at used for sale

Te koop Siemens gas analyzer PTB 08 ATEX 1008X Type: PTB 08 ATEX 1008X Aantal: 1 Order number: 4341.18 Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459 De nu kopen prijs is excl. 21%btw Voor internationale verzending prijs aanvragen

Oil-free screw compressor Atlas Copco ZR90 90 kW 7.50 bar 14 m3/min Year of Make: 2012 Hours: 5735

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 2200 mm   Y-axis travel: 1600 mm   Z-axis travel: 1850 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° TABLE   table surface (left-right): 1000 mm   table surface (front-back): 1250 mm   workpiece load (max): 5000 kg SPINDLE / HEAD   spindle revolutions (min): 20 /min   spindle revolutions (max): 10000 /min AXIS DRIVES   rapid traverse: 40000 mm/min TOOL MAGAZINE   number of positions: 60   tool diameter max.: 110 mm   - with free neighbour positions: 250 mm   tool length max.: 450 mm   tool weight max.: 35 kg AUTOMATIC WORKLOAD EQUIPMENT   number of store positions: 2 ELECTRICAL SPECIFICATIONS   mains power supply: 130 kVA   mains voltage: 400  ...

Used Atlas Copco FX6 Refrigeration Dryer 2.34 m3/min 14 bar Year of Make: 2019

pressure: 100 t Working width max.: 300 mm serial number: 55505 voltage: 380 V weight: 5000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 12.0 mm ST plate thickness: 8.0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0.5 - 3.0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Control: SP 8 total power requirement: 22.5 kW weight: 8500 kg range L-W-H: 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition () Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system SP 9 in like-new condition backgauge pre-selection positioning digital display of actual value electro-hydraulic cutting angle adjustment with digital display emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual  ...

plate thickness: 5 mm cutting length: 3000 mm rear stop: 750 mm total power requirement: 7,5-10 kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ATLAS COPCO GA11 FF with integrated refrigeration dryer Load hours approx. 16000 Pressure: 7.5 bar

pressure: 300 t chamfer lenght: 4100 mm distance between columns: 3710 mm stroke - stepless adjustable: 250 mm column arm: 330 mm dayligth: 500 mm table height: 940 mm table width: 250 mm working feed: 7.0 mm/sec return speed: 90.0 mm/sec Control: konv. operating pressure: max. 305 bar voltage: 380 V total power requirement: 22.5 kW weight: 25200 kg range L-W-H: 4320 x 2100 x 3370 mm well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) with analog position display - 1x split set of 85° deer foot ...

sheet width: 3050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 0.5 - 3.0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: max. 750 mm Control: konv. engine output: 10.0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm maintained condition () Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x robust side stop - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 13 mm total power requirement: kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: m - thickness at max. cutting length: 13 mm (mild steel 6 mm, high grade steel) - Specification: - backstop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 3100 mm distance between columns: 2600 mm throat: 250 mm dayligth: 325 mm piston stroke: 120 mm table height: 875 mm ajustment speed: 70.0 mm/sec working feed: 9.0 mm/sec return speed: 60.0 mm/sec pressure: 220 bar Control: ATL 550 total power requirement: 5.6 kW weight: 8400 kg range L-W-H: 3500 x 1700 x 2240 mm from a maintenance workshop very good / well-maintained condition () Equipment: - simple NC electro-hydraulic press brake with torsion shaft - ATLANTIC NC control ATL 550 Positioning of the backgauge (X) Positioning of the depth adjustment (Y1 Y2) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, front left - NC electro-motorized backgauge (X axis) 2x manually adjustable stop fingers - 1x set of split roe foot upper tools - 1x rotating universal die block - 1x freely mo ...

ATLAS COPCO ZR 55 VSD is a Schraubenkompressor, entwickelt für präzise Leistung, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Max. Arbeitsdruck 8,35 bar, Liefermenge 139 l/s. Technische Daten: Anschluss 400 V, installierte Leistung 55 kW; Gewicht ca. 1880 kg; Abmessungen L2400×B1020×H1870 mm. Erreicht enge Toleranzen; geeignet für Automotive, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 -Pressure: max. 11 bar -Dimensions: 315/200/H500 mm -Weight: 22.2 kg

Pressure and differential pressure switches, transmitters, monitors, sensors, differential pressure indicators, differential pressure switches -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 4 ADS-10 -Pressure: max. 25 bar -Quantity: 2x P/N 1089 0416-01 / 1x P/N 1089 0416-02 (see photos for connections) -Dimensions: 125/105/H85 mm -Weight: 0.9 kg/pc.

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air reservoir -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l -Operating pressure: 11 bar -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. ...

This PET bottle packaging machine was in operation until 2025 on a bottling line for mineral water in PET bottles and was used to pack cartons of both 1.5L and 1.0L bottles. It was used in rotation with the process of packing these bottles into bundles wrapped in heat-shrink film and has very few operating hours. With a flexible capacity of up to 20 cartons per minute, the machine is ideally suitable for end-of-line packaging operations at medium capacity. ATLANTA Giotto case packer, premium second-hand Manufacturer: ATLANTA Model: Giotto Year: 2015 Capacity: > 20 cartons per minute Features: - single-lane carton packing machine - for 80 x H262 cartons for 1.5 L PET bottles - and for 87.5 x H322 cartons for 1.0 L PET bottles Detailed technical specifications: on request Equipment layout plan: on request Packaging: - cartons of 4 x 3 bottles for the 1.5 L PET format - or ...

