136,161 used machines on RESALE, but how to find them? Machine Search
Key data: 73 , 3
Screw compressor, 500 V drive, serviced
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg
Air filter -Type: 1030 0979 00 -Dimensions: Ø 350/H360 mm -Weight: 4.5 kg
Key data: 160 , 8 , 1170
For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037
Key data: 250 , 8 , 2322
For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg
Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible.
Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg
Second Hand Atlas Copco GA250VSD 250 kW with 10 bar and 44.90 m3/min. Year of manufacture 2018 with around 34,000 hours
Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg
Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm Isbmrc Iporp D Uxenjtf width: 1600mm height: 2000mm weight: 4400 kg
Second Hand Atlas Copco GA315VSD. 315 kW with 8.5 bar and 58.50 m3/min. Year of manufacture 2019 with around 36,000 hours
Second Hand Atlas Copco GA400W (water-cooled) 400 kW, 8.5 bar at 66.60 m3/min. Year of construction 2009
Second hand oil-free Atlas Copco ZR132. 132 kW with 7.5 bar and 19.10 m3/min. Water-cooled. Built in 2010 with around 39,000 hours.
A screw compressor Atlas Copco with integrated refrigerant dryer is offered. Power: 11kW, motor speed: 7700rpm, operating pressure: 12.75bar, capacity: 32l/s, variable speed controlled, operating hours: 9035h, weight: 271kg. An on-site inspection is possible.
Manufacturer: Atlas Copco Model: ZE 4 VSD (51 psi) with aftercooler Type of Machine : air compressor Temperature at max operating pressure: 40 °C Nominal pressure levels: 2.25 – 3.5 bar(e) Max. effective operating pressure: 2.25 – 3.5 bar(e) Min. effective operating pressure: 1.05 – 3.0 bar(e) Max. motor speed: 1200 U/min Electrical power consumption: 214.8 – 254.1 kW Air outlet temperature at max load: 40°C Required oil volume: 55 L Sound pressure level: 82 dB(A) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Standard radiators, car radiators, oil coolers, heat exchangers, compressor radiators, hydraulic oil coolers -Manufacturer: AKG, lightweight metal oil/air cooler with filter from Atlas Copco compressor type GA 408 Pack -Type: 1613 2726/653.92 -Pressure: max. 12 bar -Dimensions: 910/400/H700 mm -Weight: 49 kg
electric motor, three-phase motor -Manufacture: Siemens Atlas Copco, electric motor from compressor Atlas Copco type GA 408 Pack -Type: 1RA6 183-2AB 51-Z -Power: 30 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B5 -Dimensions: 625/480/H395 mm -Weight: 156 kg
Key data: 48 KW, 60 kVA
We currently offer: No. 008 Atlas Copco generator set Type: QAS60 Engine Perkins 3910/1500 Power 60 KVA / 48 KW Generator LeRoy Somer Hz 50 RPM 1500 IP 23 AVR control R250 Year of construction 2013 dB 87 Connection: 16A, 32A, 63A, socket Operating hours 19532 Metrics L: 2.80m W: 1.15m H: 1.75m Weight: 2130 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Tested Atlas Copco ZR160VSDFF oil-free screw compressor. 160 kW Year of manufacture 2018 Only 27889 hours. Full service history. drum dryer integrated. Frequency-controlled.
screw compressor + dryer capacity: 702 l/min (at 10 bar) Maximum working pressure: 10 bar Power: 5.5 kW / 7.5 hp Pressure tank: 270 l Total operating hours: 10,670 Hours under load: 1,582
We currently have over 15 Atlas Copco GA90 in stock in various versions. Frequency-controlled. With integrated dryer.
Two peripheral devices for an injection moulding facility are available. 1) Compressor Atlas Copco GA 15, year of manufacture: 1992, air flow rate: 28.2l/s, motor power: 15kW. 2) Dryer Atlas Copco FD 40, operating pressure: 20bar. Documentation available. An on-site inspection is possible. The machines are ready for loading. Sale of individual units is possible.
