atlas copco ga used for sale

Key data: 73 , 3

Screw compressor, 500 V drive, serviced

Oil/Condensate Separator

Key data: 160 , 8 , 1170

For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037

Key data: 250 , 8 , 2322

For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg

Cooler, heat exchanger ATLAS COPCO 1617-0004-00 0653.725.0000 0653.731.2100 pmax.: 10.57 bar connections: Ø 20 / 80 mm Flanges: Ø 200 mm, 100 x 100 mm fittings: Ø 32 mm radiator made of aluminium !' used, tested ! Dimensions: 1050 x 500 x 1030 mm

Atlas Copco ZT30 Air compressor Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible.

Soundproof diesel generator from Atlas-Copco Engine Type: Doosan P158LE PRP power: 410 kVA LTP power: 470 kVA Speed: 1500 1/min Generator: Mecc Old ECO40-2S Voltage: 400/231 V Frequency: 50 Hz Subject to prior sale - errors possible! Internal reference number: E-1004-100

Second hand oil-free Atlas Copco ZR132. 132 kW with 7.5 bar and 19.10 m3/min. Water-cooled. Built in 2010 with around 39,000 hours.

Manufacturer: Atlas Copco Model: ZE 4 VSD (51 psi) with aftercooler Type of Machine : air compressor Temperature at max operating pressure: 40 °C Nominal pressure levels: 2.25 – 3.5 bar(e) Max. effective operating pressure: 2.25 – 3.5 bar(e) Min. effective operating pressure: 1.05 – 3.0 bar(e) Max. motor speed: 1200 U/min Electrical power consumption: 214.8 – 254.1 kW Air outlet temperature at max load: 40°C Required oil volume: 55 L Sound pressure level: 82 dB(A) Find more here - / Contact us at -

Key data: 48 KW, 60 kVA

We currently offer: No. 008 Atlas Copco generator set Type: QAS60 Engine Perkins 3910/1500 Power 60 KVA / 48 KW Generator LeRoy Somer Hz 50 RPM 1500 IP 23 AVR control R250 Year of construction 2013 dB 87 Connection: 16A, 32A, 63A, socket Operating hours 19532 Metrics L: 2.80m W: 1.15m H: 1.75m Weight: 2130 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Tested Atlas Copco ZR160VSDFF oil-free screw compressor. 160 kW Year of manufacture 2018 Only 27889 hours. Full service history. drum dryer integrated. Frequency-controlled.

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.

Brand: Atlas Compo Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198kg. Assets: 5.5 kW Sound level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0- 10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm State machine: Very good Electrical connection: 3 phase Missing parts: No Photos/film available: Photos available 10.2.192

General SKU398U1172 MakeAtlas Copc TypeGV 200 Mach.No.1300515 Year of construction2013 Pressure Working pressure0.0005 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume205000 Ltr. Motor5.5 KW Specified Features - Vacuum pump PumpHigh vacuum, oil seal rotary vacuum pump Number of pumps:1 Capacity205 m³/h With motor5,5 kW MaterialMild steel With jacketcheck General LocationBarneveld Floorspace0,47x0,33 m Total height0,65 m Weight155 kg CEcheck Extra SpecificationsUNUSEDVacuum pumpsAtlas CopcoPumps > Vacuum pumpsBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

feed pressure: 8,5 bar liter capacity: . l total power requirement: 454 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A small compressor system including separator and dryer is available. 1) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 2) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 3) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

Operating hours 58730 h Technical data: Max. compressed air: 14 bar Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Key data: 22 , 8 , 2

Atlas Copco SF22+ Compressor Atlas Copco CD45+ Dryer Sold as a set. Oil-free air compressor Pressure: 8 bar Flow rate: 2.4 m³/min Power: 22 kW Weight: 687 kg Year of construction: 2024 As good as new Unused device All employees speak Dutch, German and English Prices plus VAT Shipping available for an extra charge (Subject to changes and errors in technical data, information and prices as well as prior sale)

