at used for sale

We offer a top 3D scanner from GOM here GOM ATOS IIe Rev.01 Completely ready to connect with all cables Unfortunately, a password is assigned on the PC, but the software is included on CD Different sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x Set 1000x800 Complete PC from GOM in an aluminum case with software Linux completely ready for connection for GOM ATOS IIe Software on CD Steel Scalebars with ATOS Evaluation Dongle Replacement lamp Calibrations Panel (Aluminum) CP20/MV 350x280mm² If you have any further questions, please feel free to contact us!

Re circulation pump, used Horizontal type NPR 500 system KÖSTER Manufacturer Ritz Atro Built in 1992 Temperature of pumped liquid of 40 ° C Flow 240 l / s Pumping height 1.00 m Power 3 kW Pump speed 480 min Direction of rotation of the impeller left TMU submersible motor drive type Performance of the drive machine 4 kW Installation type horizontal Sufenzahl 1 Axial impeller shape Number of propeller blades 5 adjustable More info and photos on request.

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Hydraulic press manufactured in 2014. This WIS ATEVI Druckgeber ATeVi Heidel features a ram stroke of 800 mm and a closing force of 500 kN. It has a machine weight of 19,500 kg and includes a Siemens S7 control system. If you are looking to get high-quality hydraulic pressing capabilities, consider the WIS ATEVI Druckgeber ATeVi Heidel machine we have for sale. Contact us for further details.

Used packaging machine from Chotyńske Strojirny ATIP s. r. o., type ATIP 7500. New: 2018. Three-row filling machine with an 8-position rotary table designed for automatic filling of liquid and paste-like substances with the possibility of filling one cup with up to three ingredients. Filled products: cottage cheese, bryndza, yoghurt, cream, kefir, milk, cottage cheese creams, thermomixes, frozen creams, condensed cheeses, spreadable butter, whipped cream, beverages, alcohols, pâtés, salads, mayonnaise, mustard, etc.

General SKU065E266 MakeNiro TypeAtomizer F-60 BBE 16 No.1122 Mounted on framecheck Main Features MaterialStainless steel Motor44 KW Inlet diameter210 mm Specified Features - Spray dryer Spray dryer:Rotary atomiser for spray dryer: (1x) With rotary atomisercheck Atomiser dia.160 mm Motor44 KW, 500 Volt (2940 rpm) MaterialStainless steel General LocationBarneveld Floorspace1,0 x 1,0 m Total height2,8 m Weight1050 kgPowdered foodsGeneric medicinesFine chemicalsStarchBiotechnologySpray dryersCatalysts & fillersFeed additivesDiscountCosmeticsDairySolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicNiro AtomizerIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyDryers > Spray dryersIndustries > Chemical > Catalysts & fillersI ...

Type / type: ATSL 3013 Fabr./ make: Atlantic Year of construction/ year: 1992 Stock number: 0969 Sheet thickness with largest sheet width/ thickness at max. cutting length: 13 mm ( mild steel ) 6 mm ( stainless steel / high grade steel) Cutting length: 3050 mm Weight/ weight: approx. 8.6 t Specification: Backstop

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg

Offered for sale is an Atlantic guillotine shear. Cutting length: 3000mm, max. cutting thickness: approx. 6mm. Documentation available. An on-site inspection is possible.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure booster cylinders, hydraulic cylinders for guillotine shears -Hydraulic cylinder: from Atlantic ATS 3006 guillotine shear -Piston rod: Ø 40 mm -Stroke: 200 mm -Hole: Ø50 mm -Pitch spacing: retracted 725 mm -Dimensions: 850/130/187 mm -Weight: 32.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure booster cylinders, hydraulic cylinders for guillotine shears -Hydraulic cylinder: from Atlantic ATS 3006 guillotine shear -Piston rod: Ø 50 mm -Stroke: 220 mm -Hole: Ø50 mm -Pitch spacing: retracted 555 mm -Dimensions: 675/140/196 mm -Weight: 37.3 kg

sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm table height over floor: 900 mm cutting angle adjustment: 0,5 - 3 ° no. of strokes: 6 - 13 Hub/min back stop - adjustable: 1000 mm down holder: 18 St oil volume: 350 l total power requirement: 22,5 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment.

sheet width: 3050 mm plate thickness: 13 mm weight of the machine ca.: 8 t distance between columns: mm total power requirement: kW dimensions of the machine ca.: m motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4050 mm, 6 mm

Year of construction 1988 Cutting length 4050 mm Cutting capacity 6 mm Weight approx. 8500 kg Knife renewed about a year ago.

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3460 mm table height: 800 mm 0: 220 bar cutting angle adjustment: 0,5x3 ° down holder: 18 back stop - adjustable: 750 mm front stop - adjustable: 1000 mm main drive: 7,5 kW oil volume: 300 l total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,7x2,0x1,8 m cutting angle adjustment manually blade gap adjustment manually angle stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Banding Machine - desk model

A guillotine shear is offered. Cutting length: 3000mm, cutting capacity steel: 2mm - 6mm, cutting capacity stainless steel: 3mm. Equipped with back gauge, front support tables, finger protection guard. Inspection possible by arrangement.

sheet width: 3050 mm plate thickness: 12.0 mm ST plate thickness: 8.0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0.5 - 3.0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Control: SP 8 total power requirement: 22.5 kW weight: 8500 kg range L-W-H: 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition () Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system SP 9 in like-new condition backgauge pre-selection positioning digital display of actual value electro-hydraulic cutting angle adjustment with digital display emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual  ...

sheet width: 3050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 0.5 - 3.0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: max. 750 mm Control: konv. engine output: 10.0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm maintained condition () Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x robust side stop - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 13 mm total power requirement: kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: m - thickness at max. cutting length: 13 mm (mild steel 6 mm, high grade steel) - Specification: - backstop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. - Back gauge 10 - 750 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space required including back gauge, without front support arms - approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - with: - E. - Foot - Switch - Cut line illumination

Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. Back gauge 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - with: - E. foot switch - Cut line illumination

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range ...

ATMOS PDS PDP 35 towable air compressor was built by ATMOS Chrást s.r.o. in the Czech Republic in 2021. The machine is used wherever top-quality compressed air is required. Its components from renowned European brands ensure the highest possible energy efficiency throughout its entire service life. The compact design based on a single-axle trailer, in turn, allows operation in all conditions, both at low and high temperatures. The ATMOS PDP 35 diesel air compressor weighs 768 kg. The machine has only been used for 350 hours and is in very good condition. At 250 operating hours a service was performed. Technical specifications of the ATMOS PDS PDP 35 rotary screw compressor - motor power: 35.7 kW - working pressure: 7 bar - maximum capacity: 5 m3/min - power source: combustion engine - operating hours: 350 h - weight of the ATMOS machine: 768 kg

Complete powder plant existing out of Evaporator (4-effect, TVR), Spray Dryer, Fluidbed Dryer, 2x Crystallization Tanks and a Big Bag Filling Station. Previously used for skim milk / whole milk / whey / permeate or 35% protein powder. Still mounted on its original postion inside the factory in Spain. Line per direct available., Infeed capacities evaporator:, - Skim milk: 7.200 kg/h @ 9% TS., - Whole milk: 4.800 kg/h @ 12,5% TS., - Whey: 8.150 kg/h @ 6% TS., - Permeate: 8.835 kg/h @ 4,5% TS., - 35% Protein: 2.880 kg/h @ 10% TS., - Water for startup and CIP: 10.000 ltr/h @ 2 bar., - Water for cooling seals in vacuum pumps: 7.000 ltr/h @ 25 °C - 2 bar, demineralized., - Water for safety / firefighting should be available at 7.000 ltr/h @ 2 bar., - Water for condenser cooling: 30.000 ltr/h @ 28 °C - 2 bar., - Ice water for flash system: 2.000 ltr/h @ 3 °C - 2 bar., - Saturated dry steam:  ...

Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.

Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.

Ultrasonic Banding Machine ATS US 2100 AB; tested and maintained by ATS Germany support; Belt width 75mm; Frame 430x205mm; 2-fold print mark control for printed material; fixed strap length adjustable; Arc air; suitable for paper or foil. Ultra sonic banding machine ATS US 2100 AB; checked by the support of ATS Germany; band width 75mm; frame 430x205mm; Double Print Mark Reader; fix band lenght possible; airing for the frame; used for paper or foil.

Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 550kg, operating hours: approx. 69000h. 2) Oil lubricated screw compressor Atlas Copco GA15, year of manufacture: 1998, max. operating pressure: 13bar, power: 15kW, max. air flow: 155m³/h, machine dimensions X/Y/Z: approx. 1900mm/700mm/1600mm, weight: approx. 400kg, operating hours: approx. 69000h. 3) Oil lubricated screw compressor Atlas Copco GA15 for spare parts. Documentation available. An on site inspection is possible.

Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout d ...

