at used for sale

Ato Rotopacker 3-tube with autom. Bag feeder Zipper 50/4000. Capacity 2400 bags per hour. On request with dedusting system and other accessories possible.

Wrapper

Height 1230 mm Width 980 mm Length 1330 mm Weight 820 kg Power supply: 400V 50Hz 3N Total power 31.1 kW Description Screw compressor Atmos SE 270, 400 V, 31.1 kW 8 bar 4.47 m3/min

Air filter -Type: 1030 0979 00 -Dimensions: Ø 350/H360 mm -Weight: 4.5 kg

Double hydraulic pump, oil pump, gear pump Manufacturer: ATOS -Rotor pump type: PFED-43056/022/1DTO -Shaft diameter: 22 mm -Number: 4 pumps available - Price: per piece -Dimensions: 175/325/H195 mm -Weight: 28 kg

sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm table height over floor: 900 mm cutting angle adjustment: 0,5 - 3 ° no. of strokes: 6 - 13 Hub/min back stop - adjustable: 1000 mm down holder: 18 St oil volume: 350 l total power requirement: 22,5 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Banding machine - desk model

- Year: 2007 - Engine: 15 hp (11 kW) - Maximum pressure: 7.3 bar

Key data: 160 , 8 , 1170

For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54129/029/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54150/085/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis: for forklifts -with: slewing ring -Wheel intake -Dwg. No:. 5.44.181 -1 piece Part No.: 01472 -1 piece Part No.: 01423 -Number: 2x landing gear available -Price: per piece -Dimensions: 290/290/H290 mm -Weight: 32 kg

Key data: 250 , 8 , 2322

For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg

CNC unit to machine material from underneath Brand: Atemag Type: Function Line Sotto Max. drive speed 12,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: cylindrical 10 mm Intervall operation required! Attention: price is just valid for standard version

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1405 rpm -Shaft: Ø 28 mm -Design: B3 -with extra cooling fan -Protection class: IP 55 -Dimensions: 410/260/H195mm -Weight: 20kg

Three-phase motor with 2 speeds, electric motor -Power: 1.3/3.8 kW -Speed: 975/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 44 -Price: per piece -Number: 5x available -Dimensions: 330/232/H200 mm -Weight: 18.8 kg

Skid with a triagi reactor manufactured by ATTP in stainless steel, model MTA-250, with agitation and a volume of 250 liters, and 2 lung tanks with agitation. The reactor engine has a power of 7.5 kW, and the tank engines 1.5 kW. Volume Total capacity 250 L Material 316/316L stainless steel Jacket or half-coil material To be determined Stainless steel Technical features Model MTA-250 Year of manufacture 2018 Equipment configuration Agitator Transport information Length 5000 mm Width 2300 mm Height 2820 mm Condition That's how it is Made by Unknown

Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Shovel length closed: 1400 mm -Total height: 2200 mm

Manufacturer: Bauknecht ATB, Type: 0V16/220, Model: 904431, Serial number: 738256, mH/Hz: 100 Hz, Output DC Volt: 3 x 220 V, Imax= Ampere: 16 A,

Manufacturer: Atlas Copco, Type: GA 45, Year: 1991, Volume flow m³/min: 5,94, Drive power kW: 45, Drying unit: yes, Compressed air min/max bar: 10, Year :1991

Manufacturer: Atlas Copco, Type: GA 55, Year: 1991, Control: Atlas Copco, Schraubenkompressor: yes, Running idle houres: 69200, Volume flow m³/min: 7,5, Verdichtungsenddruck bar 1: 12, Hauptläuferdrehzahl U/min 1: 2850, Antriebsleistung kW 1: 55, Year :1991

Electric motor, three-phase motor -Power: 5.0 kW -Speed: 1445 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 445/330/H250 mm -Weight: 60 kg

Manufacturer: Biesse, Type: Arrow ATS BAZ 3, Year: 2003, Control: Biesse, Working range X: 3000, Working range Y-axis: 1500, C axis: no, Pendulum processing: yes, Number of milling spindles: 0, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 20, Drill vertical Y: 15, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Year :2003

