127,861 used machines on RESALE, but how to find them? Machine Search
Dormatec AirBench FN066784A - Extraction table The extraction tables are suitable for all types of contamination (metal, plastic, stone, wood, glue steam, etc.) thanks to a variety of filters. Dust, steam or smoke are immediately extracted through the work surface. The extraction tables are available in different sizes and configurations. All you need is a power outlet, plug and play! The FN extraction table, like the FP model, is a welded steel table with a load capacity of 150 kg on the tabletop and has access to the filters at the front of the table. Construction of the FN suction table - Industrial design - Robust welded filter housing made of sheet steel 2 mm - Steel surface in sheet steel 3 mm - perforated slide. 4 mm - Surface treatment: Powder coating in RAL 7035 (light grey) Filter - A - Non-sparking dust Aluminum, plastics, atmospheric dust, flour or simi ...
Key data: 4 Meter, 13 t
Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...
Key data: 4 Meter, 13 t
Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 039.660 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 3 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty 24 months from th ...
Turntable diameter: 1500mm, max. pallet height: 2400mm, max. pallet weight: 2000kg, rotation speed: 8rpm, film carriage pre-stretch: 200%. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2650mm, weight: approx. 1200kg. An on-site inspection is possible.
A compact, effective and powerful system for the separation of light residues. The adjustable suction head can be mounted directly on a conveyor belt or above a star screen deck. The MM Air 22 air classifier is designed for maximum impact, ease of installation and reliability. The MM Air 22 air classifier has the following features: 22 kW highly effective suction unit with belt drive Built-in electric control panel Variable speed control Air flow rate up to 266 m³/min Large doors for easy maintenance and cleaning Reinforced fan wheel and suction chamber Universal conveyor belt attachment There can be two suction heads on the machine can be attached Vacuum head: Suction head suitable for a bandwidth between 800 - 1200mm Easy to assemble and stable while working 400mm air hose connection to MM-Air 22 Electric Suction Fan Unit: Length: 1850 mm Width: 1323 mm Heigh ...
Aircooled chiller SYSTEMAIR SYSCROLL 420 AIR CO E COAT 414.2 KW Cooling capacity: 414.2 kW / 117.78 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. Bitzer GSD80485VAB4-2 (scroll) Type of refrigerant: R410а Number of fans: 8 pcs. Dimensions: 4.55x2.15x2.5 m. Weight: 2441 kg. Working hours: 5588/5528/7735/2825 h. Condition: Good
Nieuwe Airpress schroefcompressors 10 PK /7,5 Kw op 500 lier perslucht ketel met een vriesdroger direct coupled Capasiteit 100 liters per min
General SKU315T1297 LocationBarneveld MakeWeisshaar TypeLKTA 90 Mach.No.205149 Pressure Working pressure1 Bar Main Features Heating (medium)Electric Capacity8 KW Specified Features - Temperature control unit MaterialStainless steel Temperating machineair cooling and drying unit Electric heatingcheck With coolingcheck R407c, volume 10,7 kg Temperature-15/48 °C. Motor8 kW 400 Volt Information Year of construction2005 Total height2 m CEcheck Floorspace1,2x1,1 m Weight410 kg Extra SpecificationsRefrigeration fluid R407C cooling capacity 21 kW operating pressure 24 bar nominal air flow: 900 Nm³/h (15 Nm³/min) airflow excess heat 5500 m³/h air connections DN 125 condensate drain 3/4 Temperature control unitsWeisshaarHeat exchangers > Temperature control unitsBrand > Weisshaar What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...