FOR SALE – 2 OIL BOILERS IN 40 FT CONTAINERS – COMPLETE "PLUG & PLAY" PACK NEGOMAT INDUSTRIE offers 2 Atlantic Guillot LRR 49 boilers mounted in 40-foot insulated containers, fully equipped and never put into service. Ideal solution for temporary boiler rooms, industrial back-up or heating networks. ⚙️ Technical characteristics • Brand: Atlantic Guillot • Model: LRR 49 • Year: 2009 • Power: 1,400 to 1,650 kW • Max temperature: 110 °C • Water pressure: 6 bar • Burner: Weishaupt L8Z/2 • Burner power: 620 to 3,155 kW • Fuel oil: max consumption 265 kg/h • Electrical power: 5.82 kW • Condition: used equipment never used Comprehensive equipment • Insulated 40 ft container • Boiler + burner mounted and wired • Integrated hydraulic + electrical connections • Control box + regulation • Lighting + security • 100% plug & play  ...

Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm Isbmrc Iporp D Uxenjtf width: 1600mm height: 2000mm weight: 4400 kg

Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023 Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Atomizer manufactured by NIRO ATOMIZER in 304 stainless steel, model F10. Material Stainless steel Technical characteristics Model F10 Status In your state Manufactured by NIRO ATOMIZER

Atlas CW650APS Film Slitting Rewinding Machine Atlas CW650APS Slitting and Rewinding Machine • Model: CW650APS • Year of Manufacture: 2012 • Condition: Maintained in excellent condition • Designed for: BOPP and other flexible films (12–50 µm) • Rewind Stations: 30 • Core Sizes: Automatic core loading Technical Specifications • Unwind System: Shaftless, web width 3600 mm • Maximum Mechanical Speed: 800 m/min • Slitting Width: 110–400 mm • Maximum Rewind Diameter: 500 mm Features • Fully automatic unloading system, including robot for placing reels on pallets • Razor slitting and two trim rewind stations • Automatic positioning of rewind arms and blade holders • Precise web guiding for continuous high-speed operation • Optimized for efficient and safe production We have a few Atlas Film Slitting & Rewinding Machines availa ...

TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. GA 55 AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9,1 bar. - 131psi VOLTAGE 440V 60Hz P motor 55kW 75hp YOB 2010 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO MAS GA 37 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. MAS GA 37. AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9.1 bar. - 131psi VOLTAGE 440V 60Hz P motor 37kW 50hp 2010 YOB MADE IN. BELGIUM IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO GA 55 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Manufacturer: Atlas Copco, Type: GA 55, Year: 1991, Control: Atlas Copco, Schraubenkompressor: yes, Running idle houres: 69200, Volume flow m³/min: 7,5, Verdichtungsenddruck bar 1: 12, Hauptläuferdrehzahl U/min 1: 2850, Antriebsleistung kW 1: 55, Year :1991

We offer used as it is where it is: SUNTEST XXL+ FD Atlas SUNTEST XXL+FD is an extra-large light stability test chamber : Information provided by the manufacturer on its webpage without guarantee: Light stability testing of Consumer Goods and Packaging The Atlas SUNTEST XXL+FD is an extra-large light stability test chamber especially tailored towards the needs of consumer goods, food and beverage testing. Its 3000 cm2 flatbed exposure area and tall chamber height is best-in-class for 3-D specimens testing and can accommodate all types of bottles and packaging. The SUNTEST XXL+FD is used to determine the light stability of new ingredients, products or packaging for food, beverages, or other FMCG (fast moving consumer goods) applications. It’s also extremely useful to perform highly accelerated shelf-life tests (ASLT) within days. A powerful chiller guar ...

Inv. Num. : 4368 Type: Comact Scan 2M Producer: ATOS Created: 2013 Parameters: Software: ATOS v7.5 Stack height: 1.8 mm Machine arm: 0.9 mm Swivel head: Foba Superball M-1 Notebook: Dell Precision M4700 Equipment: 1x Silver License Key 1x Remote Control 1x original notebook 1x bag with PC 1x Stand 2x Suitcase 3x Folders

Hydraulic cylinder for ATLAS loader crane Stroke 750 mm Piston rod 125 mm Outer diameter cylinder tube 235 mm Piston diameter approx. 200 mm Length retracted center - center bolt 1,100 mm Bolt diameter cylinder tube 80 mm Width of the mount 245 mm Bolt diameter 100 mm Both bolt mounts with plain bearings Spare part number original Atlas 4189526 Width of the piston rod holder 130 mm Weight approx. 330 kg / piece Original price approx. € 9,500,-- -New- - 2 pieces in stock - price per piece -