atm used for sale

Manufacturer: ATM Type of Machine: Scrap Baler 40x40 Year of Manufacture: 2013 Find more here - / Contact us at -

Three-phase motor, electric motor, gear motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 480/310/H320 mm -Weight: 52 kg

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. The machine on offer is like new, it has never worked after a trial run. The machining process is performed on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSo ...

ATMOS PDS PDP 35 towable air compressor was built by ATMOS Chrást s.r.o. in the Czech Republic in 2021. The machine is used wherever top-quality compressed air is required. Its components from renowned European brands ensure the highest possible energy efficiency throughout its entire service life. The compact design based on a single-axle trailer, in turn, allows operation in all conditions, both at low and high temperatures. The ATMOS PDP 35 diesel air compressor weighs 768 kg. The machine has only been used for 350 hours and is in very good condition. At 250 operating hours a service was performed. Technical specifications of the ATMOS PDS PDP 35 rotary screw compressor - motor power: 35.7 kW - working pressure: 7 bar - maximum capacity: 5 m3/min - power source: combustion engine - operating hours: 350 h - weight of the ATMOS machine: 768 kg

Brand: ATMA Model: AT-80P Year of production:2003 For further details, you can reach out to us.

Height 1230 mm Width 980 mm Length 1330 mm Weight 820 kg Power supply: 400V 50Hz 3N Total power 31.1 kW Description Screw compressor Atmos SE 270, 400 V, 31.1 kW 8 bar 4.47 m3/min

General SKU293X474 LocationBarneveld MakeATML LifeSciences TypeMM-JTBB360 No.MM-JTBB360-0001 Year of construction2013 Main Features MaterialStainless steel Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With jacketcheck With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable Information Mounted on legscheck and wheels With switchgearcheck Weight250 kg CEcheck Floorspace1,50x1,0 m Total height1,36 m Extra SpecificationsWith disposable mix bags, volume 350 l.Stirring vesselsATMI LifeSciencesStirring vessels > Stirring vesselsBrand > ATMI LifeSciences What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

General SKU293X475 LocationBarneveld MakeATMI LifeSciences TypeMM-JTBB360 No.MM-JTBB360-0002 Year of construction2013 Main Features Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With jacketcheck With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable Information With switchgearcheck Weight250 kg CEcheck Mounted on legscheck and wheels Extra SpecificationsWith disposable mix bags, volume 350 l.Stirring vesselsATMI LifeSciencesStirring vessels > Stirring vesselsBrand > ATMI LifeSciences What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...

feed pressure:8 bar :Verd. 5050 min /1 voltage:400 V rated current:90 A total power requirement:46,5 kW weight of the machine ca.:1320 t dimensions of the machine ca.:1800 x 1600 x 2300 mm frequency:50 Hz Effizienz::7,4 m3/min IP::54 / 20

feed pressure:8 bar :Verd. 5050 min /1 voltage:400 V rated current:90 A total power requirement:46,5 kW weight of the machine ca.:1320 t dimensions of the machine ca.:1800 x 1600 x 2300 mm frequency:50 Hz Effizienz::7,4 m3/min IP::54 / 20

Overview  This atmospheric filler was manufactured by Borelli in 2016 and is in good and well-maintained condition. The machine is still installed and can be viewed and tested in person at any time. Technical details  Filling valves: 10 Filling principle: Atmospheric Bottle formats: 0.33L (0.75L possible if with 26mm crown cap) Closure: 26mm crown cap Output: 1,500 bottles/hour

Overview This filling monoblock was manufactured by MBF in 2001 and is designed for the filling of hot fruit juice (up to 95°C). The Synchrofil LV operates with an atmospheric (gravity) filling system and includes an integrated capping unit for aluminum screw caps (MCA standard). The machine is equipped with 35 filling valves and 4 rolling capping heads. It is adjusted for 1.0 L and 0.5 L VdF glass bottles with a diameter of 89.5 mm. The machine runs clockwise l-r and reaches a capacity of up to 7,000 bottles per hour. It is equipped with automatic speed control, CIP tank for automatic cleaning, and closure control systems. Technical Data manufacturer: MBF model: Synchrofil LV 1200-35 / 240-4V year of manufacture: 2001 condition: used filling system: atmospheric (gravity) filling temperature: up to 95°C number of filling valves: 35 number of capping heads: 4 (rolling heads) closure typ ...

