We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,889 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
used
ATLAS COPCO FX 7 refrigeration dryer was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous for pipes and pneumatic tools. The ATLAS COPCO compressed air dryer is distinguished by its capacity of 3000 l/min, low compressed air consumption and a pressure dew point of +3°C, guaranteeing clean and dry air throughout its service life. The total weight of the device is 44 kg. Technical parameters of the ATLAS COPCO FX 7 refrigeration dryer - working pressure: 13 bar - pressure dew point: 3°C - capacity: 3000 l/min - pressure drop: 0.38 bar - connection: 1″ - maximum ambient temperature: 43°C - power: 1 kW - power supply: 230 V; 50 Hz - dimensions (L x W x H): 500 x 370 x 804 mm - weight of device: 44 kg
used
Variable speed drive. Volume flow 4.7 - 27.10 m3/min. at 7.0 bar.
used
Oven ATA Maxi temperature: 300° C Power: 1,5 kW Voltage: 380 V Internal oven dimensions: Depth 500 x W 295 x H 200 mm External dimensions: L 600 x H 560 x Depth 800 mm Weight: approx 80 kg
used
PROD. ATLASCOPCO TYP GA200 FF S/N APF225598 year 2018 (kW) 218 (m3/min) 36.1 (bar) 8.3
used
Hydraulic lifting crane with two supporter feet, and a turntable Splited telescopic cranehand, without hydraulic power supply. Manufacturer: ATLAS Load Capacity: 2,0 t Horizontal Reach: 6,0 m Reach height: 5,0 m
used
Variable speed drive. Volume flow 12.4 - 50.5 m3/min. at 7.0 bar. With built-in compressed air refrigerant dryer. Refrigerant R 404a. Air end 1x replaced.
used
Screw compressor make ATLAS COPCO type GA 310 PACKSer. -No: ABP718625Technical specifications:Output: 4.3 m3 / minMax. Performance: 10 barSpeed: 2925 rpm.Power: 30 kWWith- water separator- Flair / Delair DDA 24 dryer- Running time 44711 hoursused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Air Pressure: 40 // Delivery Rate: 1320
used
Air Pressure: 42 bar
used
feed pressure: 8 bar liter capacity: l total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Filter DDX 40 Part number: 2901121100
new
Filter PDx 40 Part number: 2901086400
used
PROD. ATLASCOPCO TYP G110 8.5 CE 400/50 IE3 S/N WUX411079 ROK 2015 MOC (kW) 113 WYDAJ. (m3/min) 18.8 CIS (bar) 8.5
used
PROD. ATLASCOPCO TYP GA90 S/N API621343 ROK 2015 MOC (kW) 90 WYDAJ. (m3/min) 16,48 CIS (bar) 8,5
used
Ultrasonic banderolier ATS US 2000 LD; good condition; cleaned and tested; Bandwidth 30mm; loop machine; soft voltage; fixed loop size; Sheet width 340mm; Arch height 180mm; Score 437,000. Ultra sonic banding machine ATS US 2000 LD; good condition; cleaned and checked; band width 30mm; loop machine; soft loop; fixed loop; arch width 340mm; arch hight 180mm; counter 437,000.
used
Ultrasonic banderolier ATS US 2000 LD; good condition; cleaned and tested; Bandwidth 30mm; loop machine; soft voltage; fixed loop size; Sheet width 340mm; Arch height 180mm; Meter reading 253,000. Ultra sonic banding machine ATS US 2000 LD; good condition; cleaned and checked; band width 30mm; loop machine; soft loop; fixed loop; arch width 340mm; arch hight 180mm; counter 253,000.
used
Air filter -Type: 1030 0979 00 -Dimensions: Ø 350/H360 mm -Weight: 4.5 kg
used
Hydraulic guillotine shear model Atlantic 3012 very good condition. - Year of manufacture - 1990. - Length of the cut sheet - 3000mm. - Max cutting thickness 12mm - The machine is equipped with an automatic bumper. - The machine has 1 set of spare original knives. - Weight 8000 kg.