1 BABCOCK stenter for woven, roller width 340 cm, working width 320 cm, year 1995, 4 ECON-AIR chambers updated brand new in 2004, gas heated with MAXON burners, horizontal pin and clip chain, J-box entry, foulard, MAHLO weft streightener type RFMC 10-A from year 2001, cooling field, plaiter exit
General SKU366W1572 LocationBarneveld MakeKrahnen TypeAirflex 30 type 4 No.3405030 Year of construction2009 Main Features MaterialStainless steel Specified Features - Miscellaneous MaterialStainless steel Capacity470 mm MotorAir Information Total height1,12 m Weight69 kg CEcheck Floor space0,60x1,50 m ATEX compatiblecheck Extra SpecificationsSuction width 650 mm, brush width 470 mm, tank volume 21 l., dirty tank volume 25 l., air cap. 61-90 m3/h, suction cap. 148 m3/hMiscellaneousKrahnenMiscellaneous > MiscellaneousBrand > Krahnen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Stationary screw compressor with refrigeration dryer on 500 l container Specifications: Pressure 10 bar Volume flow 2000 l/min Voltage 400 V Drive power 15 kW Beh.-Vol. 500 l Weight 499 kg Noise 65 dB(A) Air outlet 3/4"i Dimensions (WxDxH) 1960x740x1725 mm Hint: ! without TÜV approval, container papers are not available
A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible.
Extraction and filtration of aerosols Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700m³/h pg: 1500 Pa U: 400 V F: 50 Hz I: 3.3 A tmax: 65 C More items - new and used - can be found in our shop! International shipping costs on request!
General SKU397X1160 MakeBoge LocationBarneveld CEcheck TypeC 15-2-LFR-500 Pressure Pressure buildup10 Bar Main Features Capacity2.25 m3/Min Motor30 KW Pressure10 Bar Specified Features - Blower Blowercheck 2x air compressor Capacity0,52-2,25 m³/min Motor2x 15 kW, 380 V, 3004 rpm Information No.5146436 / 5147193 Year of construction2020 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace2x 2,20 x 0,95 m Total height2,00 m Weight1600 kg Extra Specifications With control unit (as is), 2x Funke heat exchangers, Boge water/oil separator, type CC 10-2, 2x filter unitsBlowersBogeBlowers > BlowersBrand > Boge What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...
General SKU254S226 LocationBarneveld MakeHauck (USA) TypePBG 1000E-EE-VA-A air heater Main Features MaterialMild steel Specified Features - Miscellaneous MaterialMild steel Information Year of constructionUnknown Floor space4,3x2,2 M Total height2,1 M Weight2100 Kg Extra SpecificationsGas burner Hauck (USA), type: PBG 1000E-EE-VA-A, capacity 230 kW, type of gas: natural gas: With fan, brand: Karl Klein type: EMV 330/S (110 deg C), 110 m3/h: With 4x air blowers: 0.25 kW 230/400 Volt and with air heater: Leister LE 10000 HT 15kW + spare air blower. With board cabinet (as is). MiscellaneousHauck (USA)Miscellaneous > MiscellaneousBrand > Hauck (USA) What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...
General SKUR1083 MakeDynamic Air (USA) LocationBarneveld CEcheck TypeBella B320E-XN Main Features MaterialStainless steel Volume320 Ltr. Motor15 KW Specified Features - Paddle mixer MaterialStainless steel 1.4404 (316L) Paddle mixercheck Double shaftcheck Useful capacity320 ltr Trough sizes1325x1105x850mm With cover(2x) Inletdia. 260mm (1x) dia. 115mm (1x) dia. 100mm (1x) Outlet1200x160mm (2x) Glands air purgedcheck Motor15 kW 380-420/660-725 volt (2x) Speed mixing shaft112 rpm Information No.1096976 Year of construction2009 Floor space2,6x1,4 M Total height1,7 M Weight1000 KgPaddle mixersDynamic AirMixers > Paddle mixersBrand > Dynamic Air What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherl ...
