atlas copco dgd used for sale

Power: 109 kW Capacity:11,76 m3 / min Pressure: 20 bar Year of manufacture: 1995

Package 5 pcs - great price to be negotiated

Atlas Copco used machine power: 90 kW volume flow: 17,59 m3/min pressure: 12,75 bar 2013 year

With built in compressed air refrigerant dryer. Refrigerant R404a. According to previous owner compressor has about 22000 working hours only.

A screw compressor system Atlas Copco is offered, Used Ready for immediate deployment! 100% oil-free compressed air; Reduced energy costs; Applicable in: Pharmaceutical industry food and beverage industry; electronics industry; Medical and Healthcare If you have any further questions, please do not hesitate to contact us.

USED COMPRESSOR technical data power: 120 kW performance 19,4 m3/min. pressure 8,3 bar, year of production 2011 S011064

Power: 0 kW Working pressure maximum: 0 bar Tank volume: 0 l Capacity (l/s): 0 l/s Type: 0   Operating hours: 32239 Technical data Max. Pressure: 10 bar Quantity delivered: 36.8 l/s Execution: Screw compressor motor speeds number: 1 up to: 3000 rpm Installed power: 15 kW Machine´s weight about: 460 kg Overall dimensions machine: Length: 1200 mm Width: 650 mm Height: 1400 mm

USED COMPRESSOR technical data power: 18,5 kW performance 3,6 m3/min. pressure 12,8 bar, year of production 2010 S010887

ATLAS COPCO 2908850800 ORIGINAL ROTO-H/PLUS 209L.

ATLAS COPCO 2908850800 ORIGINAL ROTO-H/PLUS 2 barrels of 209L each. approx. 10 years old

ATLAS COPCO 2908850800 ORIGINAL ROTO-H/PLUS 2 canisters á 20 L. approx. 10 years old

Stroke: 750 mm Make Atlas shaping Type W 7 Year shaping / kurzhobel hobel maschine Stroke = 750 mm X / Y = 490 x 500 Stroke tool holder = 175 Head rotation + / - 60 Gr.- Table = 560 x 480 - Speed 12 - 132 M/min

Variable speed drive. Volume flow 4.7 - 27.10 m3/min. at 7.0 bar.

PROD. ATLASCOPCO TYP GA200 FF S/N APF225598 year 2018 (kW) 218 (m3/min) 36.1 (bar) 8.3

Hydraulic lifting crane with two supporter feet, and a turntable Splited telescopic cranehand, without hydraulic power supply. Manufacturer: ATLAS Load Capacity: 2,0 t Horizontal Reach: 6,0 m Reach height: 5,0 m

Variable speed drive. Volume flow 12.4 - 50.5 m3/min. at 7.0 bar. With built-in compressed air refrigerant dryer. Refrigerant R 404a. Air end 1x replaced.

feed pressure: 8 bar liter capacity: l total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter DDX 40 Part number: 2901121100

Screw compressor make ATLAS COPCO type GA 310 PACKSer. -No: ABP718625Technical specifications:Output: 4.3 m3 / minMax. Performance: 10 barSpeed: 2925 rpm.Power: 30 kWWith- water separator- Flair / Delair DDA 24 dryer- Running time 44711 hoursused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Filter PDx 40 Part number: 2901086400

PROD. ATLASCOPCO TYP G110 8.5 CE 400/50 IE3 S/N WUX411079 ROK 2015 MOC (kW) 113 WYDAJ. (m3/min) 18.8 CIS (bar) 8.5

PROD. ATLASCOPCO TYP GA90 S/N API621343 ROK 2015 MOC (kW) 90 WYDAJ. (m3/min) 16,48 CIS (bar) 8,5

Vacuum Pump ATLAS COPCO Model. GHS350VSD+.

COMPRESSOR BRAND: ATLAS COPCO TYPE: GA 808 PACK PRESSURE: 8 BAR ENGINE 75 KW, BRAND: SIMENS.

Description Atlas Copco GA 90 VSD Screw compressor, speed-controlled WorkPlace Full-feature-(D)version, with water cooling Motor power 90 kW Drive motor IP 55, insulation class F high-efficiency gearbox Frequency converter max. operating overpressure 4-13 bar Volume flow 32-287 l/s GA 90 VSD Oil-water separator OSD 110 electronic condensate drain EWD boiler 3000 liters

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

116.3 m3/hour 68.4 cfm Max output: 9,75 bar voltage: 400V Volume flow rate: 32,3 liter/sec Length: 1267 mm Width: 790 mm Height: 1590 mm Weight: 343 kg

Pressure power: 10 bar Pressure power: 150 l/min. tank: 150 l cylinder: St. With tank from Boge 150 litersThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A compressor is sold that has been discarded because of a new purchase. Diesel mode Volume flow 51 l/s Nominal pressure 6 bar Rated speed 2400 1/min Engine power 25Kw Dimensions: ca 1,8m1,1m1,2m high Weight approx. 900kg

COMPRESSOR OIL FREE 90 KW ZT 110 KW ZT 7.5 BAR DRYER FD 560

Screwcompressor with variable speed (n-drive) max 13 bar max 153 liter/sec - 9 m3/min 50 kW ElektronikonII control Weight: 1132 kg

