129,001 used machines on RESALE, but how to find them? Machine Search
Oil-free scroll compressor with integrated refrigeration dryer., Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1,12 m³/min, Volume flow at 4 bar: 1,16 m³/min , Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled
Screw compressor Atlas Copco GA30FF dryer integrated. 30 kW 9.75 bar 4.79 m3/min Year of Make: 2017 Hours: 5,425
Atlas Copco GA11VSD+ screw compressor Inverter integrated 11 kW 13 bar 1.95 m3/min Year of Make: 2013 Hours: 20,453
Screw Air Compressor Atlas Copco GA55+FF Dryer integrated 55 kW 8.20 bar 10.44 m3/min Year of Make: 2012 Engine hours: 29,610
Used PET Bottling Line for Still Water Up to 30000 bph Introduction to the Bottling Line The Used PET bottling Line for still water, has been specifically designed for still water with a maximum capacity of 30,000 bottles per hour (bph). Although currently assembled, the Used PET bottling Line for still water has ceased production at the end of this month but retains its integrity and potential for future reactivation. Configuration and Components of the Used PET bottling Line for still water Several machines work in synergy to form an optimal process at the heart of the Used PET bottling Line for still water. Firstly, the Blow Molding Machine from Sidel, model SBO 20 5270, commissioned in 2001, is crucial for forming PET bottles ranging in formats from 0.33 L to 1.5 L. It is important to note that the molds are not included in the line. Compressor and Quality Control of the Used PET Bot ...
Overview This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery Compressor | Atl ...
Overview This low-pressure air compressor was manufactured in 2012 by the Swedish company Atlas Copco. The GA132 VSD model delivers up to 24.1 m³/min at a maximum pressure of 8.5 bar. The unit was fully reconditioned in 2025, including the installation of a new HMI, and is in excellent working condition. It remains installed and connected, can be inspected on-site, and is immediately available. Spare parts are included, and an Atlas Copco air dryer can be supplied optionally. Technical data Operating Pressure: 7–8.5 bar Air Capacity: 24.1 m³/min Power Supply: 132 kW Weight: 4,075 kg Condition: Fully reconditioned in 2025 (new HMI) Additional equipment: Optional Atlas Copco air dryer Status: Installed and connected, fully functional Availability: Immediate
used
<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately
used
1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM
used
<br><br><br>Still in operation: Yes<br>Available: immediately
Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1988 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...
Masterwood Italy CNC Ventilation Center for Door and Window Production Type Woodmaster ATLAS Built in 2000 SN 00120018 for the processing of solid wood and panel material, etc. Working strokes of the axles: X Axis 3900mm Y Axis 1785mm Z- Axis 630mm Workspace X Axis 3500mm Y Axis 1210mm Z- Axis 210mm Max speed of axles 60-50-20m/min 6 edition consoles Workpiece clamping device Electric main spindle with ISO 30 intake 6.8 kW 24,000rpm Saw unit integrated in the work unit Automatic change of tools 18 positions Numerical control SINCRO with industrial PC and keyboard Safety tread mats Vaccum Pump Total required power 27 Kw Care pressure 6-7 atm Compressed air consumption per arebit cycle 200-300Nl/min Suction speed 25-30m/sec Air consumption 5000m3/h 400 V/ 50 Hz Weight 4500 Kg Technical information subject to reservation
Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1978 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...
Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg
We offer used as it is where it is: SUNTEST XXL+ FD Atlas SUNTEST XXL+FD is an extra-large light stability test chamber : Information provided by the manufacturer on its webpage without guarantee: Light stability testing of Consumer Goods and Packaging The Atlas SUNTEST XXL+FD is an extra-large light stability test chamber especially tailored towards the needs of consumer goods, food and beverage testing. Its 3000 cm2 flatbed exposure area and tall chamber height is best-in-class for 3-D specimens testing and can accommodate all types of bottles and packaging. The SUNTEST XXL+FD is used to determine the light stability of new ingredients, products or packaging for food, beverages, or other FMCG (fast moving consumer goods) applications. It’s also extremely useful to perform highly accelerated shelf-life tests (ASLT) within days. A powerful chiller guar ...
Foil stamping - embossing Make PB&E Model Comet Year 1980 Size of the plate 150 x 200 mm Foil transport Automatic by pneumatic arm Condition machine can be purchased refurbished or "as-is" Details automatic foil transport (adjustable foil pull) adjustable embossing time, automatic table movement Available Direct
Atlas crane AK3500, built in 1990, length 5.00 m, with extension 6.50 m, in need of slight repair Net price 1.500,00 E
hydraulic outriggers for loader cranes Stroke 500 mm Stable design with guide via square tube Mechanically telescopic with bolt 300 mm - grid 100 mm Outer square tube 100 x 100 mm Folding device for support cylinder - can also be dismantled Outriggers can be folded down approx. 60° Retracted height 1,000 mm with folding device with integrated load holding valve Removable support plate - size 320 x 250 mm Weight 80 kg / piece - New - unused - 2 pieces in stock - unit price -
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 100/65/H65 mm -Weight: 0.75 kg/piece
Hydraulic cylinder for ATLAS loader crane Stroke 750 mm Piston rod 125 mm Outer diameter cylinder tube 235 mm Piston diameter approx. 200 mm Length retracted center - center bolt 1,100 mm Bolt diameter cylinder tube 80 mm Width of the mount 245 mm Bolt diameter 100 mm Both bolt mounts with plain bearings Spare part number original Atlas 4189526 Width of the piston rod holder 130 mm Weight approx. 330 kg / piece Original price approx. € 9,500,-- -New- - 2 pieces in stock - price per piece -
Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Shovel length closed: 1400 mm -Total height: 2200 mm
Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Contents: 400 l -Opening width: 1400 mm -complete: with rotary servo -Mounting bolt: Ø 80 mm -Intermediate mounting dimension: 340 mm -Weight: 700 kg
Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible.
