical mixing silo. Approximate capacity 56 m3, dimensions Ø3.590x8.370 mm of total height. Made of steel S-235 and built in sheet thickness 3 mm with perimeter rings of reinforcement UPN-80, support structure by means of 4 pillars HEA180 mm braced with HEA-120 profiles, inner thread of Ø300 mm, step 200 mm with shaft tube of 114.3x6.02 mm placed in tube-jacket of Ø 355x4,78 mm, registration on the side for visit and inspection and in the lower tube for emptying in case of jamming or breakdown, equipped with safety system, 4 inspection sights, two upper ventilation vents, maximum level indicator FILSA type MS-1, transmission by pulleys and belts with 22 kW motor at 1,000 rpm with safety protections, discharge pipe 200x200 mm connected to inner screw jacket of mixer with manual closure at the outlet mouth, Nozzle at the bottom of cone for complete emptying of machine, cat ladder with ...
used
Hopper – gravity charge Auger: 38CrMoA1A, nitrided – new Cylinder: 38CrMoAlA, nitrided, bimetallic, air-cooled – new ; Motor power: 160 kW A.C. controlled by inverter Screw diameter: Ø130mm; L/D=38:1; Maximum speed of screws: 140rpm Degassing system: vacuum pump : 3kw Double degassing Heating zones: air-cooled heaters Air cooling, cooling power: 0.37Kw×7; 7 cylinder heating zones + 5 additional zones per head Productivity: up to 450 kg/h
used
Single screw extruder, Troester year of manufacture 1992 Auger type: 38CrMoA1A, nitrided Cylinder: 38CrMoAlA, nitrided, air-cooled cylinder; Motor power: 55kW A.C. engine – no speed control Engine speed: 1480rpm Screw Diameter:90mm; L/D=38 Degassing system: vacuum pump : 3kw Double degassing Heating zones: ceramic heaters, air-cooled Cylinder cooling - air Output: up to 180 kg/h Net price; 8 500 Eur – cracked reducer body – to be repaired – poor condition of the plasticizing system Net price; 11 900 Eur – repaired reducer body – started
used
Mini Excavator Windstorm XN10 Rhinoceros Diesel Excavator FROM STOCK Net price plus 19% VAT Description Mini Excavator Windstorm XN10 Rhinoceros 1 Cylinder Diesel Excavator Condition: New. available with articulated arm. Surcharge 720 euros. incl. Shovel 400mm -Roof and roll bar -Tool -Hammer line -Work lights Optional: Mech. Quick coupler with 2 bolts : 260 euros Bolt for quick coupler : 10 euros Fang : 210 Euro Mech. Gripper : 320 Euro Rake : 210 Euro Hydr. Hammer : 1780 Euro Hydr. Earth auger : 680 Euro Hydr. Shovel 600mm : 520 Euro Hydr. Shovel 800mm : 590 Euro Load hook : 170 Euro Shovel 200mm : 205 Euro Shovel 400mm : 270 Euro Shovel 600mm : 310 Euro Shovel 800mm : 340 Euro Sale takes place with invoice with shown VAT. 19% VAT included in the price. 015121271265 Model WINSTORM XN10 Fire RHINOCEROS Operating Weight 85 ...
used
Mini excavator Windstorm XN10 Knickarm/Knickmatic from stock new Net price plus 19% VAT Description Mini Excavator Windstorm XN10 Rhinoceros 1 Cylinder Diesel Excavator Condition: New. Articulated arm / articulated mates from stock Book available incl. Shovel 400 mm -Roof and roll bar -Tool -Hammer line -Work lights Optional: Mech. Quick coupler with 2 bolts : 260 euros Bolt for quick coupler : 10 euros Fang : 210 Euro Mech. Gripper : 320 Euro Rake : 210 Euro Hydr. Hammer : 1780 Euro Hydr. Earth auger : 680 Euro Hydr. Shovel 600mm : 520 Euro Hydr. Shovel 800mm : 590 Euro Load hook : 170 Euro Shovel 200mm : 205 Euro Shovel 400mm : 270 Euro Shovel 600mm : 310 Euro Shovel 800mm : 340 Euro Sale takes place with invoice with shown VAT. 19% VAT included in the price. 015121271265 Model WINSTORM XN10 Fire RHINOCEROS Operating Weight 850kg ...