Overview This Mondial LD 8-1 EAGLE/C atmospheric monoblock filling machine was manufactured by Italian manufacturer CIMEC in 2016. It is suitable for filling non-carbonated beverages such as beer with bottle fermentation, lemonade or soda and combines an 8-valve filling station with a single crown capping head. The filler is available immediately. Technical details  Output: 1,800 bottles/h Filling system: Atmospheric Application: Beer with bottle fermentation, still drinks Formats: Longneck 33cl Bottle diameter: 60 mm Bottle height: 227 mm Cap type: Crown cork 26 mm Output: 5 kW Compressed air requirement: 7 bar Dimensions (L×W×H): 165 × 140 × 240 cm

Overview  This monobloc filler for still water was manufactured in 2013 by the French company Gangloff-Scoma. The machine is designed for atmospheric filling of PET bottles ranging from 0.33 L to 2.5 L, currently configured for 1.5 L bottles with a 29/25 neck finish. The filler operates with a mechanical gravity filling system optimized for still water and can reach an output of up to 38,000 bottles per hour. It remains installed, in working condition, and is immediately available for inspection and use. Technical data  Application: Still water Filling System: Mechanical gravity (atmospheric) Capacity: Up to 38,000 bph Bottle Formats: 0.33 L – 2.5 L (currently set for 1.5 L) Neck Finish: 29/25

- Atmospheric pressure - Tanks for the fermentation and storage of wine or beer - Dome 400 mm stainless steel AISI 304 - Nitrogen connection with stainless steel ball valve 3/8" - Cleaning pipe with DIN 32 connection - Cleaning ball Ø 65 mm AISI 316 stainless steel - Level indicator with return flow into the tank - Taster - Bottom conical 30° - Residual drain butterfly valve DIN 25 - Clear drain butterfly valve DIN 25 - Bimetal thermometer in stainless steel -20 °C/+80 °C with 200 mm long shaft - 3 adjustable stainless steel feet - Dimensions: Ø 800 x 1950 mm (h) - Mirror polished inside, marbled outside

Metal bellows coupling ALMA ATMK 60-603036-25-30 shaft diameter: Ø 25 / 30 mm New ! Dimensions: Ø 70 x 80 mm

Serial number: X42252 Machine type: Injection Moulding Machine Clamp unit: 400T (Tonnage Group G0 400T–450T) Injection unit: 5600 Injection Specifications: - Screw Ø: 97 mm - Screw type: GP mixing for G - Intensification ratio: 9.42 - Max. shot weight (PS): 253 g - Injection capacity (cm³): 3394 - Injection rate: 550.4 cm³/s - Max. screw stroke: 450.2 mm - Max. hydraulic injection pressure: 170 bar - Specific injection pressure: 1600 bar Clamping Unit: - Tie bar spacing: 750 mm × 750 mm (H × V) - Mould height: 300 – 885 mm - Max. platen distance: 1605 mm - Location ring Ø: 175 mm - Location screw (MX): M20 - Core pulling: 2 sets Power Requirements: - Voltage: 400 V - Drive power: 124.3 kW - Heating wattage: 44 kW - Total power: 168.3 kW - Current requirement: [Not specified] Robot: ATM ES2000 Max. water heater temperature: 95 °C Machi ...

Serial number: X41520 Machine type: Injection Moulding Machine Clamp unit: 400T (Tonnage Group G0 400T–450T) Injection unit: 2500 Injection Specifications: - Screw Ø: 84 mm - Screw type: GP for GF - Intensification ratio: 9.7 - Max. shot weight (PS): 2018 g - Injection capacity (cm³): 2106 - Injection rate: 415.4 cm³/s - Max. screw stroke: 380.2 mm - Max. hydraulic injection pressure: 165 bar - Specific injection pressure: 1601 bar Clamping Unit: - Tie bar spacing: 865 mm × 865 mm (H × V) - Mould height: 500 – 1050 mm - Max. platen distance: 1770 mm - Location ring Ø: 160 mm - Location screw (MX): M20 - Core pulling: 2 sets Power Requirements: - Voltage: 380–400 V - Drive power: 166.4 kW - Heating wattage: 44 kW - Total power: 210.4 kW - Current requirement: 380 A Robot: ATM ES2000 Max. water heater temperature: 95 °C Machine dimens ...

