127,905 used machines on RESALE, but how to find them? Machine Search
Atlas Copco GA11VSD+FF screw compressor Including: Atlas Copco FX40 Cooling Air Dryer 900 litre buffer tank Year compressor construction: 2017 Year of refrigeration air dryer: 2022 Compressor size: 1420 x 600x 630 cm Refrigerator air dryer size: 100 x 60 x 420 Standing buffer tank size: 220 x 85 cm Working disassembled, hours not known Depicted air shafts can also be taken with you if interested. Auction-ID: A1-41991-75
Atlas Copco GA11VSD+FF screw compressor Including: 500 litre buffer tank Compressor year: 2007 Compressor size: 100 x 800 x 600 cm Standing buffer tank size: 205 x 60 cm Working disassembled, hours not known Auction-ID: A1-41991-76
Manufacturer Atlas Copco Machine Number API 432897 Type GA 30 VSD Year of construction 2012 max. pressure 12.8 bar Power consumption 30 kW Delivery rate 5,580 l/min Operating hours 34,011 B/h Machine utilization: 1-20 27% 20-40 30% 40-60 26% 60-80 12% 80-100 5% Test run carried out lxwxh 134x86x148 cm Weight 600 kg Loading costs 75,00 Euro Auction-ID: 043-H7G-3
Refrigeration Dryer Atlas Copco FD 280 Air flow rate 16,800 l/min Manufacturer Atlas Copco Machine number AIF 094494 Type FD 280 Year of manufacture 2004 max. pressure 14.5 bar Power consumption 3.7 kW Delivery throughput 16,800 l/min Refrigerant R 404 A Compressed air connection 2 1/2 inches Test run carried out lxhxw 114x91x84 cm Weight 175 kg Loading costs 50,00 Euro Auction-ID: 04J-7Y3-1
Air flow rate 10,800 l/min Manufacturer Atlas Copco Machine number ITJ 556933 Type FD 180 VSD Year of construction 2022 max. pressure 14 bar Power consumption 3 kW Delivery throughput 10,800 l/min Refrigerant R 410 A Machine is in mint condition lxwxh 81x104x97 cm Weight 134 kg Loading costs 50.00 Euro Auction-ID: 043-H7M-3
In stock in wooden box, dimensions wooden box approx. 800x540x630 mm Auction-ID: A1-45495-423
Pressure: 7.5 bar Flow rate: 28 lt/sec Power: 11 kw Serial: ARP 73928 Estimated weight: 120 kg Approximate dimensions: 1200x800x1000h mm Auction-ID: A7-44996-11
Delivery pressure 10 bar Effective delivery rate 252 L/min Boiler capacity 90 l / bar Number of cylinders 1 pc. Motor 400Volt / 1.5KW Speed 777 rpm Machine weight approx. 70 kg. Dimensions L-W-H 0.97 x 0.5 x 0.9 mm Condition: never used / new (5) Auction-ID: A7-45761-768
Atlas- Copco XATS138, 10.3 Bar, 8M3, Use of Compressed Air and Electricity (MSA), KUBOTO 2403-cr-t-ef02 Diesel Engine Auction-ID: A1-45383-11
High-performance hot air gun Leister Auction-ID: A7-45427-45
1.400 litre, Stock number: T3636, Litre: 1.400, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Tank cover: In top, bolted Ø 450 mm., Inner diameter: Ø 1400 mm., Outer diameter: D 1750 mm., Total height: 2020 mm., Manufacturer: N. E. Atlas
250 cm width, approx. 2.63 m³ capacity, 583 kg dead weight, with Atlas mount
BIG backhoe bucket 65cm working width with Atlas attachment, with welded cutting blade and teeth, Dimensions of the mount:, Bolt diameter: 100 mm, Rear locking bolt: 40 mm, Handle/mounting width: 250 mm, Bolt spacing [Center - Center]: approx. 350 mm, suitable for 6-12 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.