Electric motor, three-phase motor with 2 speeds -Power: 2/6 kW -Speed: 965/1455 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 480/320/H260 mm -Weight: 69 kg

Three-phase motor with 2 speeds, electric motor -Power: 7/20.5 kW -Speed: 975/1460 rpm -Shaft: Ø 48 mm -Construction: B3 -pole changing -Protection class: IP 54 -Dimensions: 690/430/H360 mm -Weight: 186 kg

Electric motor, three-phase motor with 2 speeds -Power: 3/9 kW -Speed: 960/1450 rpm -Shaft: Ø 42 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Quantity: 1 available -Dimensions: 585/320/H390 mm -Weight: 110 kg

sheet width: 3050 mm plate thickness: 13 mm weight of the machine ca.: 8 t distance between columns: mm total power requirement: kW dimensions of the machine ca.: m motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3529 Atlas Copco XRHS366CD year/Baujahr 2006 approx. 4370 hours/hours Compressor with 20 bar and 20 m3/min Compressor with 20 bar and 20 m3/min

Seam reaming and tape laying machine

Drying tunnel for pinched shafts/ strobe and inserted shafts

Gear motor, electric motor, three-phase motor -Speed: 141 rpm -Power: 0.37 kW -Construction: B3 angle -Shaft: Ø 18 mm -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 320/143/H220 mm -Weight: 9.6 kg

Three-phase motor, electric motor, gear motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 480/310/H320 mm -Weight: 52 kg

2 independently working cutting bridges 2 working zones (1750x1000mm each) High-performance vacuum turbine X servo drive; Y and Z axes 2 high-luminosity projectors Windows 7 operating system Calculator with CNC interface, modem and Ethernet card

Description hopper capacity: 30 Lt temperature range: 0 ° -140 ° C power: 3 Kw 400 V power supply

Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Power: 16 A -Input: 220V -Output: 3x 0-220 V -Output frequency: 0-100Hz -Quantity: 1 piece available -Dimensions: 300/270/H110 mm -Weight: 4.2kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 16 A -Input: 220 V -Output: 3x 0-220 V -Output frequency: 0-100 Hz -Number: 1x converter available -Dimensions: 300/230/H110 mm -Weight: 3.6 kg

Description Automatic Coiler Twin coiler Max. external diameter of coil is 800 Twin binder Pipe cutter

Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible.

Ulma Atlanta flowpacker, -

width: 33 mm bolt-diameter: 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4" - Weight: 239 kg Find more here - / Contact us at -

There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22 ...

Electric motor, three-phase motor -Manufacturer: ATB, electric motor 80S 3327277-056 -Type: TAF 0.55/4-7 -Power: 0.185 KW -Speed: 1400 rpm -Shaft: Ø 20 x 60 mm -Type: B5 -Protection class: IP44 -Dimensions: 230/148/148mm -Weight: 8.1 kg

A semi-automatic mobile stretch wrapping machine is available. Pallet dimensions X/Y min.: 600mm/600mm, max. packaging output: 65m/min, wrapping height: 2000mm, max. film carriage speed: 5.4m/min, total output: 0.55kW, output: 35 pallets/h. The battery is defective. Documentation available. On-site inspection is possible.

Volume: 250l, max. operating pressure: 11bar, outer diameter: 450mm, stand height: 1800mm, medium temperature min./max.: -10°C/120°C. Documentation available. On-site inspection is possible. The machine is unused and as good as new.

Position computer, computer, control unit, robot controller, controller -Manufacturer: Pilz, AT-Industriecomputer -Type: P10-ATW VGA 304512 -Dimensions: 310/250/H165 mm -Weight: 4.4 kg

An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible.

An Atlas Copco oil-free compressor is available.Technology: oil-free scroll compression, max. operating pressure: 7.8bar, volume flow: 13.4l/s or 48.2m³/h, motor power: 7.4kW, speed: 2885rpm, machine dimensions X/Y/Z: approx. 1600mm/750mm/1850mm, machine weight: approx. 400kg.

Rotary atomizer, nominal process gas flow rate: approx. 100 kg/h, water evaporation capacity: between 0.5 and 6 kg/h, inspection by appointment.

A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible.