atlas copco compressor used for sale

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm -Volume flow rate: 28.11 m³/h -Max. operating pressure: 24.5 bar -Dimensions: 640/450/H425 mm -Weight: 131 kg

Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Number: 1 filter available -Price: per piece -Dimensions: 460/500/H950 mm -Weight: 32 kg

Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel blower -Type: Elmo-G 2BH1 603-1AC11-Z -Drive: 2.2 kW -Speed: 2860 rpm -Connection input: Ø 38 mm -Connection output: Ø 50 mm -Dimensions: 380/380/H380 mm -Weight: 28 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, motor compressor, refrigeration machine, refrigeration unit -Manufacturer: Dorin, refrigeration compressor cooling unit complete -Type: UA - K470CS-01 -Power: 3.48 kW / 1450 rpm -Volume flow: 23.37m³/h -Max.operating pressure: 30.5 bar -Number: 2x cooling unit available -Price per piece -Total dimensions: 1900/1000/H940 mm -Weight: 304 kg/pc.

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Compressed air tank, pressure container, pressure tank, compressed air boiler, pressure vessel, compressor tank, pressure accumulator for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, pressure accumulator with filter block from compressor type SL 270 -Pressure accumulator: Type 306022 V 230 L -Final pressure: max. 15 bar -Hole circle: Ø 240 x 22 mm -Filter units: see photos of individual components -Dimensions: 1600/980/H1270 mm -Weight: 289kg

Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm -Weight: 25kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm -Weight: 2.0 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, motor compressor, separating hood compressor, separating hood compressor, cooling unit -Manufacturer: Maneurop, compressor compressor type MTZ32 JF4 -Power: 2.0 kW -Voltage: 380V / 50Hz -Volume flow: 9.3 m³/h -Dimensions: 300/280/H355 mm -Weight: 22 kg

Refrigeration Compressor, Refrigeration Machine, Refrigeration Compressor, Refrigeration Unit, Refrigeration Compressor, Compressor, Motor Compressor, Separation Hood Compressor, Separation Hood Compressor, Refrigeration Unit, Hermetic Compressor -Manufacturer: Mitsubishi, compressor Hermetic Compressor type NH465YJE -Power kW -Voltage: 380-415/400-460V/50/60Hz -Technical data: see photo of nameplate -Dimensions: 310/200/H410 mm -Weight: 27 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer:BEKO, oil-water separation system Oil and water separation device type Öwamat KT 05 -Accessories: incl. Oekosorb replacement filter, see photos -Dimensions: Ø 680 x 1130 mm -Weight: 73 kg with pallet

refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, refrigeration machine, refrigeration unit -Manufacturer: VEB, refrigeration compressor cooling unit complete -Type: K 1.6 H 200.2 / DK1.6H200.2-2.7 -Power: 290 W -Voltage: 220V -Max.operating pressure: 15.2 bar -Technical data: see photos type plate -Total dimensions: 480/300/H245 mm -Weight: 22 kg

Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

Screw compressor, compressor, compressed air unit, compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Manufacturer: JUBA, compressor with dryer -Compressor: Type JB 1500WX4 -Volume flow: 520 l/min -Engine power: 6 kW -Pressure: 7 bar -Tank capacity: 160 l -Dryer: Type JB-10AC 0.5 kW -Drying capacity 1.5 m³/min -Individual components: see photos -Transport dimensions: 1320/820/H830 mm -Total weight: 180 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor -Manufacturer: Copeland, Compressor Refrigeration compressor type ZR11M3-TWD-561 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate -Number: 4x compressor available -Price: per piece -Dimensions: 380/330/H550 mm -Weight: 91 kg/unit

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor -Manufacturer: Copeland, Compressor Refrigeration compressor type QR 1 2M1 - TFDN-551 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate -Number: 4x compressor available -Price: per piece -Dimensions: 340/330/H480 mm -Weight: 70 kg/unit

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 750/600/H950 mm -Weight: 80 kg

