137,081 used machines on RESALE, but how to find them? Machine Search
LWA (Laurijsen WeegAutomaten) Atoma E233 Technical data Construction data: Machine type : Atoma E233 Weighing range : Weighing speed : up to 15 weighings per minute The following products can be processed on the automatic weighing machine: General dimensions: Overall dimensions W x D x H : 2,000 mm x 650 mm x 1,100 mm Total weight: approx. 500 kg Required power supply: Supply voltage : 230 V alternating current Control voltage : 24 V direct current Operating pressure : 4 to 6 bar Protection class : IP 65 Mains earthing : for example TN system Frequency : 50 Hz +/- 1 % continuous operation +/- 2 % short time Physical operating conditions: Ambient temperature, in operation : +10 to +40 degrees Celsius Relative humidity (RH) : 30% to 85%, non-condensing Lighting : normal ambient lighting. Altitude : up to a maximum of 1000 metres above sea level. Find more here - .ucy ...
Electric motor, three-phase motor with 2 speeds -Power: 3/9 kW -Speed: 960/1450 rpm -Shaft: Ø 42 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Quantity: 1 available -Dimensions: 585/320/H390 mm -Weight: 110 kg
Gear motor, electric motor, three-phase motor -Speed: 141 rpm -Power: 0.37 kW -Construction: B3 angle -Shaft: Ø 18 mm -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 320/143/H220 mm -Weight: 9.6 kg
Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons
Banding maretial PW8030150 white paper 40 rolls and PB7030150 brown paper 40 rolls. Banding maretial PW8030150 paper white 40 rolls and PB7030150 paper bouwn 40 rolls.
Atlas Copco ZT30 Air compressor Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank
Key data: 73 , 3
Screw compressor, 500 V drive, serviced
Three-phase motor, electric motor, gear motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 480/310/H320 mm -Weight: 52 kg
Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Power: 16 A -Input: 220V -Output: 3x 0-220 V -Output frequency: 0-100Hz -Quantity: 1 piece available -Dimensions: 300/270/H110 mm -Weight: 4.2kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 16 A -Input: 220 V -Output: 3x 0-220 V -Output frequency: 0-100 Hz -Number: 1x converter available -Dimensions: 300/230/H110 mm -Weight: 3.6 kg
Ultrasonic Banderolier ATS US 2000 AST-MDM; cleaned and tested; Frame size 900x750mm; Belt width 30mm; suitable for paper (also suitable for TruePaper paper) or foil; Meter reading 795,000 thousand; Compressed air required. Ultrasonic banding machine ATS US 2000 AST-MDM; cleaned and checked; frame size 900x750mm; band width 30mm; used for paper (also for TruePaper material) or foil; counter 795,000; pressurized air needed.
Ato Rotopacker 3-tube with autom. Bag feeder Zipper 50/4000. Capacity 2400 bags per hour. On request with dedusting system and other accessories possible.
Height 1230 mm Width 980 mm Length 1330 mm Weight 820 kg Power supply: 400V 50Hz 3N Total power 31.1 kW Description Screw compressor Atmos SE 270, 400 V, 31.1 kW 8 bar 4.47 m3/min
sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm table height over floor: 900 mm cutting angle adjustment: 0,5 - 3 ° no. of strokes: 6 - 13 Hub/min back stop - adjustable: 1000 mm down holder: 18 St oil volume: 350 l total power requirement: 22,5 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 160 , 8 , 1170
For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037
Key data: 250 , 8 , 2322
For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg
Manufacturer: Biesse, Type: Arrow ATS BAZ 3, Year: 2003, Control: Biesse, Working range X: 3000, Working range Y-axis: 1500, C axis: no, Pendulum processing: yes, Number of milling spindles: 0, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 20, Drill vertical Y: 15, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Year :2003
CNC unit to machine material from underneath Brand: Atemag Type: Function Line Sotto Max. drive speed 12,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: cylindrical 10 mm Intervall operation required! Attention: price is just valid for standard version
sheet width: 3050 mm plate thickness: 13 mm weight of the machine ca.: 8 t distance between columns: mm total power requirement: kW dimensions of the machine ca.: m motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric motor, three-phase motor -Manufacturer: ATB, electric motor 80S 3327277-056 -Type: TAF 0.55/4-7 -Power: 0.185 KW -Speed: 1400 rpm -Shaft: Ø 20 x 60 mm -Type: B5 -Protection class: IP44 -Dimensions: 230/148/148mm -Weight: 8.1 kg
Position computer, computer, control unit, robot controller, controller -Manufacturer: Pilz, AT-Industriecomputer -Type: P10-ATW VGA 304512 -Dimensions: 310/250/H165 mm -Weight: 4.4 kg
Skid with a triagi reactor manufactured by ATTP in stainless steel, model MTA-250, with agitation and a volume of 250 liters, and 2 lung tanks with agitation. The reactor engine has a power of 7.5 kW, and the tank engines 1.5 kW. Volume Total capacity 250 L Material 316/316L stainless steel Jacket or half-coil material To be determined Stainless steel Technical features Model MTA-250 Year of manufacture 2018 Equipment configuration Agitator Transport information Length 5000 mm Width 2300 mm Height 2820 mm Condition That's how it is Made by Unknown
We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4 - Weight: 239 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines
Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg
A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible.