used
Three-phase electric motor STEPHAN-WERKE Type: ED 63 N 12-4 ( ED63N12-4 ) 0,0,18 kW 1350 rpm 220 / 380 V 3AC 50 Hz Design: B14K IP44 shaft diameter: Ø 11 mm with worm shaft: Ø 25 x 45 mm / auger Ø 22 x 35 mm / Ø 14 x 5 mm / Ø 10 x 12 mm pitch ( Screw ): 5.5 mm Wavelength ( total ): 100 mm Flange diameter: Ø 60 / 90 mm bolt circle diameter: Ø 75 mm 4x threaded hole: M5 x 0.8, depth: 7 mm New ! Dimensions: 290 x 130 x 175 mm
used
TECNOVA MONO SCREW EXTRUDER 130 mm 54 L/D double degassing system For LDPE HDPE PP PC PS ABS, Average output 400/600 kg/h depending on material and feeding rate, Total installed power 530 kw, – about 318 kw used in work Construction year 2015 Screw diam. 130 mm 54 L/D Bi-metallic barrel A.c. motor 200 Kw + inverter Double degassing system (degassing points about 2 mt.apart for excellent results) non-stop screen changer with diam.300 mm screens AVAILABLE FITTED WITH FULLY AUTOMATIC SCREEN-CHANGER NEW or USED Hydraulic pack Vented electric cabinets Water ring pelletizer Stainless steel centrifugal drier Vent The line is offered TOTALLY RECONDITIONED Find out on our how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of vibro classifier, bag filling/weighing station, upstream equipment, Availble on request: scrap silo + auger + crammed feeder, [h ...
used
OMP PREALPINA 180 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, Constructed in 2002, The line includes:, (OPTIONAL - Buffer silo with agitators and feeding auger), forced feeding unit, extruder with 180 mm screw 35 L/D, vacuum degassing system, 415 kw drive, semi-automatic screen-changer with 300 mm diam. screens., water ring pelletizing unit, drying centrifuge, vibro-classifier, electric cabinets for managing the line, throughput rate 1.000-1.400 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Running until October 2023, Available RECONDITIONED (various steps meeting your budget), Available with FULLY AUTOMATIC SCREENCHANGER on request., See how we recondition [HERE](https://www.germanplast.eu/pages/what-we-do), ask for video of the line running
used
PREALPINA 85 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, The line includes:, Buffer silo with agitators and feeding auger, forced feeding unit, extruder with 85 mm screw 35 L/D, vacuum degassing system, semi-automatic screen-changer, water ring pelletizing unit, drying centrifuge, vibro-classifier, electric cabinets for managing the line, nominal throughput rate 180.240 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 1995, The line is offered RECONDITIONED, Running until October 2023, Available AS IS or RECONDITIONED (various steps meeting your budget), Available with FULLY AUTOMATIC SCREENCHANGER on request.
used
Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.
used
for LDPE HDPE PP ABS PC PS, Nominal throughput rate 350-450 kg/h depending on feeding reate and material including scrap silo fedding auger crammed feeder extruder with 105 mm screw 40 LD double degassing 110 kw a.c.drive non stop hydraulic screenchanger water ring pelletizer drying centrifuge electrical cabinet user’s manuals and drawings constructed in 2000 offered RECONDITIONED, On request, we can fit this extruder with a fully automatic screenchanger.
used
Key data: 1300 kN, 95 g/PS, 25 mm
1.0 pcs. Injection molding machine Manufacturer: ARBURG Type: 420C1300-250 Year of construction: 1999 Clamping force: 130 tons Tie bar spacing 420 x 420 mm Screws DN: 25 mm Displacement: 106 ccm³ Moulded part weight 95 g/hp Control: SELGOCIA Equipment: -1 x Core Pull -Interface robot -Interface temperature control unit -Position-controlled auger
used
Washing basin: 1100x250x900 mm. With 3 blades, geared motor: 0.18 Kw. Auger 200 mm Ø for material output at 1.50. With geared motor: 0.75 Kw.
