atlas copco compressor used for sale

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

Key data: 5 , 10

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 "  ...

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...

Key data: 3 , 40 , 14

Capasity 14,4 m3 Pressure 40 bar rpm 1450 power demand 3,6 kW

Mobile compressor SCHNEIDER Compact Master CPM155-8-6WOF Base, other nameplate not to be found

Refrigeration Compressor / Condenser Unit Second Hand Manufacturer: Franchill Ltd Model: SP3X45-RDM-FS 400V-1PH-50Hz Compressor / Heater Model: ZB45KCE-TFD 3 x 4.6kw For more information and more available stock please visit us at - advancedbrewing.co.uk

Key data: 11

Shamal K60 Suitable for 15 hp, flow rate 1745 l/min This is an original new compressor pump. Compare the measurements with the information in the text and on the photo. This will help you determine if it's the right pump. X=245mm Y=300mm D=550mm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Shamal K30 Suitable for 5.5 / 7.5 hp / 4 / 5.5 kw, flow rate 900 l/min This is an original new compressor pump. Compare the measurements with the information in the text and on the photo. This will help you determine if it's the right pump. X=190mm Y=225mm D=400mm This compressor pump is used by several compressor manufacturers. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Compressors Nirvana oil-free variable speed screw compressors 55-75 kW it ran 19138 hours. Nirvana oil-free compressors, with a matching variable speed inverter and hybrid permanent magnet motor (HPM®), offer unparalleled energy efficiency at all speeds and outstanding reliability. They deliver ISO 8573-1:2010 Class 0 certified, 100% oil-free air for the most critical applications Find more here - / Contact us at -

Offer 26042 Operating hours 49500 h - Operating pressure 11 bar - Delivery rate 680 l/min. - Drive 400 V / 5.5 kW - Engine speed 2950 rpm - Air tank 200 L - Space requirement approx. W 600 x H 1600 x D 1000 mm - Weight approx. 250 kg

An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.

TECHNICAL DATA: Piston compressor Installed power: 2 hp Maximum pressure: 10 bar Working pressure: 8 bar Capacity: 100 liters Voltage: 230 V

- Exhibition machine -For continuous air demand and intermittent operationElectronic control for reliability and efficiency.Increased flexibility thanks to two compressed air tanksHigh-quality and expandable equipment.Smooth and quiet. Due to temperature control of the oil, it can also be used in intermittent operation. Equipment DUO KKwith refrigerant dryer and fine filter as pre-filter upstream of the refrigeration dryerCondensate conditioner for oil - water separationAutomatic steam trap.---------- Technical data

Key data: 3

Volume flow 300 (50 Hz) / 360 (60 Hz). m³/h Pressure difference approx. +240 to +260 mbar (50 Hz). Engine power 3.0 kW (50 Hz) / 3.6 kW (60 Hz). Speed approx. 2850 (50 Hz) / 3370 (60 Hz). Current consumption (50 Hz) 15.9 A () / 9.20 A (Y). Degree of protection IP55 (standard, see type protection). Voltage 200 - 480 V Weight 53 kg

Compressor ALMiG VARIABLE 35 Screw Compressor Compressor ALMiG VARIABLE 35 Screw Compressor Manufacturer: ALMiG Type: VARIABLE 35 Year of Make: 2014 Volume flow: 1.00–6.05 m³/min Final pressure: 5–13 bar Motor power: 40.0 kW Engine speed: 1250–6500 rpm Serial Number: F1410719 / S0030700 Number of units: 2 Location: Pforzheim

IHI TURBO OIL FREE COMPRESSOR, WATER COOLED Model : TRA20-235kW Origin : Fully Made in Japan Operating Condition Gas : Compressed Air Capacity : 40m³/min Suction Temperature : 35ºC (Design Point) Relative Humidity : 80% Discharge Pressure : 6barG Compressor Specification No of Stage : Three Output of Driver : 235 kW Voltage : AC415V / 50Hz / 3PH Noise Level : 85dB Starter System : Inverter Starter Cooling Water : Fresh Water Inlet Temperature : 32ºC Water Requirement : 35m³/h Dimensions L x W x H (mm) : 3,700 X 2,000 X 2,000 Weight : 7,100 kg

Screw compressor CompAir Type L07-13 Year of manufacture 2008 CE With compressed air dryer Make Knoll EKO MAK Power 7.5 kW Volume flow 0.69 m³/min. Step pressures 13 bar Suction pressure 1.0 bar Full assist current 15/18 amps Speed 3000 rpm. Voltage 400 Volt / 3 Phase / 50 Hz

An HD piston compressor Bauer is available. Capacity: 800l/min, max. operating overpressure: 160bar, max. operating pressure: 2320psig, power: 18.5kW, speed: 1180rpm. Machine dimensions X/Y/Z: approx. 2200mm/1100mm/1450mm, weight: approx. 750kg. An on-site inspection is possible.

