aty machine used for sale

Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg

li> TIG & MMA welding machine Functions: Hot TIG, Lift TIG, CLEAN & MMA Adjustable amperage: 40-190 amps Duty Cycle: 40% Duty Cycle equipped with: LED color display Includes: TIG torch Includes: MMA torch Connection: 220 volts Technology: IGBT Technology Including: manual Condition: unused, in the original packaging

Jaw width: 125 mm Reference: Schönichen - Lot 48

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price

Sheet metal bending machine with special dimensions: - Capacity 1050 x 1.5 mm - Roller diameter 55mm - Swing-out upper roller - Machine weight 180 kg Dimensions approx. 1.4 x 0.8 x 1.2 mm

Machine number: 22499 Boring depth: up to 180 mm Speed: from 25 to 3000 rpm Table dimensions: 400 x 300 mm with two grooves incl. matching workshop cabinet with matching accessories for the machine Training workshop part 2 - Lot 7

Spiral kneader Diosna W 240 A with 2 boilers Diosna spiral kneader W 240 A in good used condition with stainless steel spiral.The kneader is suitable for industrial and craft bakeries. The kneader and the boilers are driven by gear. -for max. 240 kg dough or for max. 150 kg flour -Stainless steel spiral kneader -digital control -Boiler inlet with pliers locking -with Siemens touch panel control -robust machine -more pictures and information on request -Shipping and trade-in on request -Machine can be viewed and tested in our warehouse

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

Keksmaschine gebrauchte

Sollas Bandum 25, untested, as spare part donor

In various versions, including 2x "Forza" HRc60, and "Weingarten" 150w200, on q pallet

not included the gas cylinder

unused

Equipped with original packaging

Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.

Grinding machine XXIII DH3 ready for use from site in actual condition

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated Input Strength: 29A; Rated input power: 19 KVA; Open-circuit voltage: 280V; Output current setting: 30-120A; Rated output voltage: 128V; Cyclic duty cycle: 60%; Efficiency: 80%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): Yes; Unused in box

SeriesNo. 90-272 Working range X: 600mm Z: 200mm Pendulum range X: 600mm Table speed: 1-28 m/MIN Dimensions magnetic clamping plate: 500x200 mm Working Area Y : 290mm Accessories: Coolant system 85L to 500L Belt filter system, Max Grinding Wheels Size: 225x20x51 Incl. assortment (pallet with grinding wheels)

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

4000 x 2000mm 6000w with auto pallet changer

Cables included.

Table dimensions: approx. 410 x 360 mm (inside ) with machine vice, jaw width: approx. 125 mm with swivelling work table Reference: Hansmann - Lot 34

Mass finishing machine complete with conveyor unit See pictures Tank outer diameter 1250 mm Container diameter/ container height 1000 / 350 mm Speed range 920 / 1415 rpm Operating voltage 380 V Volume 125 liters Drive power 1.9 kW Machine weight approx. 600 kg Dimensions L x W x H 1.4 x 0.9 x 1.5 m

Spiral kneader for 80 kg dough Dust cover stainless steel 2 drives (shell and dough hook separated) Mobile on wheels/ Weight 390 kg Exhibition machine therefore special price

SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK 1200 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 1200 mm

Tapping machine Thread diameter 3 - 10 mm Speed tool 120 - 600 rpm Table size 250 x 350 mm Projection 250 mm Operating voltage 380 V Thread length 80 mm Total power requirement 0.55 kW Machine weight approx. 0.35 t Space requirement approx. 0.7 x 0.7 x 1.9 m Condition: unchecked (6)

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

" Machine vice in solid cast design. • Jaw width: approx. 160 mm Product: Machine vise Manufacturer: unknown Type / Design: Machine vise, manual "

Microprocessor controlled MIG/MAG/MMA/TIG Lift inverter multi-process welding machine. Input voltage - 3PH 400V Mains frequency - 50/60 Hz Current range - 20-300A Maximum current - 300A @60% DC current - 205A Maximum no-load voltage - 63V Maximum current drawn - 15A Absorbed current at 60% - 10A Maximum power consumption - 9 kW Power consumption at 60% - 6.5 kW Power factor - 0.9

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

extra info see photo album with specifications

Copy Shaper / Copy Lathe Brand: Geiger Model: 8CD Milling + Grinding Workpiece length max. 1500mm

Bosch PKS vacuum packing machine for coffee Packed in 250 g and 500 g packages Year 1994 / renovated in 2017 Good working condition

Jaw width: 125 mm Vise length: approx. 470 mm Reference: Hansmann - Lot 24

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Manufacturer: Haeusler Type: VRM HY 4000 x 45 Stock number: 0973 Year of construction: 2001 Bending length: 4000 mm Bending strength: 45 mm Bending (cold): 38 mm Drive power: 100 kW Number of reels: 4 Adjustable rollers: 3 Type of adjustment of the rollers: hydraulic Top roll diameter: 710 mm Underroll diameter: 640 mm Side roller diameter: 520 mm Working speed: 2+4 m/min (up to 8m/min) Machine weight (with roller): 78 t Accessories Electronic synchronization Air-cooled oil cooler Upper support device Side cylinder support device (10t) Inlet table (20t) hydr. Bubble storage Cone bending device