Overview  The atmospheric filler was manufactured in 2016 by the Italian manufacturer GAI and used in a Belgian brewery. Technical details  Capacity: 6,000 bottles/h Formats 330 ml Number of valves: 16

-Manufacturer: Trotec - Model: Speedy100c-8063 -Date of manufacture: August 2022 -Serial number: S1-7145 -45 watts CO2 -230 V -50 Hz -with autofocus -with air conditioning - with 2.0" lens -with cutting table 12.7 mm -with performance upgrade -with X-axis with 2 carriages -Rulers in mm incl.: -Suction -Manufacturer: Aigner/Trotec -Model: 8401 Atmos Cube Speedy 230 V - Serial number: 01732-18928 -8247 Exhaust Connection Cable -Suction operating hours: approx. 1639h Shipping available on request. Sale only to tradespeople.

Overview  This atmospheric filling monoblock with crown capper was manufactured in 2017 by Spain Cespedes. The machine is designed for bottling beer or other non‑carbonated beverages in 330 ml glass bottles. The equipment combines a gravity filling system with an integrated crown capping unit. The machine is in good condition and is currently not in use. It is being sold due to an upgrade to a higher‑capacity model from the same manufacturer. Technical data  Capacity: approx. 900 – 1,200 bottles/hour Formats: 330 ml glass bottles Application: Bottling of beer or other non‑carbonated beverages Configuration: 8 gravity filling valves, 1 crown capping head Neck finish: Crown cap Ø26 mm Utilities: 400 V / 50 Hz Dimensions: approx. 2,260 x 850 x 2,250 mm Weight: approx. 900 kg

Overview  This atmospheric semi-automatic can filler from the brand Cask, 2019, is for sale because the owner is closing the business. It is still operational and can be inspected in person. Technical Details  600 cans/hour 2 filling heads CO₂ pre-purge Canning table Formats Slim 163 mL 187 mL 250 mL Sleek 250 mL 355 mL Standard 250 mL 330 mL 355 mL 375 mL 440 mL 473 mL 500 mL Dimensions Length [mm]: 1530 Height [mm]: 2008 Depth [mm]: 646 Power supply: 240 VAC, 50 Hz Scope of delivery includes FIAC SUPER SILENT 59 air compressor (required for lid sealer), 8 bar

Machine type: Filling machine (rotary) Manufacturer: ATM GROUP Model: PAC 9.0 -20/P Year: 2016 Serial number: 316/2016 Control: SIEMENS SIMATIC HMI Application: Filling of pâtés and meat stuffings Filling system: Volumetric dosing Technical data: - Dose range: 50 – 200 ml - Product temperature: up to 60 °C - Output: approx. 6,000 – 10,000 cups/h - Packaging type: Aluminium cups Ø 83 mm (suitable for sterilisation) Machine configuration: - Rotary indexing table - Multi-head dosing station - Product hopper (stainless steel) - Cup feeding / handling system - Conveyor / transfer section - Safety enclosure with access doors - Integrated control cabinet with HMI Remarks: Stainless steel construction suitable for food industry. Condition used. Own mass: approx. 2,400 kg Dimensions (LxWxH): approx. 2,721 x 2,248 x 2,250 mm Auction-ID: A7-40551-1 ...

Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: Automatic valve opening/closing Centralized fill-level adjustment (±50 mm) Maintenance-free lifting cylinders Au ...

Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible.