Brand: ALUP Model: SCK-51-10 Serial number: 19100774 Specifications: - Max. pressure: 10 bar - Air flow: 5,100 l/min - Power: 37 kW - Air dryer: Integrated - Electrical connection: 400 V - Operating hours: 36,000 h Dimensions (L × W × H): 840 × 1,880 × 1,720 mm Auction-ID: A7-45257-9

Compressor SCHNEIDER UNM STS 660-10-270 XDK -used boiler powder-coated, incl. refrigeration dryer---------- Technical data ----------tank size: 270 litres, number of cylinders: 1, maximum volume flow: 660 litres, flow rate: 520 litres, maximum pressure: 10 bar, engine: 4 kW, speed: 2,895 rpm, dimensions (LxWxH): 900x800x1850 mmQuality info: - complete basic cleaning- electrics checked- immediately ready for use

Equipped with Hatz diesel engine, mounted in transport frame. Auction-ID: A1-41275-664

BODGE S50 – Air Compressor General data: Manufacturer: Bodge Model: S50 Power supply: 400 V / 50 Hz Motor power: 37 kW Maximum pressure: 10 bar Air flow: 4.72 m³/h Weight: approx. 850 kg Dimensions (L x W x H): approx. 1700 x 1000 x 1500 mm Description: Industrial air compressor BODGE S50 designed for reliable compressed air supply in industrial environments. The unit delivers a maximum pressure of 10 bar and is suitable for continuous operation with stable performance. Auction-ID: A7-45351-34

EMBRACO ASPERA T2178GK – Refrigeration Compressor General data: Manufacturer: Embraco Aspera / Slovakia Model: T2178GK Machine type: Professional refrigeration compressor Technical details: Refrigerant: R404A Power supply: 220 – 240 V / 50 Hz Description: Professional refrigeration compressor designed for medium to high power commercial applications. The unit uses R404A refrigerant, making it suitable for freezing and rapid cooling systems, and is compatible with standard electrical supply. Auction-ID: A7-45351-62

Code: 0350 Brand: FINI Model: KSC 5 - CE Standard Screw air compressor with dryer - CE Standard Compressor FINI KSC 5 CE Standard Motor 5,5 Hp Pressure 10 bar Rotational speed 1450 rpm Air flow 450 lt/min Tank capacity 270 lt Compressed air dryer HITEMA EDR 2.6 - CE Standard Flow rate 36 mc/h - 600 lt/min Rated power 0,19 Kw Volt 220 Overall dimensions: Compressor mm 1350 x 600 x 1200 h - 168 kg Dryer mm 350 x 450 x 770 h - 33 kg

COMPRESSOR from 2007 Yield: 2.2 M3/hour Noise level at 1 meter: 61 DB(A) Working voltage: 3x 400V (+/- 5%) DRYER from 2017 Nominal capacity: 3100 L/min. – 186 m3/hour Minimum inlet pressure: 4 bar Maximum inlet pressure: 14 bar Maximum air intake temperature: 70 degrees Compressed air connection: 11/4\" Dryer dimensions: 535mm x 515mm x 805mm(LxWxH) Auction-ID: A1-41991-16

Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 980 x 1010 mm; Approx. Weight: 206kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-51

Screw Air Compressor 11kW. Current：15HP /11kW ( Y-Delta Start). Flow Rate:1.6 m3/min (56CFM) Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 320kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-179

Screw Air Compressor 11kW. Current：15HP /11kW ( Y-Delta Start). Flow Rate:1.6 m3/min (56CFM) Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 320kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-43

Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 339kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-283

Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 980 x 1010 mm; Approx. Weight: 206kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-40

Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 980 x 1010 mm; Approx. Weight: 206kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-7

Auction-ID: A1-45166-12

Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 339kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-95

\"Capacity [m3/h] 54 Flowrate [l/min] 900 Tank capacity [liters] 270 Max pressure [bar] 10 Motor power [kW] 7.5 Air preparation station Integrated - VT version (refrigerant dryer, filters) Supply voltage [V] 400 Noise level [dB] 70 The compressor was serviced by GUDEPOL Legnica in 2024 (invoice available for inspection). Since then, it has been sitting unused as a backup, not even connected.\" Auction-ID: A7-40553-6

Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 339kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-282

Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 980 x 1010 mm; Approx. Weight: 206kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-47

Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 339kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-284

• Rotary vane compressor • Serial number 2000902 • Motor power 18,40 KW-1450 rpm • Working pressure 10 Bar • Total operating hours according to the counter 5206 • Electric box is included Auction-ID: A7-44536-133

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 01864 10 Built in 1993 max. pressure 13 bar Power consumption 11 kW Delivery volume 1,150 l/min Operating hours 34,957 B/h Defective contactor replaced Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7Y2-1

Operating conditions of this machine: unchecked. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-250

Manufacturer Boge Machine number 50373302 Type CL 20 Year of construction 2010 max. pressure 10 bar Power consumption 15 kW Delivery rate 2,240 l/min Operating hours 14,770 B/h Idle hours 2,428 B/h Nearest customer service in 2,894 B/h lxwxh 134x68x62 cm Weight 300 kg Loading costs 50.00 Euro Auction-ID: 043-H7J-3

Screw compressor Mark MSB 22 IVR defective Manufacturer: Mark Type MSB 22 IVR Machine number CAI 597705 Year of construction 2012 max. pressure 13 bar Power consumption 22 kW Delivery rate 3,517 l/min at 7.5 bar Operating hours 11,522 B/h Load hours 10,864 B/h Frequency converter needs new software lxwxh 130x78x120 cm Weight 458 kg Loading costs 50,00 Euro Auction-ID: 04J-7Y1-1

Screw compressor Cecatto CSM 15 Bj.2011 10 bar Manufacturer: Cecatto Cecatto is part of the Atlas Copco Group Also sold under the name Mark Airpress Machine number CAI 511821 Type Plus CSM 15 XB Year of construction: 2011 max. pressure 10 bar Power consumption 11 kW Delivery volume 1,420 l/min Operating hours 28,498 B/h Test run carried out LxHxW 82x65x100 Weight 180 kg Auction-ID: 047-DXM-3

Mannesmann Demag Start 026 Manufacturer: Mannesmann Demag Machine number 349012/23 Type Start-026 Year of manufacture 1996 max. pressure 10 bar Power consumption 15 kW Delivery rate 2,010 l/min Operating hours 33,700 B/h Load hours 16,400 B/h Test run carried out lxhxw 72x72x113 cm Weight 250 kg Loading costs 50,00 Euro Auction-ID: 04J-7XW-1

Speed-controlled screw compressor Renner RSKF 1-30 incl. refrigerant dryer and particulate filter Manufacturer Renner Machine number 1008121 Type RSKF 1-30 Year of construction 2021 max. pressure 10 bar Power consumption 30 kW Delivery rate 4,810 l/min Operating hours 11,760 B/h Load hours 8,671 B/h Machine utilization: 20-40% 799.87 B/h 40-60% 632.50 B/h 60-80% 427.45 B/h 80-100% 198.18 B/h Last service at 11,090 B/h incl. control unit for the frequency converter Particulate filter, connection cable and connection hose lxhxw 108x64x121 cm Weight 850 kg Loading costs 100,00 Euro Auction-ID: 04J-7Y8-1

Screw compressor Boge S 20-2 Manufacturer Boge Machine number 509692 Type S 20-2 Year of manufacture 2005 max. pressure 10 bar Power consumption 15 kW Delivery rate 2,240 l/min Operating hours 18,903 B/h Idle hours 1,613 B/h Customer service due LxHxW 120x88x115 Weight 350 kg Auction-ID: 047-DXL-3

- Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-47

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 2233 Year of construction 2002 max. pressure 7.5 bar Power consumption 11 kW Delivery volume 1,855 l/min Operating hours 64,145 B/h Load hours 48,778 B/h Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7XZ-1

Screw compressor Renner RSK 22 with refrigerant dryer Manufacturer Renner Machine number 21194 Type RSK 22 Year of construction 2009 max. pressure 10 bar Power consumption 22 kW Delivery rate 3,100 l/min Operating hours 35,160 B/h Load hours 10,416 B/h Nearest customer service in 1,986 B/h Test run carried out lxhxw 175x87x129 cm Weight 588 kg Loading costs 100,00 Euro Auction-ID: 04J-7XY-1