Diaphragm pump, centrifugal pump, water pump, chemical pump, compressed air-operated diaphragm pump -Manufacturer: Tapflo, air-operated diaphragm pump type TX70 ATS-ALP -Flow rate: approx. 78 l/min -Delivery pressure: max. 8 bar -Quantity: 1 piece available -Dimensions total: 210/170/H235 mm -Weight: 7 kg/piece
High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.
Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Atlanta, gearbox type 58 83 209 -Translation: i= 9.25 -Shafts: Ø 25 x 135 mm / Ø 15 x 28 mm see photos -Dimensions: 220/137/H165 mm -Weight: 7.3 kg
High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit with hydraulic tank from vertical lathe Scherer VDZ 80 DS -Motor: ATB 0.5 kW / 2820 rpm -Individual components: see photos -Dimensions: 360/190/H540 mm -Weight: 14 kg
Atom cart beam punch with 25t. The machine is fully functional.
Manufacturer: ATLAS COPROD Model: ROC - L7(40) CR Year of Manufacture: 2008 Engine Hours (Old engine) : 8,043 - New reconditioned engine was installed recently. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Offer 25227 Specifications: - Pressure capacity 150 t - Working width 3600 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2300 x D 1600 mm - Weight approx. 8700 kg - with: - Swivel arm – control panel with ATL 550 control - For crimping depth + backgauge -Mot. Backgauge - Crowning device - Lasersafe FIESSLER - 4-fold universal die, split sharpening tool + deer's foot tool - Two-hand control panel, foot switch,
used
TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC)TIG Welding MachineFabr. No. 0907036 Year of construction 2007Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% EDL power electrode 140 Amp. = 35%EDNetz connection 230 Volt, 50 Hz.- DC and AC welding- HF- ignition- Stepless power adjustment- 2-stroke and 4-stroke welding operation- Pulse welding mode- Rod electrode operating mode- 8 meter hose package with TIG torch- Shielded gas pressure reducer-
electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor 100L Ex-protected -Type: EAY 100L/4C-12 -Power: 2.5 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP54 -Dimensions: 365/250/H205 mm -Weight: 25 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg
Centrifugal fan NICOTRA - Gebhard type P2M-M3M4J-RRB-ATEX RD/0Fabr. No. 318844/626052/1 Year of construction 2008Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³Air inlet 500 mmAir outlet 450 x 450 mmEngine speed 1435 rpm. Motor power 4 kWNet connection 400 Volt 50 Hz- Fan wheel with 8 fan blades- Directly flanged drive motor- Mounted adapter ring with flex sleeve 500 mm- Adapter flange for air outlet from rectangular flange 450 x 450 x to 500 mm- Galvanized
Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg
Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg
MEPAL ATLANTIS C3SR profile machining center was built in 2018 in Italy by MEPAL Italia s.r.l (RobTech). The machine is new, stocked after purchase and has never been in operation. MEPAL ATLANTIS C3SR is an advanced CNC machining center designed for precision machining of aluminium and PVC profiles from three sides. It is designed to perform such operations, i.e. drilling and milling of workpieces with a maximum wall thickness of 2.5 mm and lengths in excess of 3 metres. All these processes are performed fully automatically in three numerically controlled axes (X,Y,Z). Inside the large work area there is a rotary work table, which is pneumatically rotatable within the range of -90°, 0° and +90°. This solution allows workpieces to be machined from different sides without having to refit the workpiece. The spindle, driven by a powerful 4.5 kW motor, reaches a speed of as much as 1800 ...
Key data: 132 , 40 , 750
Year of construction 2015 Capacity: 750 m³/min. Delivery pressure: 40 bar Rotation speed 330 rpm. Electric motor 132 kW incl. refrigeration dryer The PET compressor is in mint condition, with few operating hours
Second Hand Atlas Copco GA250VSD 250 kW with 10 bar and 44.90 m3/min. Year of manufacture 2018 with around 34,000 hours
Second Hand Atlas Copco GA315VSD. 315 kW with 8.5 bar and 58.50 m3/min. Year of manufacture 2019 with around 36,000 hours
Second hand oil-free Atlas Copco ZR132. 132 kW with 7.5 bar and 19.10 m3/min. Water-cooled. Built in 2010 with around 39,000 hours.
cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.36 m, Overall length= 1.65 m, Overall width= 3 m, Net weight= 300 kg,
maximum number of results exceeded
please refine your search