used
Cutting chamber: 600x220 mm, motor: 18.5 Kw (25 hp). Semi-enclosed stepped rotor. With flywheel. Auger with material output: 100 mm Ø and geared motor: 0.75 Kw with direct start.
used
Conveyor screw, screw conveyor, conveyor technology, pipe conveyor screw, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, screw dryer, drying system, belt dryer for digestate, grain, wood chips, sewage sludge -Screw was designed for a heating plant to discharge the ashes and was not yet in use -Screw tube and screw are double-walled and can therefore be cooled or heated -Execution: stable -Inlet: 1380 x 340 mm -Spout and control flange: Ø 360 mm -Screw and body made of: 30W02/3 -without motor -Screw diameter: 300 mm -Diameter screw tube: 220 mm -Length of screw: approx. 7600 mm -Infeed pitch screw: 55 mm -Outlet slope auger: 215 mm -Dimensions: 9050/610/H1100 -Weight: 2600 kg
used
Key data: 630 mm, 560 mm, 560 mm
Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m
used
Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m
used
Vertical Milling Machining Center HAAS VF-11/50 Table dimensions, mm: 3005 1000 Max. movement along the X axis, mm 3048 Max. movement along the axis Y, mm 1016 Max. displacement along the Z axis, mm 762 Maximum spindle speed, rpm 7500 Completely cast iron bed Fully enclosed, sealed safety guard Servomotors for axial movements through a gear motor Steel hardened guide bearing blocks Ball screw with double fastening and pre-tensioned nut Automatic lubrication system for guides and ballscrews Ball screw thermal expansion compensation system Retractable coolant tank design Coolant system with 358 liter tank Manual air gun for removing chips from a part and a machine Automatic centralized lubrication system Machine lighting Machine Status Indicator Lamp Electromechanical door lock for work area fencing Auto power off function Set of adjusting supports Metric Desktop Sp ...
used
Machine is in very good condition 15 screen X : 406 mm Y : 305 mm Z : 254 mm(Can be extended to 360 mm) Chip Conveyor Auger
used
Equipment Condition - Good Characteristics: - Injection code 180N - Screw pair diameter 40 mm - Execution of the screw M7 - barrier auger - Open nozzle - Vibration mounts - Standard injection speed - Pusher return control In a set: - Lithium industrial mold for the manufacture of parts M2 nozzle for the bioreactor, 4 nests. - Hot channel temperature controller, including connecting cables and 8 zone connectors - Spare socket (die and punch) for the production mold for the manufacture of the part âM2 nozzle for the bioreactorâ - Dispenser volumetric LYBRA LV2 - Single phase loader S52 - Water chiller SCA1911 - Crusher model 32-20 / JM - Belt conveyor N-CPR4 additional characteristics in attachments
used
Battenfeld BA 2000 / 1000 BK injection moulding machine Year: 1997 Driver Version: Unilog 4000 B Technical Details : Clamping Unit: Clamping force: 2000 kN Mold plate size (h x v): 800mm x 800mm Distance between columns (h x v): 560 mm x 560 mm Mould opening stroke: 450mm Mould height min.: 220 mm Maximum mould height: 520 mm Max. daylight: 970 mm Hydraulic ejector - stroke: 160 mm Forward/reverse ejector force: 67 kN Injection Unit Screw diameter : 55 mm Ls/D Ratio: 20 Injection pressure: 1943 bar Injection volume: 522 ccm Injection weight, PS: 595 g Auger speed: 285 1/min Maximum plasticizing rate: 49 g/s Nozzle pressure: 131 kN Electrical & Hydraulic Equipment Nominal pump motor capacity: 30 kW Installed heating capacity: 22.6 kW Tank capacity: 560 ltr. Dimensions & Weight Machine dimensions: 5.65 m x 1.45 m x 2.10 m Total weight of the machine: 9800 kg
used
Used vending machine grinder SEYDELMANN - With loading for 200 litre boiler - Feed auger - various wolf discs - incl. approx. 30 different knives - Processing of mass up to a temperature of 0°C possible without any problems - not suitable for frozen meat - Maximum capacity of 170 kg Viewing and test run are possible by arrangement.