width: 33 mm bolt-diameter: 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: ATLAS COPROD Model: ROC - L7(40) CR Year of Manufacture: 2008 Engine Hours (Old engine) : 8,043 - New reconditioned engine was installed recently. Find more here - / Contact us at -
Radio Shuttle pallet rack, 2 blocks of 312 storage spaces (total 624 spaces), max. pallet weight 1.000kg, for Euro and industrial pallets, 3 pcs Shuttles Stow Atlas 3.1 – used -: Price for 2 blocks and 3 radio shuttles from the location: 49.950.-€ (net), incl. dismantling etc.! Price for purchase of 1 block and 1 radio shuttle: 25.000.-€ (net) incl. dismantling etc.! Price Extra Radio Shuttle: 15.000.-€ (net). Manufacturer shelf: Stow Type: Atlas Shuttle 3.1 / Radio Shuttle Regal Year of Make: 2021 Stand Type: PLFB 15 Pallet type: Euro or industrial pallet Clear shelving width: 1,350mm Truss Type: SRBH 0488 Channel rail type: SRR 0130 Stand height: 6,300mm Number of channels / Euro pallets on top of each other: 4 Number of Euro pallets in a row per channel: 13 (11 industrial pallets) Permissible pallet load: 1,000kg Permissible shelf load (sum of channel ...
Technical data: Lifting speed: 16 - 182 m/min Stroke length: 400 mm autom. Table infeed in X/Z: 0.2 - 4.0 mm Swivel head: yes Dimensions, approx.: 1950 x 1330 x 1570 mm Weight, approx.: 1500 kg
ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect
Size: 166 x 211 mm Equipments: Full Automatic line of High Die Cutter for Cards (Business, Phone, Loyalty, Membership), Labels, tickets ST-18.02 Strip stock feeder SE-18.2 Infeed and Cross Cutter with Automatic Program D-18 Die Cutting Punch Unit with 2 chases PB-18.1 Banding machine with delivery Strip length min./max. : 350/1130 mm Strip width min./max. : 45/180 mm Precut label size min. : 25x45 mm Precut label size max. : 150x180 mm Die cut size min. : 20x41 mm Die cut size max. : 145x175 mm Stack heigh min./max. : 45x125 mm Min. trim per side for die cut : 2 mm Intermediate trim cut : 3 mm / 22 mm Height of cutting die : 60 - 100 mm Mecanical Speed : 10 - 15 strokes per minute Die Cut Pressure : 4 - 5 Tons Banding machine, width : 25 mm Machine is controled with program and screen Elecrical datas : 380V, 50 Hz, 6.8 KW, 16 Amp. Air supply required : 6 bars dry air (30 - 45 m3/h) incl. ...
Lifting platform, car lifting platform, lifting device, lifting lift, pit jack, axle free jack, truck lifting device, axle jack -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: included, see photos -Transport dimensions: 1000/940/H1400 mm -Total weight: 820 kg
Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple -Manufacturer: Atlas, clamshell bucket -Bucket width: 400 mm -Opening width: 1520 mm -Total height: 2190 mm -Mounting bolt: Ø 45 mm, dimensions see photos -Transport dimensions: 1520/500/H1685 mm -Weight: 682 kg
Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg
Digging bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg
Description Blumer Atlas 200 Label die-cutter ideal for small labels, banderoles and tax or value coupons from 1992, but very little used with tape feeder SE 18.4 Cross-section device Punching unit ST 18.2 Inline tape machine PB 18.2 and output channel Strip sizes: Length of the tape min. / max. 350 / 1115 mm Width of the tape min. / max. 45 / 215 mm (the smallest dimension is 20 x 44 mm) Label sizes: Pre-cut label size min. 25 x 45 mm Pre-cut label size max. 170 x 215 mm Stack height min. / max. 40 / 120 mm Intermediate bleed 3 – 40 mm Blank 3
Net weight: 1940 kg, power: 13.4 kW, with hydraulic. Loading shovel and 2 pcs. backhoe bucket, dismissed. Operating hours: 3500 h
permissible. Total weight: 12,000 kg, axle load: 8000 kg each
Machine starts, works and performs all functions. Auction-ID: A3-43534-11870
Engine brand: deutz Auction-ID: A3-43538-19239
Fuel system to be checked (suspicion of air). Auction-ID: A3-43544-21475
maximum number of results exceeded
please refine your search
13.500 € 