used
Athader A 1503/17R Slitting Line Width : 1500 mm Maximum thickness : 3 mm
used
3 boilers 1 ton -2 rest -1 mixer 2 boilers, 2 tons - 1 rest - with 1 mixer double sided label machine Filling machine between 20-400 ml
CIP system, 2 x 200 litre tanks, new
used
pressure: 200 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke - stepless adjustable: 200 mm column arm: 300 mm table height: 1090 mm dayligth: 450 mm working feed: 9,0 mm/sec return speed: 80,0 mm/sec Control: NC ATL 550 hydraulic: 265 bar voltage: 380 V total power requirement: 18,7 kW weight: 15000 kg range L-W-H: 4400 x 1900 x 3000 mm Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 Positioning of backgauge ( X ) Depth setting positioning ( Y1+Y2 ) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, front left - electric backgauge, on ball screws with 2 stop fingers, manually adjustable - manual table crowning, with analogue display Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible Mul ...
used
ID2932 Atlas Copco ROC L6-44 year/Year of construction 2007 approx. 11860 hours/hours 21 t Blast hole drill, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, many accessories optionally available (drilling tube 89 x 5000 mm, Mincon 3.5 "MP35 down-the-hole hammer, ballistic drill bit D105 etc.), optionally with spare parts dispenser machine ( Engine damage), year of construction 2001 Blast hole drilling rig, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, optionally many accessories available (drill pipe 89 x 5000 mm, down-the-hole hammer Mincon 3.5 " MP35, drill bit D105 ballistic etc.), optionally with spare parts dispenser machine (engine damage), year of construction 2001
used
Vacuum Pump ATLAS COPCO Model. GHS350VSD+.
used
High pressure compressor Atelier Francois CE 68 A Ateliers Francois Compressor Model: CE 68 A SG40 Year of construction: 2005 Capacity: 35 m³/min Pressure: 40 bar incl. cooler and pressure vessel The machine is still installed and in operation. It can be visited on site during production.
used
High pressure compressor Atelier Francois CE 68 A Ateliers Francois Compressor Model: CE 68 A SG40 Year of construction: 2006 Capacity: 35 m³/min Pressure: 40-42 bar Electrical power: 355 KW incl. cooler and pressure vessel The machine is still installed and in operation. It can be visited on site during production.
used
Special attachment for lathes gt; for reworking crankshafts - this attachment can be fixed on top of the cross-slide - via a pneumatic cylinder the top part of the attachment can tilt op to allow the crankshaft to be installed in the chuck - once the crankshaft has been installed in the chuck of the lathe the top part can be closed and positioned around the area that needs to be reworked - once activated the tool insert of the attachment will start turning around the crankshaft to remove excess material. The chuck does not have to turn the crankshaft! The advantage of this concept is that the tool moves around the crankshaft - by doing this the least amount of stress is put on the crankshaft. This in contrast to the classic setup where the stationary tool is pressed into a workpiece being turned by the chuck of the lathe. Max dia of crankshaft: 330 mm
used
pressure: 230 t chamfer lenght: 5000 mm distance between columns: 4050 mm : 800 mm : 500 mm : 300 mm : 600 mm : BC 45 Grafik : 18,7 kW : 22,0 t : 6,0 x 2,2 x 3,75 m - 4 stop fingers - Crowning device - Adjustment of the finger height manually via crank 140 mm - Groove in the front of the table - various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
COMPRESSOR BRAND: ATLAS COPCO TYPE: GA 808 PACK PRESSURE: 8 BAR ENGINE 75 KW, BRAND: SIMENS.
