aty machine used for sale

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2840 rpm at 50 Hz -Shaft mounting: Ø 15 mm -Weight: 12 kg

Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 370 mm bore stroke: 200 mm spindle taper MT: 4 MK table:: 580 x 460 mm column diameter: 160 mm turning speeds: 75 - 2020 U/min feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement: 1,5 kW weight of the machine ca.: 700 kg. range L-W-H: 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 2 - 20 mm sharp cornered angle min./max.: 90 - 135 Grad connected load: 230 V weight of the machine ca.: 8,6 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 (500) mm : 45 (500) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 80 x 9 (800) mm Axis diameter: 60 mm work speed: 5,0 m/min Tool diameter: 195 mm total power requirement: 3 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg

sheet width: 1290 mm plate thickness: 5 mm pre-bending: ja roll diameter: 120 mm roll speed: 1 - 6 m/min total power requirement: 1,1 kW weight of the machine ca.: 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

grinding diameter: 1520 mm grinding length: 6000 mm grinding wheel size: 660 mm steady: 800 mm steady: 800 mm total power requirement: 15/25 HP weight of the machine ca.: . t dimensions of the machine ca.: . m 2 Steadies Coolant System The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions: 670 x 430 x 870 mm : 670 x 430 mm semi-autom. working: SEMI-AUTOMATIC band length preselection via POTI Band voltage manually via coupling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

max. wheel diameter: 0 mm gear width: 0 mm max. module: 40 min. module: 1 weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1100 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain TNC 335 B tool taper: SK40 table surface - upper: 1650 x 700 mm table face - lower: 1870 x 300 mm spindle speed:: 3000 Upm spindle motor: ca. 9 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal and vertical milling Position change of the head is done manually Vertical head with drilling quill, drilling depth 100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 3-40 mm drilling length: 500 mm lip angle: 15 - 75 ° total power requirement: 4,1 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,80x1,60x1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

drill diameter: 1,5 - 25 mm lip angle: 40 - 180 ° 6-jaw-chucks: various equipment: manual included: Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 20 mm -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

workpiece length: 610 mm work piece width: 180 mm workpiece height: 240 mm dia. of cup wheel: 200 mm table-size: Ø 280 mm spindle throat: 250 mm spindle speed:: 3000 U/min. voltage: 380 V total power requirement: 2,94 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 0,85 x 0,75 x 1,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 55 mm : M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg drive motor: 1,8/2,9 kW Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE ! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calcu ...