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-44803-13

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-44803-40

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-44803-223

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-44803-199

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-44803-269

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-44803-279

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-44803-68

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-44803-127

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-44803-304

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-44803-298

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-44803-170

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-44803-177

Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-44803-5

Pressure vessel compressed air max 16 bar With pressure relief valve Standing model Content: 1000 litres

Volume: 2000l Gas: air Max pressure: 10.7 bar Max temp: -15/55?C

Screw compressor with dryer. Pressure vessel capacity: 750 liters. Capacity: 3.09 m?/min. Max. pressure: 10 bar. Motor 22 kW.

1. Operating pressures and environment Maximum operating pressure: 13.0 bar. Minimum operating pressure: 5.0 bar. Ambient temperature: 1 ... 45 °C. 2. Volume flow rate (depending on operating pressure) — m³/min 7.5 bar: min speed 2.25 m³/min — max speed 13.47 m³/min. 9 bar: min speed 2.23 m³/min — max speed 12.63 m³/min. 10 bar: min speed 2.21 m³/min — max speed 12.11 m³/min. 13 bar: min speed 3.92 m³/min — max speed 10.69 m³/min. 3. Temperatures & Cooling System Outlet temperature aftercooler above ambient temperature (at full load): +8 °C. Fan cooling air flow rate: 164 m³/min (50 Hz) · 170 m³/min (60 Hz). Cooling air outlet temperature above ambient temperature (at full load): 26 °C (50 Hz) · 25 °C (60 Hz). 4. Pressure ratios / residual pressure Residual pressing at ambient temperature 35 °C / 45 °C (Pa): 80 / 40 Pa (50 Hz ...

Type: Screw compressor Model: Kaeser SX 8 YOM: 2018 Rated power: 5.5 kW Air flow: 800 l/min Max. pressure: 11 bar Working hours: 19,742 h (17,808 h under load) Time left to maintenance: 3000 h Control system: SIGMA CONTROL 2 with RFID reader Rotor: SIGMA PROFILE, energy-saving, low-speed Motor class: IE3 premium efficiency Dimensions (D x W x H): 590 x 632 x 970 mm Weight: 155 kg Features: RFID card, SD slot, KAESER cooling system, quiet & compact, high efficiency Auction-ID: A7-44886-19

Rated power: 15 kW Air flow: 2500 l/min Max. pressure: 11 bar Time left to maintenance: 3000 h Working hours: 8076 h Dim. (LxWxH): 780 x 1480 x 1255 mm Weight: 487 kg Auction-ID: A7-44886-15

Motor power: 4 kW YOM: 1997 Operating hours: 0 (fully refurbished) Flow rate: ~0.55 m³/min at 8 bar Max. pressure: 10 bar Air tank volume: 90 l (integrated) Noise level: ~64 dB(A) Cooling: Air-cooled Electrical supply: 400 V / 3 Ph / 50 Hz Control system: Basic Connections: Air outlet: 3/4\" BSP | Condensate: 1/2\" BSP Dimensions (L x W x H): 600 x 630 x 850 mm Weight: ~150 kg Condition: Refurbished to \"as new\" with zero hours Features: Energy-efficient, robust design, regular maintenance required Replaced parts: New air & oil filters, separator, bearings, gaskets, belts, electrical components, intake & MPV valves Auction-ID: A7-44886-12

Power: 18.5 kW (25 hp) Operating parameters: Working pressure 13 bar; FAD 2.66 m³/min; noise ~70 dB(A); operating hours 31,000 h Workpiece capacity: Industrial compressed air supply; continuous duty applications Supported edges: N/A Edge types: Compressed air generation; drying (integrated dryer) Included equipment: Rotary screw compressor; integrated air dryer; air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2007; Manufacturer N/C Remarks: Used condition; high operating hours; suitable for workshops and industrial compressed air systems 18.5 kW rotary screw compressor with integrated dryer and 13 bar working pressure. Auction-ID: A7-44886-1