Second Hand Compressed Air Refrigeration Dryer FD1750+ 400V/50 Hz 14.00 bar 105.00 m³/min Year of manufacture 2018

feed pressure: 11 bar Power: 11 KW Receiver: 500 L Control: AtlasCopco EL liter capacity: 1,38 m³/min dimensions of the machine ca.: - m weight of the machine ca.: 330 kg The Atlas Copco GX11FF EL (Full Feature, Extended/Electronic) is an oil-injected screw compressor with a rated power of 11 kW (15 hp), designed for continuous industrial use. The ‘Full Feature’ version features an integrated refrigeration dryer that provides dry compressed air straight from the factory. Delivery volume (FAD): approx. 1,446 l/min for the 10 bar version or approx. 60 CFM. Tank capacity: mounted on a 500 litre tank. Noise level: relatively quiet at approx. 67–69 dB(A) thanks to soundproofing hood. - Integrated dryer (FF): The refrigeration dryer prevents condensation from forming in the pipes and protects downstream tools. - Electronic control: The ‘EL’ models often feature a more advanced c ...

General SKU221Y089 MakeAtlas Copco SerialITJ475307 TypeG7 FF Pressure Pressure buildup10 Bar Main Features Capacity0.98 m3/Min Motor7.5 KW Pressure10 Bar Specified Features - Blower Capacity0,98 m³/min With jacketcheck General Year of construction2021 LocationBarneveld Weight250 kg CEcheck Extra SpecificationsOil-injected rotary screw air compressor with integrated refrigerant dryer:&:nbsp:Refrigerant type: R513A:&:nbsp:Max inlet temperature: 46 °C,&:nbsp:Max ambient temperature: 46 °C,&:nbsp:FAD capacity: 16.4 l/s = 59.0 m³/h = 34.7 cfm,&:nbsp:Duty: Continuous operation / 24-7 useBlowersAtlas CopcoBlowers > BlowersBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Plea ...

Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar 14.70 m3/min

Atlas-Copco 1500 liter tank pressure vessel

Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Oil-free screw compressor Atlas Copco ZT22 22 kW 10 bar 2.72 m3/min Year of Make: 2006 Hours: 54,650

Atlas Copco ZR160VSD oil-free screw compressor Inverter integrated. 160 kW 10.40 bar 25.90 m3/min Year of Make: 2008 Hours: 54,511

Oil-free screw compressor Atlas Copco ZR75FF Dryer integrated 75 kW 8.35 bar 11 m3/min Year of Make: 2004 Hours: 44,153

Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023 Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Manufacturer: Atlas Copco Model: QAS200 Year of Manufacture: 2011 Type of Machine : Emergency Power Generator Operating hours : 242 h Find more here - / Contact us at -

Used Atlas Copco FD285 Refrigeration Dryer 17.10 m3/min 14 bar Year of Make: 2016

Used Atlas Copco FD220VSD-G Refrigeration Dryer - Premium 13.20 m3/min 14 bar Year of manufacture: 2023 Hours: 10,626

Screw compressor Atlas Copco GR110 110 kW 20 bar 12.60 m3/min Year of Make: 2001 Hours: 44,098

Screw compressor Atlas Copco GR110 110 kW 20 bar 12.60 m3/min Year of Make: 2004 Cjbqey Nl Rmo Da Srwegt Operating hours: 64,326

A hydraulic system, consisting of three identical power units and three identical hydraulic hammers including lines, is available. 1) 3x hydraulic power unit Atlas Copco LP 9-20 P, engine manufacturer: Honda, engine power: 6.7kW, fuel: gasoline, max. operating pressure: 150bar, return filter fineness: 25µm, machine dimensions X/Y/Z: approx. 650mm/550mm/650mm, weight: approx. 80kg. 2) 3x hydraulic, vibration-damped breakers Atlas Copco LH 190 E, year of manufacture: 2014, operating pressure range: 95bar-110bar, blow frequency: 1400/min, vibration value: approx. 5m/s², max. back pressure: 10bar, length: approx. 650mm, operating weight: 25kg. 3) Hydraulic hose lines. An on-site inspection is possible.