used
The line is offered TOTALLY RECONDITIONED., PREALPINA EXTRUDER 180 mm. 2 degassing points, for LDPE HDPE PP PS PC ABS EPS EPE EPS XPS..., average throughput rate 800-1.200 kg/h depending on materials and feeding rate Including: Buffer silo with agitators and feeding auger. Forced feeding unit. Extruder with 180 mm bimetallic screw 40 L/D Double vacuum degassing system a.c.355 kw a.c.drive controlled by ABB inverter Semi-automatic non-stop screen-changer with 300 mm diam. screens., FULLY AUTOMATIC NEW SCREEN-CHANGER AVAILABLE (+200 K€ +/-) hydraulic power pack Water ring pelletizing unit. Drying centrifuge., water re-circulating tank, Heat exchanging unit on gearbox group + cutting unit. Vibro-classifier., Control panel with touch screen Electric cabinets for managing the line, Constructed in 2006. Total installed power 650 kw, average used in work 420 kw User’s manuals, drawings, CE. ...
used
ID3099 Liebherr LRS year/Year of construction 2008 Concrete recycling plant with control system, rinsing gallows, water trough and wash-out screw. Without pumps Concrete recycling plant with control system, flushing gallows, water trough and washout auger. Without pumps
used
I am selling a Nissey injection molding machine made in Japan in 1989. Closing force 1610 kN Distance between columns 460x460 mm Auger diameter 50 mm Injection volume 353 cm³ Material pressure 1715 bar Installed power 32.3 kW Condition - faulty, reason - they did not find a specialist to configure the hydraulic pump control unit after replacing it with a new one. Price is negotiable
used
Grapes, fruit and berry press -Juice and pomace tub on sliding table, (pomace tub with auger, juice tub with pump and control) -Central filling as well as fixed cleaning line -New Prestuch in 2022 -New drainage hoses, stockings in 2021 -New lid seals in 2022 -Various electrical components in control renewed 2021 -Matching pre-juicer to go with it.
used
Modular labeling machine 10 heads Modular labeling machine Cold glue 4 stations Front back seal L neck ring self adhesive 3 stations Front back neck ring Bottles round square Label stations nr N 3 self adhesive stations N 3 Cold glue stations Central diameter 960 Plates nr 10 Length of the labels min max 10 150 Height of the label min max 15 200 Container diameter height min max 30 80 mm Altezza min max 100 400 mm Plate transmission Motorized plate Optical centering Yes Special inlet stars No 3 multi format in out stars D 50 120 mm Industria 4 0 yes predisposed other request Double screw input in phase Max speed request 6 500 bph Modular labeling machine basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production ...
used
Used Capsuling Machine Nortan Unicap 35T Aurora 1999 Machine with clockwise rotation equipped with a single heat shrinking head for thermal capsule and 4 rolling heads for polylaminate tin capsule Machine that reaches 2200 pieces per hour It has an automatic tray pick up system linear pick up system with a capsule glass that is made every time on the basis of the customer s capsules It can be delivered both seen and liked and overhauled it has been detached and is in perfect working order Machine that has the analogue operator panel on the right side with the push button panel On the left side the automatic capsule picking warehouse Closed Boxed Conveyor Belt 82 5 x 82 5 Auger with adjustments at the entrance Sold with a bottle format and a complete capsule format [...for more information send your inquiry to the seller.] refno: CA63
used
Used Syrup Room 15 000 Lt h PROGECO 2003 This is a used Syrup Room from PROGECO a well known manufacturer in the industry The model is SS 450 and was manufactured in 2003 It has a speed of 15000 liters per hour making it a suitable option for high volume syrup production Currently the Syrup Room is in a ready to operate state and comes equipped with necessary safety features to ensure secure operations Additionally manuals are provided to facilitate easy installation and maintenance The Syrup Room runs on V 380 kW 37 and Hz 50 electrical data making it a reliable option for powering large scale syrup production operations With its high speed capacity and reliable performance this used Syrup Room from PROGECO is an ideal solution for any syrup production facility Technical Data 4000 liter agitator sugar dissolving tank dissolution exchanger plate heat exchanger for 12 000 liters for heat ...