Manufacturer : REHM Thermal Systems Model: VXS air 3500 (Type 734) Type: Convection Reflow Soldering Oven Quantity available: 2 units Condition: Used Key Specifications - Heating zones: 7 pre-heating zones / 3 peak zones / 4 cooling zones - Fan control: 1x top heating fan regulation - PCB width: 55 to 460 mm (with centre support from 65 mm), optional 508 mm - Chain pins: nickel-plated, 5 mm bolt length standard - Transport system width adjustment: manual (electric touchpad operation) - Heating: top and bottom heating - Display: flat screen and three-colour signal lamp - Control system: industrial PC with Ethernet network interface - Software: Vicon with Windows 10 Enterprise LTSC - Certification: CE compliant - Standby mode: Yes Find more here - / Contact us at -
Manufacturer Transtherm Cooling Industries Model TD90W/VEE-212/D Dry Air Cooler Year 2023 Condition Used Stock Number SBS20220469
Offer 26042 Operating hours 49500 h - Operating pressure 11 bar - Delivery rate 680 l/min. - Drive 400 V / 5.5 kW - Engine speed 2950 rpm - Air tank 200 L - Space requirement approx. W 600 x H 1600 x D 1000 mm - Weight approx. 250 kg
- Exhibition machine -For continuous air demand and intermittent operationElectronic control for reliability and efficiency.Increased flexibility thanks to two compressed air tanksHigh-quality and expandable equipment.Smooth and quiet. Due to temperature control of the oil, it can also be used in intermittent operation. Equipment DUO KKwith refrigerant dryer and fine filter as pre-filter upstream of the refrigeration dryerCondensate conditioner for oil - water separationAutomatic steam trap.---------- Technical data
Micro-blower instead of compressed air-driven nozzles, e.g., for installation in front of the inkjet coder for drying the coding area, all-aluminum housing, IP67 protection rating, integrated electronics, power consumption: max. 190 watts, compact, quiet (55 dB(A)) and efficient, flow rate at 43,000 rpm: min. 160 l/min, pressure: 119 mbar, optional power supply., This small and quiet 24-volt fan, IP67 rated, delivers incredible performance. See for yourself!, - Energy savings of up to 90% compared to compressed air applications, - Easy installation, - Only about 70 decibels, - Can also be used as a vacuum blower, Power consumption: max. 190 watts
An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible.
feed pressure: 10 bar Number of working hours: 69.551 / 38.921 h total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IHI TURBO OIL FREE COMPRESSOR, WATER COOLED Model : TRA20-235kW Origin : Fully Made in Japan Operating Condition Gas : Compressed Air Capacity : 40m³/min Suction Temperature : 35ºC (Design Point) Relative Humidity : 80% Discharge Pressure : 6barG Compressor Specification No of Stage : Three Output of Driver : 235 kW Voltage : AC415V / 50Hz / 3PH Noise Level : 85dB Starter System : Inverter Starter Cooling Water : Fresh Water Inlet Temperature : 32ºC Water Requirement : 35m³/h Dimensions L x W x H (mm) : 3,700 X 2,000 X 2,000 Weight : 7,100 kg
Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -Minimum height: 75 mm -Max. height: 95 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 230/180/H80 mm -Weight: 12.3 kg/piece
radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Total weight: 584 kg
Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece
Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -min. height: 75 mm -Max. Height: 90 mm -Price: per piece -Number: 6 piece -Dimensions: 245/110/H85 mm -Weight: 11.1 kg/piece
Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Stroke travel: 100 mm -Piston diameter: 80 mm -Piston rod: Ø 25 mm -Total length: 320 mm -Total length extended: 420 mm -Quantity: 2 available -Price: per piece -Dimensions: 96/96/H320 mm -Weight: 4.35 kg
Digestorium exhaust system for pharmacies, chemistry and medicine -Interior dimensions: 540/850 / H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Type suction: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg
Ventilation system, comfort compact ventilation, ventilation control, ventilation device control -Manufacturer: Aircool WGB control ventilation device -Type: unfortunately no exact type designation -Individual components: see photos -Quantity: 19x controls available -Price per piece -Dimensions: 380/240/H415 mm -Weight: 14.7 kg/pc.
Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece
Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 30 mm -Price: complete -Dimensions each: 145/145/H30 mm -Weight 1.7 kg/piece
Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc, leveling elements 2 pieces for machine tools and systems -Type: GLV 110 -Height: 25 mm -Shipping/Price: complete -Dimensions each: 125/125/H25 mm -Weight 1.2 kg/piece
Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc, machine feet (4 pieces) for machine tools and equipment -Type: GLV 110 -Installation height: 25 mm -Submission/Price: complete -Dimensions (each): 125/125/H25 mm -Weight 1.2 kg/piece
Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication
Atlas Copco GA10 air compressor (1994) with Atlas Copco FD30 refrigerant dryer (2002). Auction-ID: A3-43511-17020
Compressed air filter combination Atlas Copco PD 310+ QD 310+ Air flow rate 18,600 l/min Manufacturer Atlas Copco Type PD 310 + and QD 310 + Year of construction 2019 max. pressure 16 bar Delivery throughput 18,600 l/min Air connection 2 1/2\" lxwxh 45x17x78 cm Weight 22 kg Auction-ID: 047-DXU-3
Power: 22 kW (30 hp); VSD (variable speed drive) Operating parameters: Working pressure 4–13 bar (adjustable); FAD 0.72–4.00 m³/min (25–141 CFM); noise ~67–70 dB(A); operating hours 64,000 h; dim. 1,330 x 870 x 1,725 mm; wt. 516 kg Workpiece capacity: Industrial compressed air supply; variable demand applications Supported edges: N/A Edge types: Compressed air generation; drying (integrated dryer) Included equipment: Rotary screw compressor; VSD inverter control; integrated air dryer (full feature); air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2007; Manufacturer N/C Remarks: Used condition; high operating hours; energy-efficient VSD system for variable load operation 22 kW variable-speed rotary screw compressor with integrated dryer and adjustable pressure ran ...
\"The Atlas Copco AirPower GX4 FF industrial air compressor is designed to provide reliable and continuous compressed air flow in industrial and workshop environments. This Atlas Copco AirPower GX4 FF model ensures stable and efficient performance for feeding pneumatic tools, machines or automated systems. Offered as is, it is a robust solution for professionals wishing to integrate or recommission an industrial-grade air compressor. The compressor has 291 hours of work. With dimensions of 165 cm in length, 70 cm in width and 150 cm in height, and a weight of 190 kg, this compressor combines stability and compactness, making it easy to install and use. The Atlas Copco AirPower GX4 FF is therefore a reliable piece of equipment to ensure a high-performance and continuous supply of compressed air in various industrial environments.\" Auction-ID: A1-44765-335
Refrigeration dryer Atlas Copco FD 110 Air flow rate 6,600 l/min Manufacturer Atlas Copco Machine number CAQ 093483 Type FD 110 Year of construction 2003 max. pressure 13 bar Power consumption 1.4 kW Delivery throughput 6,600 l/min Refrigerant R 404 A Compressed air connection 1 1/2 inch Test run carried out lxwxh 81x70x81 cm Weight 122 kg Auction-ID: 047-DXS-3
Atlas Coco Compressor - GA 18 VSD ff - maintenance done in 2025 ️ General Description The Atlas Copco GA 18 VSD FF is a variable-speed (VSD) oil-injected screw compressor designed to deliver energy-efficient and reliable compressed air in industrial settings. \"Workplace / FF (Full Feature)\" version: Compact machine ready for use Integrated refrigeration dryer (dry air directly usable) ⚙️ Working principle Oil-injected rotary screw technology Variable speed drive (VSD) that automatically adapts the motor speed to the air demand Result: significant reduction in energy consumption ⚙️ Technical characteristics (typical GA 18 VSD FF) - Engine power: 18 kW (~25 HP) - Operating pressure: up to 13 bar - Air flow rate (FAD): up to ≈ 65 l/s - Noise level: ≈ 60–70 dB (low noise) - Power supply: 400 V three-phase - Integrated dryer: yes (FF) Equipment and technologies - Va ...
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
With refrigerant air dryer FD12244 Auction-ID: A1-44302-331
maximum number of results exceeded
please refine your search
500 € 