Machine number: 2022-565 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers Specifications: producenter:Atlas Copco Condition: ( very good ) Model : QAS150 Condition: ( very good ) Engine : Volvo Penta 6cylinder Terbo diesel water-cooled. Power : kw/120/KVA 150 RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Operating hours : approx. 10400h Year built:2007 Shuro - CEE 16 A 1× 400 V - CEE 32 A 1× 400 V - CEE 63 A 1× 400 V - CEE 125A2 400v -Precaution - Length 3.35mm - Width 1.20 mm - Height 1,70 mm/2500Kg - Complete with control Incl. diesel tank in the base frame Immediately ready for use Delivery nationwide possible for an extra charge Adam Power Systems GmbH Power generator of all kinds Werkstraße 16, 24848 Kropp

Servocontroler ATLAS COPCO QCS 340 15 ( QCS34015 ) 4240 0329 81 regenerated ! Dimensions: 230 x 240 x 45 mm

Servocontroler ATLAS COPCO QCS 340 15 ( QCS34015 ) 4240 0329 80 Dimensions: 310 x 240 x 45 mm

Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1 m³/min , Volume flow at 4 bar: 1 m³/min, Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled

Water separator ATLAS COPCO WSD 750 1613-6728-00 PB 20 TB 70 Volume: 8.6 l used, tested ! Dimensions 600 x 210 x 200 mm

Electric screwdriver, servo screwdriver, with torque adjustment ATLAS COPCO QMR42-25-RT Tool holder: 3/8 R SERVO MOTOR: BSM 2260C-R4.3 4230 1704 81 speed: max. 7000 rpm voltage: 22 V at 1000 rpm QRT38050 4230161380 New ! Dimensions: 590 x 120 x 45 mm

Air branch block, porting block kit, 2 pieces ATLAS COPCO MIDI OPTIMIZER 9093 0022 03 operating pressure: 0 - 16 bar connections: 1/2 new ! Dimensions ( single air branch block ): 63 x 63 x 68 mm Dimensions ( packaging ): 160 x 140 x 70 mm

Screw compressor Manafacture: Atlas Copco Type: GA15 VSD FF Year of construction: 2022 Operating hours: approx. 4,400 Weight: 280 kg Pressure vessels on request

year: 2015 max. working pressure: 42 bar rated power: 37 kW rotational shaft speed: 401 r/min. Keeping your production up and running 24/24 Designed for industrial service 24/24, Atlas Copco DX/DN compressors work reliably at all times without the need for constant supervision. Their sturdy design leads to extremely low vibration levels. Proof of their reliability can be found in the thousands of machines installed in the field, where they provide a smooth and reliable supply of air or nitrogen. Protecting your process with oil-free technology Oil-free compression safeguards the quality of the compressed air and nitrogen. In most applications, even the slightest pollution is unacceptable and could lead to high risks for your production. Atlas Copco supplies the highest quality of air and nitrogen with boosters certified to Class 0 according to ISO 8573-1.

PROD. ATLASCOPCO TYP GA11VSDFF PLUS S/N API271305 YEAR 2020 POWER (kW) 11 EFFICIENCY. (m3/min) 1,9 PRESSURE (bar) 12.75 INVENTER YES DRYER YES

PROD. ATLASCOPCO TYP GA11VSDFF PLUS S/N API269757 YEAR 2019 POWER kW) 11 EFFICIENCY. (m3/min) 1,9 PRESSURE (bar) 12.75 HOURS(DOC/OGÓL) 18665 INVERTER YES DRYER YES

Manufacturer: Atlas Copco, Type: GA 45, Year: 1991, Volume flow m³/min: 5,94, Drive power kW: 45, Drying unit: yes, Compressed air min/max bar: 10, Year :1991

Radiator, heat exchanger ATLAS COPCO 1617-0004-00 0653.725.0000 0653.731.2100 pmax.: 10.57 bar Connections: Ø 20 / 80 mm Flanges: Ø 200 mm, 100 x 100 mm Fittings: Ø 32 mm Radiator made of aluminum used, tested ! Dimensions: 1050 x 500 x 1030 mm

Manufacturer: Atlas Copco, Type: GA 55, Year: 1991, Control: Atlas Copco, Schraubenkompressor: yes, Running idle houres: 69200, Volume flow m³/min: 7,5, Verdichtungsenddruck bar 1: 12, Hauptläuferdrehzahl U/min 1: 2850, Antriebsleistung kW 1: 55, Year :1991

Year of construction 2014, 30 kvA, nominal voltage: 400 V, nominal current: 43.3 A, on a single axle chassis with articulated drawbar and overrun brake, 1100 kg dead weight

PROD. ATLASCOPCO TYPE GA30 S/N API324380 YEAR 2013 POWER (kW) 30 PUMP (m3/min) 5.18 CIS (bar) 8.5

Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg

Backhoe bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Admission intermediate dimension: 255/200 mm -Bore: Ø 45/50 mm -Ripper teeth -The mounting on the spoon can be changed by us at an additional cost -Own weight: 160 kg

Backhoe bucket, excavator bucket, demolition bucket -Execution: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Admission intermediate dimension: 160 mm -Bore distance: 220 mm -Bore: Ø 45 mm -extended cutting edge -The mounting on the spoon can be changed by us at an additional cost -Own weight: 130 kg