Auction-ID: A7-44236-909

Detached, Show model Auction-ID: A1-40103-19

Auction-ID: A1-45422-22

Equipped with: lighting, support legs, Auction-ID: A1-40133-160

(55ml/h at 1.38 bar) combined with CO2 is able to generate an almost imperceptible mist while maintaining the transparency of the scenography. Includes flight case and pressure gauge. Auction-ID: A1-45485-17

Overview This Gravity Filler for Cans was manufactured in 2022 by Italian company Emma. The machine has never been used and is immediately available. It is designed for small-scale can filling, particularly suited for 15 cl and 25 cl slim cans, with manual loading and a production speed of up to approx. 600 cans per hour. Technical data Capacity: approx. 600 cans/h Formats: 15 cl slim, 25 cl slim Dimensions: L.1480 mm x W.850 mm x H.1800 mm (max. 3000 mm) Weight: 350 kg Power: 0.8 kW Air consumption: 190 Nl/min Operating pressure: 6 bar, dry and non-lubricated air Voltage: 220 V (Single-phase) Frequency: 50 Hz Auxiliary voltage: 24 V DC Ambient temperature: 2 °C to 40 °C

Brevetti ATM 15 duplex (2 x modules) automatic inspection machine for syringes, currently set for 10.85mm diameter syringes (long and short needle), output up to 133/minute per module (266 per minute total). Each module is fitted with 6 control stations for presence of bung, reflective particles, fill height and bung position, needle cover, non-reflective particles, plus turbidity meter. Each module has 3 reject channels plus pass. One module is ATM15 SX year 2008, the second is ATM15 DX year 2007. Both units operate from one control panel.

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Absolute rotary encoders, encoders, rotary encoders, encoders, absolute rotary encoders, absolute encoders -Manufacturer: Sick/Hausmann, Absolute Encoder -Type: ATM60-A4AO-K08 ID no. 1032969 -Voltage: 10-32 VDC -Shaft: Ø 10 x 20 mm -Price: per piece -Number: 4 piece -Dimension box: 135/110/H90 mm -Weight: 0.4 kg/piece

cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pocket filter with mechanical cleaning. - Filter bag with approx. 3m² filter area - Suction fan with silencer 1.1 kW up to 2000m³/h - Dust collection hopper with dust collection bucket - Filter control with plug - Can be used up to max. 10 m suction line - Year of construction 2024 (was only in operation for a short time for testing) - Food safe - Complete documentation available

Furnacce 1200 hardness tester 300x300x500 mm Temperature max 1200C Ölbrenneranlagen Retortenöfen Teil Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen Tunnelofen Haubenofen Schachtofen Sonderanlagen Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmaschinen Drehherdöfen Doppelkammeröfen buerstlein Draht Glühöfen Durchlauföfen zirlguss Elevatoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herd ...

Giusti preparator 75 litres Year of manufacture: 1996 Capacity: 75 litres INNER BAR: Max. PR: ATMOS Min. PR: ATMOS Test pression: water fill Working pression: ATMOS Design temperature: 150 °C JACKET BAR: Max. PR: 3.3 Min. PR: ATMOS Test pression: 5.0 Working pression: 3.0 Design temperature: 150 °C

Preparation vessel for liquids 75L Giusti Capacity: 75 litres Maximum internal pressure: atmospheric Maximum external pressure: 3. 3 Minimum internal pressure: atmospheric Minimum external pressure: atmospheric Internal pressure test: water filling External pressure test: 5. 0 Internal working pressure: atmospheric External working pressure: 3. 0 Internal and external temperature: 150 °C

Kiln 1200C inner dimensions 1x1x2m 2 heating zones auto door Fours pour la fonderie Fours pour la forge et le matriçage Fours pour les traitements thermiques Equipements périphériques Fours pour verres feuilletés Fours Basse température Fours à passage continu Fours céramique Fours à creuset pour fusion et fusion-maintien des métaux non ferreux Creusets pour fonderie Fours pour cuisson et décirage de carapaces de fonderie à cire perdue Fours de forge standard Fours à creuset Fours Haute température Fours de laboratoire Fours de trempe Fours de recuit chauffé à l'électricité chauffé au gaz four standard chauffés à l'électricité four standard chauffés au gaz Fours à longerons mobiles Fours de thermoformage Fours de séchage Fours de polymérisation Fours pour le verre Fours Fours à sole tournante de bombage Fours de revenu  ...