Atlas machining center tubeless version X-axis stroke = 6000 mm Power supply 400V 50Hz Europower supply Anuba Group in CA Anuba Diam.13 sheet Vertical support for milling unit 0/90pn Upright position n.2 Milling unit 15HP Index HSK F63 Fixed head with 2 outlets blade holder D=220 + cutter holder - HSK 63 F Tool Holder 14 pos.side trolley HSK63 Front upright position Drill head Saw for longitudinal incisions 11 kW frequency inverter 8 suction cups 114X140MM - H 100 (to be confirmed) 12 suction cups 125x75MM - H 100 longitudinal (to be confirmed) 2 suction cups 114x140mm - H 75 for blocking. Template (to be confirmed) 3 additional vacuum devices for workpiece blocking 2 pneumatic vertical pressers supp. - 1 MVT. - 100 hours (to be confirmed) 2 horizontal pneumatic vices (to be confirmed) Positioning 10 bars + suction cups on display CE safety standards for atlas bati xl Atlas ...
Features: Cab 4wd Deutz diesel engine Excavator bucket Quick change system CW30 connection Auction-ID: A1-40133-189
Atlas AB 1302 D wheeled excavator from 1977 in classic, robust design with twin tyres. Equipment: • Front dozer blade • Rear outriggers • Two backhoe buckets Simple and proven technology, suitable for earthworks, demolition and agricultural applications. Machine is functional, but last stood still for about 2 years; batteries and fuel are required for commissioning. Auction-ID: 04F-RBC-2
Equipped with: long boom, sorting grab, outriggers, 4x4 drive, Dutch registration, automatic lubrication, work lights, hydraulic quick coupler, extra hydraulic functions on boom Auction-ID: A1-40134-46
Equipped with 4x1 bucket, forks, hydraulic quick coupler Auction-ID: A1-40134-57
Equipped with 4-Cil. Diesel engine; hydraulic quick coupler; CW30 connection; additional hydraulic function; Auction-ID: A1-40134-86
After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated
After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003
Weiss Air Conditioning Ultraclean ULTRA 55.2 Manufacturer: Weiss Klimatechnik GmbH Device type: Ultraclean, ULTRA 55.2 DXU Year of construction: 2007 Nachheitzer 10.5 kW Cooler: 12.7 kW Humidifier: 3 kg/h Filter class: F7 Supply air flow 2500 m{h ext. pressing 200
Equipped with: 2x Li Light 150W and 1x Li 150W Auction-ID: A1-40104-78
Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used
Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used
Double diaphragm pump with air drive DEPA type DH40-FA-ZRTDreactive air diaphragm pump, double pumpSeries No.: B1802498 year of construction 09.05.2018Temperature: max. 130CBau size: 40Grain size: max. 16 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/8Suction connection: 1 1/2Pressure connection: 1 1/2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE- Balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H: 370 x
Double diaphragm pump with compressed air drive DEPA type DH50-FA-ZRTDoduct diaphragm pump, double pumpSeries No.: B1600416 year of construction 26.01.2016Temperature: max. 130CBausize: 50Grain size: max. 18 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/4Suction connection: 2Pressure connection: 2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE Composite balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H 550 x 350 x
Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-44886-14
Filter system, air conditioning unit, air conditioning, fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Filter unit (from an air conditioning system) -Manufacturer: Wolf -Type: KG Top 4040 -Power: Fan 4x 5.0 kW -Volume flow: 47000 m³/h -Dimensions: 2950/2800/H2800 mm -Weight: 1400 kg
Air suspension - working air conditioning - starts, drives and brakes very smoothly - airbag & engine light is on (engine light is on for unknown reason) Auction-ID: A3-43367-10701
Equipped with: 1x Air curtain 150cm and air curtain 200cm, 1x central heating system connection Auction-ID: A1-40104-79
Equipped with: 1x revo-air Li 100w and 1x Li light 200w, user manual, technical booklet Auction-ID: A1-40104-80
Equipped with: control panel, instruction book, technical book Auction-ID: A1-40104-77
Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-23
Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.
Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.
used
Material: steel Engine 11 kW Very good condition. You can also get the entire system with all components.
Air-cooled liquefaction kit Bitzer without compressor,Type LH135/F302H, New, Base plate with condenser and collector
Air pressure-done piston pump aerial entrance pressure max. 8 cash Max Materialvolumenstrom Materialvolumenstrom materialvolumenstrom 4.5 l / min. translation 30:1 224 cash material temperature max. 90°C high-grade steel execution (changes and mistakes in the technical data, information and prices as well as intersales reserve!)
maximum number of results exceeded
please refine your search
250 € 