Atlas Copco A-66 CLL crawler drilling rig with center fifth wheel on crawler undercarriage, pump foaming agent, double clamp Ø 310 with hydraulic piston puller 20 ton, mast with useful stroke 12.00 m, torque 1300 kgm, 6 cyl Deutz diesel engine. 106 HP

Specifications Brand: Atlas Copco Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198 kg. Assets: 5.5 kW Noise level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0-10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm Machine status: Very good Electrical connection: 3 phase Missing parts: No Photos/video available: Photos available 10.2.192

Atlan Copco compressor trailer - model XAS 76 Dd, including Swiss papers, complete operating instructions and spare parts list, Technical specifications:, - Volume flow:4.2 m³/min, - Dead weight:920 kg, - Engine power:30 kW, - max. pressure:7 bar, - Energy source:diesel

Oil-free scroll compressor with integrated refrigeration dryer., Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1,12 m³/min, Volume flow at 4 bar: 1,16 m³/min , Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled

Used PET Bottling Line for Still Water Up to 30000 bph Introduction to the Bottling Line The Used PET bottling Line for still water, has been specifically designed for still water with a maximum capacity of 30,000 bottles per hour (bph). Although currently assembled, the Used PET bottling Line for still water has ceased production at the end of this month but retains its integrity and potential for future reactivation. Configuration and Components of the Used PET bottling Line for still water Several machines work in synergy to form an optimal process at the heart of the Used PET bottling Line for still water. Firstly, the Blow Molding Machine from Sidel, model SBO 20 5270, commissioned in 2001, is crucial for forming PET bottles ranging in formats from 0.33 L to 1.5 L. It is important to note that the molds are not included in the line. Compressor and Quality Control of the Used PET Bot ...

Used Atlas Copco FD310 Refrigeration Dryer 6.48 m3/min 14 bar Year of construction 2021

Atlas Copco air compressor with oil unit, type: GA22VSD+FF, serial number: AP1839586, year of construction: 2019, 400 V, 3 Ph, 50 Hz, 30 Hp, 22 kW, 12.75 bar, 4.5m³/min, 5700 r/min, working hours: 55952, dimensions: 1350 mm x 800 mm x 1600 mm. Oil unit dimensions: 1050 mm x 650 mm x 880 mm.

Oil-free screw compressor ZT250FF dryer integrated. 250 kW 10 bar 42.31 m3/min Year of Make: 2012 Hours: 19,221

The following are offered: 3x Kaeser compressors, 1x Gieb compressor, 1x Atlas Copco compressor and 1x Maschinen- und Behälterbau pressure vessel. 1) Gieb compressor, 750/250-11, year of manufacture: 2005, max. operating pressure: 11bar, intake capacity: 750l/min, power requirement: 4.0kW. 2) 3x Kaeser EPC 630-150 compressors, year of manufacture: 1995, max. operating pressure: 10bar, displacement: 630l/min, motor power: 3.0kW. 3) Atlas Copco LT compressor with sound enclosure, operating pressure: 15bar. 6) Maschinen- und Behälterbau pressure vessel, volume: 350l, year of manufacture: 1997, max. operating pressure: 16bar, temperature range: -10°C to +50°C. An on-site inspection is possible.

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1988 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...

Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1978 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...

Masterwood Italy CNC Ventilation Center for Door and Window Production Type Woodmaster ATLAS Built in 2000 SN 00120018 for the processing of solid wood and panel material, etc. Working strokes of the axles: X Axis 3900mm Y Axis 1785mm Z- Axis 630mm Workspace X Axis 3500mm Y Axis 1210mm Z- Axis 210mm Max speed of axles 60-50-20m/min 6 edition consoles Workpiece clamping device Electric main spindle with ISO 30 intake 6.8 kW 24,000rpm Saw unit integrated in the work unit Automatic change of tools 18 positions Numerical control SINCRO with industrial PC and keyboard Safety tread mats Vaccum Pump Total required power 27 Kw Care pressure 6-7 atm Compressed air consumption per arebit cycle 200-300Nl/min Suction speed 25-30m/sec Air consumption 5000m3/h 400 V/ 50 Hz Weight 4500 Kg Technical information subject to reservation