oven 650 Injection Mould Mold furnace temperature range 10 - 650 Celsius 1x1x1m (various possible) Kammertrockenöfen Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen temperaturi te polaganim hlanenjem. Na ovoj povišenoj temperaturi u materijalu nastaju plastične deformacije te se unutarnja naprezanja izjednačuju. Nitriranje je postupak sličan je cemetiranju, gdje se površina dovodi u kontakt sa strujom dušika koji se veže sa željezom te tvori vrlo tvrde kristale željeznog nitrida (Fe4N). Ovako dobiveni površinski sloj vrlo je tvrd i otporan na trošenje. Nitriranjem se povečava dinamička čvrstoćai otpornost prema  ...

Stainless steel reactor of the brand AXOMATIC model FUS20. Year 2013. The AXOMATIC FUS20 reactor is an AISI 316 stainless steel reactor with a total capacity of 25 liters, designed for mixing, heating and reaction processes in laboratory, pilot plant and small-scale production applications in the chemical, pharmaceutical, cosmetic and food sectors. Capabilities Total body volume: 25 liters Minimum working volume: 6 litres Stirring System The reactor is equipped with a double stirring system, which allows great process versatility: Pallet Rack Agitator Speed: 5 – 40 rpm Motor power: 0.37 kW Cowles type agitator (high speed) Speed: 200 – 1,000 rpm Engine power: 0.56 kW This combination allows working with both viscous products and processes that require high shear. Construction Materials Product contact parts: AISI 316 stainless steel Shirt:  ...

2020 Viscotec Semi-automatic syringe filling system for dronabinol. The filling system is equipped with a storage container for heating the dronabinol to 60 – 70° C and keeping the Temperature constant during the filling process. The syringe is filled through the syringe tip and under a protective gas atmosphere (e.g. argon). No air should remain in the syringe. The filling system is suitable for the filling amounts of 265 mg, 530 mg or 1060 mg with tight tolerance limits. The dosing accuracy of the Pharma Dispenser 3VHD8 (0.35ml / U) amounts 1%. The repeat accuracy is > 99%, depending on the material. Detailed material data are currently not available. The determination of the actual dosing accuracy and dosing time takes place during commissioning. The customer is taking care of the process development. The storage container has a capacity of 500 ml and withstands a pressure of 0  ...

Semiautomatic tray sealer for modified atmosphere packaging. Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version for handling 2 trays, (at extra charge handling of 4 or 6 trays per cycle possible) | chamber size: L450xW(200-600)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cyc ...

Automatic tray sealer incl. gas flushing module for modified atmosphere packaging (MAP). Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version | chamber size: L550xW(200-600)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cycles/min (sealing only) or 5 cycles/min (vacuum/protectiv ...

Semiautomatic tray sealer for modified atmosphere packaging. Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version for handling 2 trays, (at extra charge handling of 4 or 6 trays per cycle possible) | chamber size: L350xW(100-400)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cyc ...

Semiautomatic tray sealer for modified atmosphere packaging. Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version for handling 2 trays, (at extra charge handling of 4 or 6 trays per cycle possible) | chamber size: L450xW(200-400)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cyc ...

Automatic tray sealer incl. gas flushing module for modified atmosphere packaging (MAP). Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version | chamber size: L450xW(200-400)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cycles/min (sealing only) or 5 cycles/min (vacuum/protectiv ...

Automatic tray sealer incl. gas flushing module for modified atmosphere packaging (MAP). Before sealing the tray with foil, a gas flushing device replace the current atmosphere inside the tray by a gas mixture and/or vacuum. The packaging machine can be equipped with a skin vacuum module (at a surcharge). The AMTEC tray sealer is particularly interesting for products from the food industry, as the modified atmosphere ensures that the food remains fresh and has a longer shelf life. Ribbon printer for BBD or batch number included in the price. PLC from OMRON, touch screen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version | chamber size: L350xW(100-400)mm, multi-tray processing possible within the range (at a surcharge) | max. cycle of the machine in neutral: 12 cycles/min (sealing only) or 5 cycles/min (vacuum/protectiv ...

Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...