Atlas Copco SF 15 Oil-Free Scroll Compressor The SF series uses scroll technology, where there is no metallic contact with the compression elements, which is why absolutely no oil is needed in the compression chamber. This makes the system ideal for applications that require completely clean and oil-free compressed air (e.g. in the laboratory, medical or food sectors). The three installed scroll compressor elements were recently overhauled or replaced. Operating hours (total): 15,983 hours (The actual time the compressor has been running since 2001). Regulator hours: 99,527 hours (the time the controller was energized). Runtimes of the individual scroll elements (compressor stages) Operating hours Element 1: 735 hours Operating hours Element 2: 735 hrs Operating hours Element 3: 736 hrs Technical data: Manufacturer: Atlas Copco Model / Product Type: SF 15 (Oil ...
Motor power: 45kW, max. volumetric flow rate: 140l/s at 8bar, max. operating pressure: 13bar. Documentation available. Inspection by appointment is possible.
A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range ...
4000 werkuren! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L
Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible.
feed pressure: 8,5 bar liter capacity: . l total power requirement: 454 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.
A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.
Brand: Atlas Compo Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198kg. Assets: 5.5 kW Sound level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0- 10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm State machine: Very good Electrical connection: 3 phase Missing parts: No Photos/film available: Photos available 10.2.192
General SKU398U1172 LocationBarneveld CEcheck MakeAtlas Copc Pressure Working pressure0.0005 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume205000 Ltr. Motor5.5 KW Specified Features - Vacuum pump PumpHigh vacuum, oil seal rotary vacuum pump Number of pumps:1 Capacity205 m³/h With motor5,5 kW MaterialMild steel General TypeGV 200 Mach.No.1300515 Year of construction2013 Floorspace0,47x0,33 m Total height0,65 m Weight155 kg Extra SpecificationsUNUSEDOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberVacuum pumpsBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySoli ...
Screw compressor GA132VSD Atlas Copco. 132 kW 8.5 bar 26.06 m3/min. Inverter integrated.
Technical data: - Operating hours 4248 h - Load hours 1978 h - Operating pressure 10 bar - Delivery rate 3.34 m³/min - Drive 400 V / 22 kW - Motor speed 3000 rpm - Space requirement approx. W 1300 x H 1250 x D 800 mm - Weight approx. 490 kg
Operating hours 58730 h Technical data: Max. compressed air: 14 bar Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg
Technical data: - Operating hours 20256 h - Operating pressure 13 bar - Delivery rate 4.09 m³/min - Drive 400 V / 26 kW - Motor speed 3000 rpm - Space requirement approx. W 900 x H 1750 x D 900 mm - Weight approx. 490 kg
Key data: 22 , 8 , 2
Atlas Copco SF22+ Compressor Atlas Copco CD45+ Dryer Sold as a set. Oil-free air compressor Pressure: 8 bar Flow rate: 2.4 m³/min Power: 22 kW Weight: 687 kg Year of construction: 2024 As good as new Unused device All employees speak Dutch, German and English Prices plus VAT Shipping available for an extra charge (Subject to changes and errors in technical data, information and prices as well as prior sale)
Screw compressor Atlas Copco GA160VSD+FF 160 kW 8.3 bar 33.10 m3/min Inverter and dryer integrated WRG integrated
Second Hand Compressed Air Refrigeration Dryer FD1750+ 400V/50 Hz 14.00 bar 105.00 m³/min Year of manufacture 2018
A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible.
General SKU221Y089 LocationBarneveld CEcheck Pressure Pressure buildup10 Bar Main Features Capacity0.98 m3/Min Motor7.5 KW Pressure10 Bar Specified Features - Blower Capacity0,98 m³/min General MakeAtlas Copco SerialITJ475307 TypeG7 FF Year of construction2021 Weight250 kg Extra SpecificationsOil-injected rotary screw air compressor with integrated refrigerant dryer:&:nbsp:Refrigerant type: R513A:&:nbsp:Max inlet temperature: 46 °C,&:nbsp:Max ambient temperature: 46 °C,&:nbsp:FAD capacity: 16.4 l/s = 59.0 m³/h = 34.7 cfm,&:nbsp:Duty: Continuous operation / 24-7 useOils & fatConsumer wastePaints & coatingsPowdered foodsBlowersGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE- ...
Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar 14.70 m3/min
Screw compressor Atlas Copco GA160 160 kW 7.5 bar 30.20 m3/min Year of Make: 2017 Hours: 39,772
Atlas-Copco 1500 liter tank pressure vessel
Compressor: 13 bar Dryer Atlas-Copco FD220 14 bar Volume flow rate: 8.52 m3/min Power imput: 50 kW
maximum number of results exceeded
please refine your search