used
Used Hot Melt Labeling Machine Kosme 20000 bph The velocity of this machine reaches max 20 000 bottles per hour BPH Kosme works primarily with PET containers a material extensively used in the beverage industry The 16 plates have a movement controlled by a mechanical cam system with brake and clutch This system ensures precision during labeling operations The single labeling station operates in a clockwise rotation direction Type of hot melt system From the label application perspective the labeler uses a hot glue method This method although traditional provides durable adhesion between the label and the container The Kosme labeler has an Adjustment system related to the different labels manual but has the head adjustments through an electrical system Technical specification of the Used Hot Melt Labeling Machine Kosme 20000 BPH Other technical specifics include the working diameter set a ...
used
Used adhesive labeling machine PE labelers overhauled up to 6000 BPH Complete transformation from a mechanical machine to an electronic machine Used rotary labeler overhauled up to 6000 complete replacement of the head with new plates motors boards and double jacks for optical centering replacement of groups with 3 new adhesive groups PE labeler or PackLab type complete overhaul of the glue group for the l shaped seal for the PE labelers review of seal stretching pliers new electrical panel new complete and CE standard protections for the PE labelers installation of the touchscreen and plc control panel new certifications for Used labeler rotary machine overhauled up to 6000 a bottle passage format for the Used adhesive labeling machine overhauled up to 6000 composed of auger entry exit star counter star 11 one seal format per glue group for adhesive rotary labeling up to 6000 complete w ...
new
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...
used
Used root vegetables line by Boema. New 2007. Capacity 6000 kg/h. The line consists of: 1. Straight rubber lifter 2. Drum soil remover 3. De-stoning machine 4. Drum rinser 5. Straight elevator made of PVC 6. Steam peeler 7. Cooling tub with auger 8. Brush peeler 9. Single-screw pump with self-discharge hopper 10. Drum filter 11. Control belt
used
General SKU267M231 LocationBarneveld MakeAba-Alite Ltd. TypeM 300 No.96/12026 Year of construction2013 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel Auger filler(1x) With screw dosingcheck Number of dosing heads:1, Outlet dia. 14mm Screw diameter14mm With motor0,09 KW, 380 Volt With hopper(Cap. 1,5 Ltr) Information With switchcheck Floorspace0,6x0,5 M Total height0,6 M Weight50 KGPowder fillersAba-AlitePackaging machines > Powder fillersBrand > Aba-Alite What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Key data: 1000 kN, 127 g/PS, 35 mm
Regularly maintained machine that is always kept in top condition. The screw rotation is done with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF floppy disk. The display can be done in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 auger for technical materials in good condition. A video of the operation of the machine has also been created, which can also be tried out in person at our site. Please see our other ads.
used
Features: Year. 2002, ISO 40 spindle, MITSUBISHI cnc, 20 positions random tool change, 8000 rpm. Racing axes 1007 X 560 X 510 External dimensions 2500 X 3000. Auger chip conveyor. PROMPT DELIVERY Live, very silent machinery.
used
The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Calibration - Ergocheck 1.2016 — Replacement of a faulty hydraulic system pressure sensor. scheme 1.2015 – repair of the nozzle rod. units 2.2014 — Replacement of the chamber, auger and tip 1.2013 — Replacement of the screw and tip 6.2012 – Repair, re-sealing of the injection cylinder. units 11.2010 — Repair of proportional valve 4.2008 — Replacing the control panel display 3.2008 — Replacing the proportional valve 3.2008 — Calibration — Ergocheck 12.2007 — Replacing the tip
used
Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 A439697 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.