Power: 11 kW (15 hp) Operating parameters: Working pressure 10 bar; FAD: 1.82 m³/min @7.5 bar; 1.61 m³/min @10 bar; 1.32 m³/min @13 bar; noise ~70 dB(A); operating hours 54,000 h; dim. 667 x 630 x 1,050 mm; wt. 219 kg Workpiece capacity: Industrial compressed air supply; small–medium workshop use Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; air-cooled system; control panel; compact enclosure Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2003; Manufacturer N/C Remarks: Used condition; high operating hours; suitable for workshop or light industrial applications Compact 11 kW rotary screw compressor with variable output depending on pressure level. Auction-ID: A7-44886-6

Power: 22 kW Operating parameters: Working pressure 13 bar; FAD 3.45 m³/min; noise ~70 dB(A); operating hours 25,816 h Workpiece capacity: Industrial compressed air supply; continuous operation Supported edges: N/A Edge types: Compressed air generation; drying (integrated air dryer) Included equipment: Rotary screw compressor; integrated air dryer; air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2006; Manufacturer N/C Remarks: Used condition; high operating hours; suitable for workshop and industrial air systems 22 kW rotary screw compressor with integrated dryer, 13 bar pressure and 3.45 m³/min capacity. Auction-ID: A7-44886-2

Type: Screw compressor Model: Kaeser SX 8 YOM: 03/2021 Rated power: 5.5 kW Air flow: 800 l/min Max. pressure: 15 bar Working hours: 173 h (41 h under load) Time left to maintenance: 500 h Control system: SIGMA CONTROL 2 with RFID reader Rotor: SIGMA PROFILE, low-speed, energy-saving Motor class: IE3 premium efficiency Dimensions (D x W x H): 590 x 632 x 970 mm Weight: 155 kg Features: RFID access card, SD card slot, quiet and compact, high efficiency via KAESER cooling system Auction-ID: A7-44886-16

Power: 22 kW (30 hp) Operating parameters: Working pressure 10 bar; FAD 3.21 m³/min (113 CFM); noise ~71 dB(A); operating hours 15,000 h; dim. 787 x 698 x 1,202 mm; wt. 367 kg Workpiece capacity: Industrial compressed air supply; continuous operation Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; air-cooled system; control panel; compact enclosure Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2006; Manufacturer N/C Remarks: Used condition; moderate operating hours; suitable for workshop and industrial applications 22 kW rotary screw compressor delivering 3.21 m³/min at 10 bar with compact footprint. Auction-ID: A7-44886-7

Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-44886-14

Power: 15 kW (20 hp) Operating parameters: Working pressure 11 bar; FAD: 2.20 m³/min @8 bar; 1.86 m³/min @11 bar; 1.40 m³/min @15 bar; noise ~65 dB(A); operating hours 39,454 h Workpiece capacity: Industrial compressed air supply; continuous operation Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2007; Manufacturer N/C Remarks: Used condition; high operating hours; D service applied; suitable for workshop and industrial air systems 15 kW rotary screw compressor with variable FAD depending on pressure and low noise level. Auction-ID: A7-44886-3

Power: 75 + 2.2 kW Operating parameters: Working pressure 10 bar; FAD 10 m³/min; noise ~75 dB(A); operating hours 51,000 h; dim. 1,995 x 1,065 x 1,450 mm; wt. 1,320 kg Workpiece capacity: Industrial compressed air supply; high-capacity continuous operation Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2011; Manufacturer N/C Remarks: Used condition; high operating hours; suitable for large-scale industrial air demand applications High-capacity 75 kW rotary screw compressor delivering 10 m³/min at 10 bar. Auction-ID: A7-44886-5

2 units semi-hermetic reciprocating compressors by DWM Copeland, model D6SJ1-400X-AWM/D. Technical data: 6-cylinder reciprocating compressor Displacement: approx. 127 m³/h Speed: 1450 rpm at 50 Hz Voltage: 380–420 V (50 Hz) / 440–480 V (60 Hz) Protection class: IP54 Max. operating pressure: 28 / 22.5 bar (H/L) Year of manufacture: 02/2003 Manufacturer: Copeland (Made in Belgium) Condition: Used, removed from system. Signs of storage and use present. Functional test not performed. Sale in current condition, without warranty or guarantee.

Alteco 1000 Liter tank Pressure vessel 11 bar

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor -Handover: in its current condition as inspected -Power outlet: Damage, see photos -Manufacturer: Frigopol, separating hood compressor -Type: D 60300 -Power: 2.2 kW / 1450 rpm -Voltage: 220-240/380-420 V -Dimensions: 400/400/H500 mm -Weight: 71 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1450 rpm -Volume flow rate: 22.14 m³/h -Max. operating pressure: 24.5 bar -Number: 2x cooling units available -Price: per piece -Dimensions: 550/315/H390 mm -Weight: 88 kg