used
ATLAS scissor lift table, lifting capacity 4 t German production table size 3000 x 1200 mm lifting capacity 4000 kg height of the unfolded table 1195 mm height of the folded table 450 mm pump motor power 4 kW table weight 1500 kg
used
Description Atlas Copco GA 90 VSD Screw compressor, speed-controlled WorkPlace Full-feature-(D)version, with water cooling Motor power 90 kW Drive motor IP 55, insulation class F high-efficiency gearbox Frequency converter max. operating overpressure 4-13 bar Volume flow 32-287 l/s GA 90 VSD Oil-water separator OSD 110 electronic condensate drain EWD boiler 3000 liters
used
weight max. in kg: 2000 kg fork length: 3500 mm stroke height: 200 mm weight: 700 kg dimensions: 4,0 x 0,6 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 230 t chamfer lenght: 3600 mm distance between columns: 3150 mm column arm: 300 mm table width: 200 mm dayligth: 450 mm stroke: 200 mm back stop - adjustable: 500 mm working feed: 7,0 mm/sec return speed: 80,0 mm/sec work height max.: 965 mm oil volume: 275 l Pressure power: 265 bar total power requirement: 18,7 kW weight of the machine ca.: 13300 kg. range L-W-H: 4100 x 2200 x 2670 mm Furnishing: - DELEM CNC control, model DA 56 (conversion in 2014) Pivoting control panel in front left - CNC electric backgauge (X axis) with 3x stop fingers, manually adjustable from the side - CNC pneumatic height adjustment of the stop fingers (R axis) - manual table crowning Adjustment by hand crank, with analogue display - 1x reversible MULTI V - universal die block - 1x complete set of upper tools - other / various application tools - free-moving 2hand/foot control The data for this ad ...
used
used
Description: Serial number: AP1434011 Operating voltage: 400 V Frequency: 50 Hz Connection. 30 kW Speed: 6000 rpm Volume flow: 5.58 m³/min Operating pressure: 12.75 bar Operating hours read: 3258 Approx. Onsite Dimension. (l x w x h): 1,300 x 1,000 x 1,600 mm, weight approx.: 600 kg
Description: Serial number: ITJ229298 Operating voltage: 230 V Frequency: 50 Hz Connection: 1.563 kW Incl. oil separator Approx. Onsite Dimension. (l x w x h): 900 x 700 x 1,000 mm, weight approx.: 150 kg
used
feed pressure:8 bar :Verd. 5050 min /1 voltage:400 V rated current:90 A total power requirement:46,5 kW weight of the machine ca.:1320 t dimensions of the machine ca.:1800 x 1600 x 2300 mm frequency:50 Hz Effizienz::7,4 m3/min IP::54 / 20
used
feed pressure:8 bar :Verd. 5050 min /1 voltage:400 V rated current:90 A total power requirement:46,5 kW weight of the machine ca.:1320 t dimensions of the machine ca.:1800 x 1600 x 2300 mm frequency:50 Hz Effizienz::7,4 m3/min IP::54 / 20
used
Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...
used
Coil Clamp 23.5 Ton
used
CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm
used
CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version
used
CNC unit for boring and routing Brand: Atemag Type: Function Line Extra with two tool interfaces angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 32 / ER 16 Spindle for omega router/ ER 16
used
CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever
used
Year of construction 2008 Inline Banding Machine Computer control with touch screen integrated conveyor belts Single and double benefits mobile substructure Price on request. We deliver and install worldwide!
used
CNC unit to machine material from underneath Brand: Atemag Type: Function Line Sotto Max. drive speed 12,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: cylindrical 10 mm Intervall operation required! Attention: price is just valid for standard version
used
CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch Pro With surface copying function with floating bell GX1 or GX2 or GX4 Max. drive speed 18,000 R.P.M Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 20 Nm Tool interface: modular for ER 25, ER 32, saw flange, shrink- fit chuck
used
CNC unit with oscillating cutter head Brand: Atemag Type: Function Line Soft Cutter Pro Max. drive speed 6.000 R.P.M Max. tool spindle speed 9.000 R.P.M. (Frequency 150Hz) Gear ratio i = 1:1,48 Torque max. 8Nm Amplitude: 4mm