atlas copco dgd used for sale

160,0 kW, max. 7,5 bar, 28,26 m3/min.

55,0 kW, max. 7,5 bar, 7,60 m3/min.

200.0 kW, max. 7.5 bar, 36.18 m3/min. condition as new. 2 stubble available.

Oil-free. Water cooled

oil-free, water cooled.

200,0 kW, max. 7,5 bar, 36,18 m3/min. Condition like new. 2 pieces available.

75.0 kW, max. 9.8 bar, 11.05 m3/min.

75,0 kW, max. 9,8 bar, 11,05 m3/min.

90.0 kW, max. 8.0 bar, 15.12 m3/min. With built-in compressed air dryer Kaeltemittel R 404a. Oil, oil filter, air filter and oelab scheider are new.

STANDARD-EQUIPPED

90,0 kW, max. 8,0 bar, 15,12 m3/min. With built-in compressed-air dryer refrigerant R 404a. Oil, oil filter, air filter and oil separator are new.

315.0 kW, max. 10.0 bar, 45.70 m3/min.

315,0 kW, max. 10,0 bar, 45,70 m3/min.

30,0 kW, max. 7,5 bar, 4,86 m3/min.

ATLAS COPCO FX 7 refrigeration dryer was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous for pipes and pneumatic tools. The ATLAS COPCO compressed air dryer is distinguished by its capacity of 3000 l/min, low compressed air consumption and a pressure dew point of +3°C, guaranteeing clean and dry air throughout its service life. The total weight of the device is 44 kg. Technical parameters of the ATLAS COPCO FX 7 refrigeration dryer - working pressure: 13 bar - pressure dew point: 3°C - capacity: 3000 l/min - pressure drop: 0.38 bar - connection: 1″ - maximum ambient temperature: 43°C - power: 1 kW - power supply: 230 V; 50 Hz - dimensions (L x W x H): 500 x 370 x 804 mm - weight of device: 44 kg

75.0 kW, max. 7.5 bar, 12.60 m3/min.

11.80 kW, max. 10.5 bar, 56.50 m3/min.

Air Screw Compressor Atlas Copco GR 200 200 kW, 20 bar, 21.66 m3/min. New Elektronikon control at 20000 total hours. Actual operating hours 21409

Air Pressure: 42 bar

Air filter -Type: 1030 0979 00 -Dimensions: Ø 350/H360 mm -Weight: 4.5 kg

110,0 kW, max. 20,0 bar, 12,60 m3/min, with built in dryer, only 80 working hours. Condition as new.

110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.

14.5 bar, 22.80 m3/min, refrigerant R 404a.

14.5 bar, 43.50 m3/min, refrigerant R 404a.

max. 14,5 bar, 43,50 m3/min, Refrigerant R 404a.

110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.

110.0 kW, max. 8.5 bar, 18.72 m3/min.

110,0 kW, max. 8,5 bar, 18,72 m3/min.

250 kW, max. 10.0 bar, 35.88 m3/min.

ID2932 Atlas Copco ROC L6-44 year/Year of construction 2007 approx. 11860 hours/hours 21 t Blast hole drill, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, many accessories optionally available (drilling tube 89 x 5000 mm, Mincon 3.5 "MP35 down-the-hole hammer, ballistic drill bit D105 etc.), optionally with spare parts dispenser machine ( Engine damage), year of construction 2001 Blast hole drilling rig, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, optionally many accessories available (drill pipe 89 x 5000 mm, down-the-hole hammer Mincon 3.5 " MP35, drill bit D105 ballistic etc.), optionally with spare parts dispenser machine (engine damage), year of construction 2001

250 kW, max. 10,0 bar, 35,88 m3/min.

200.0 kW, max. 10.00 bar, 30.00 m3/min. oil-free, water-cooled, excellent condition.

160.0 kW, max. 7.50 bar, 27.40 m3 rpm, oil-free, air-cooled

160,0 kW, max. 7,50 bar, 27,40 m3/min, oil-free, air cooled.

Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810

Rotary Screw air compressor, 75.00 kW, 3 x GA 808 and 1 x GA 810

90.0 kW, 10.0 bar, 15.0 m3/min. With frequency inverter. Volume flow 2.4 - 15 m3/min at 7.5 bar.

90,0 kW, 10,0 bar, 15,0 m3/min. With frequency inverter. Volume flow 2,4 - 15 m3/min at 7,5 bar.

ATLAS scissor lift table, lifting capacity 4 t German production table size 3000 x 1200 mm lifting capacity 4000 kg height of the unfolded table 1195 mm height of the folded table 450 mm pump motor power 4 kW table weight 1500 kg

With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers.

90.0 kW, 8.0 bar, 12.78 m3/min. Oil-free, air-cooled.

90,0 kW, 8,0 bar, 12,78 m3/min. oil-free, air cooled.