used
ENDLESS DOFFERER For the automatic dosing of powdered products to the packaging machine with high precision. CHARACTERISTICS: Made of stainless steel. Height adjustable. Dosing speed commanded by servo motor. Stirrers independently driven by geared motor 50 dm³ hopper with easy opening for cleaning. sanitary filter Hopper level to regulate automatic feeding. Complete set of auger in stainless steel.
used
Mixer with double rotation internal auger (conical-concentric). The BONFIGLIOLI gearmotor unit that turns the helical reel consists of: - Three-phase asynchronous motor (IP-55 protection degree), with nominal electrical power Pn = 0.37kW, and absorbed current (at the frequency of 50Hz which is in force in Europe), equal to: - In =1.85 Ampere if powered at 230Vac line voltage - In = 1.07A, if powered at the star voltage of 400Vac (as in the LdF factory) If, for example, it were used in the USA, where the frequency is equal to 60Hz and the power supply voltage is 460Vac, the power that the motor can develop is greater (Pn=0.45kW) and the absorbed current is In=1, 09Ampere.
used
On and off when needed Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power about 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuum vent 4 kW Discharging hopper complete with 200 mm diam. diagonal auger for agglomerated material 1,5 kW drive.size Z x ...
new
VERTICAL MIXER, 10 m3 capacity, total height approx 5.400 mm including transmission group, max Ø 2.300 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual
used
Guttridge fully automatic powder filling line Consists of Easyflo screw elevator conveyor with vibratory sieve that directly fills a 50Kg stainless auger filler, 300g - 4000g weight range, suitable for filling pouches / tubs / cans, brand new touch screen plc controls, height adjustable frame, with infeed conveyor, 1Ph
used
Description: Machine number: 211355 Operating voltage: 400V Frequency: 50Hz Control voltage: 230 V Rated current: 80 A Total rated current: 118 A Total connection: 62 kW Closing force: max. 1100 kN Closing force: max. 50 kN Opening force: max. 34/255 kN Opening distance: max. 500 mm Tool installation height: at least 250 mm Distance between the clamping plates: max. 750 mm Light column spacing: 470 x 470 mm Tool platens: 637 x 637 mm Weight of movable tool halves: max. 760 kg Ejector force: max. 40 kN Ejector path: max. 175 mm Screw diameter: 30 mm Effective auger length: 20 Snail travel: max. 120 mm Calculated displacement volume: max. 85 cm³ Shot weight: max. 77 g PS Material throughput: max. 13.5 kg/h PS Spray pressure: max. 2000 bar Injection flow: max. 236 cm³/s Screw torque: max. 250 Nm Nozzle contact force: max. 50 kN Nozzle lifting path: max. 210 mm ...
used
Table: 3500x1100 mm Number of T-slots: 6 T-slots measures: 22 mm Maximum weight on table: 8000 Kgs X-axis traverse: 3000 mm Y-axis traverse: 1250 mm Z-axis traverse: 1500 mm Milling head model: Automatic UAD 0.1º Spindle taper: ISO 50 (Din 69871) Clamping system: Hydraulic Speed range: 6000 r.p.m. Spindle power: 37 kw Feedrate: 30 m/min Rapid traverses: 1.2m/s2 Year: 2005 Equipped with: Control: SELCA S4045D Electronic handwheel: Yes Chip conveyor: 2 auger type + 1 lateral Internal and external cooling: Yes Splash guard: Perimetric covers Tool measurement probe: HEIDENHAIN TS
used
TECNOVA EXTRUSION LINE 130 mm.500 kg/h, PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw drive, Semi-automatic non stop screen-changer with screens diam.250 mm., Available with a [FIMIC RAS 400](https://www.germanplast.eu/listings/5241333-used-2007-fimic-ras-4 00-automatic-screenchanger), Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, not working from 2010, Offered reconditioned (various steps to be agreed upon), (see how we recondition on our WHAT WE DO page on top)
new
VERTICAL MIXER, 5.000 lt.capacity, total height approx 4.500 mm including transmission group, max Ø 1.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 7,5 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power : 7.5