This PET bottle packaging machine was used in a bottling line for mineral water in PET bottles and packaged bundles of small 0.50-litre and 0.25-litre bottles onto a tray the width and length of a pallet, which then passed through the palletiser. Thanks to this machine – particularly for small-format bottles – the pallets of finished product are perfectly conditioned on each layer and also on all four sides of the pallet. See the diagram in the advert and the photos. With its flexible capacity, the machine is ideally suited to end-of-line packaging operations for bundles of small bottles at an average capacity of 12,000 to 18,000 bph. ATLANTA Rafaello tray barquette packer, premium second-hand Manufacturer: ATLANTA Type: Rafaello Year: 2015 Capacity: 12,000 to 18,000 bph Specifications: - tray barquette packer with single-lane feeding of bottle bundles New original ...

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Manufacturer: Siemens Year of manufacture: June 17, 2024 Machine type: Laboratory analyzer Model: Atellica CI1900 with Rack handler Maintenance history: Currently up and running and under a Performance Standard (former TOP) service contract with Siemens Find more here - .ucymachines/ Contact us at - sales@ucymachines

Overview This high-pressure air compressor was manufactured in 2003 by the Belgian company Ateliers François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and electrically connected in Germany and is available immediately. Technical data Free air delivery: 2,100 m³/h (35 m³/min) Operating pressure: 40 bar Design pressure (PS): 42 bar Speed: 480 rpm Shaft absorbed power: 355 kW Voltage: 400 V Year of manufacture: 2003 Application: PET bottle blowing Scope of delivery 1 × High-pressure compressor 40 bar CE68 ASG 1 × Refrigeration dryer 1 × Electrical control cabinet Condition Still installed and electrically connected Available for inspection on site Availability Immediately available.

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Right-hand version Workpiece dimensions: max. length 3000 mm, min. 250 mm, max. thickness 100 mm, min. 30 mm, width 200 mm Overhead cutting saw, 3 kW, 3000 rpm, manual horizontal movement over 120 mm, 400 mm blade, cutting height 100 mm 1 vertical shaft, 340 mm long, 40 mm diameter, 7.5 kW, 3100 rpm, suction port with 150 mm diameter (x2), max. tool diameter: 320 mm Carriage with pneumatic clamping 1100 x 500 mm table Stop, positioning from -45? to 45? Motorized carriage with electronic control 2-32 m/min

Atlas Copco ZT55VSD oil-free screw compressor Inverter integrated 55 kW 8.6 bar 8.55 m³/min Year of Make: 2016 Operating hours: 22,314 h

Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. - Back gauge 10 - 750 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space required including back gauge, without front support arms - approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - with: - E. - Foot - Switch - Cut line illumination

Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. Back gauge 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - with: - E. foot switch - Cut line illumination

Atlas CW650APS Film Slitting Rewinding Machine Atlas CW650APS Slitting and Rewinding Machine • Model: CW650APS • Year of Manufacture: 2012 • Condition: Maintained in excellent condition • Designed for: BOPP and other flexible films (12–50 µm) • Rewind Stations: 30 • Core Sizes: Automatic core loading Technical Specifications • Unwind System: Shaftless, web width 3600 mm • Maximum Mechanical Speed: 800 m/min • Slitting Width: 110–400 mm • Maximum Rewind Diameter: 500 mm Features • Fully automatic unloading system, including robot for placing reels on pallets • Razor slitting and two trim rewind stations • Automatic positioning of rewind arms and blade holders • Precise web guiding for continuous high-speed operation • Optimized for efficient and safe production We have a few Atlas Film Slitting & Rewinding Machines availa ...

Atlas 1602 Spare Parts Carrier Manufacturer: Atlas Type: 1602 E 2 pieces in stock 1602 D and 1602 E Location: 30900 Wedemark Private sale as a spare parts carrier Price 2,900,-- euros Spoons and grippers at extra cost Incl. help with loading.

faceplate diameter:1600 mm power requirement:80 kW weight of the machine ca.:25 t dimensions of the machine ca.:4,4 x 4,62 m max. workpiece diameter:2000 mm max. diameter of face turning:1800 mm tool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis

We have original spare parts (OEM) for FLSmidth/FULLER vertical roller mills: Spare parts for Fuller ATOX 25 mills, ATOX coal mill spare parts, spare parts for Fuller OK 39-4 cement mills PFISTER DRW rotor dispensers, rotary furnace burner, spare parts for vertical mills (VRM), grinding rollers, grinding tables, segments, separator parts, hydraulic cylinders, gearboxes for vertical mills, nozzle rings, consumable parts for cement mills, roller conveyors, motors, ABB inverters; about 2000 tons of parts available. Quoted price per ton of parts.

In case you request pickup by courier additional cost will be added for packaging. please contact the seller for transport and packaging costs . All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Brand AtlasCopco Type TEX 05P Construction date 2014 Auction-ID: A7-49077-85

Manufacturer: PROMECH Model: FW80 Device Type: Fifth Wheel Wrecker Attachment Professional towing and recovery attachment for tractor units Year of construction according to nameplate: 04/2026 Serial number: XKCTC260476 Maximum lifting capacity: 70 kN Stroke Distance: 37 inches Battery: 12V/80Ah Trailer Tow Pin: 2 inches (50mm) Towbar: 2-5/16 inches Towing capacity hitch: 12,000 lb Four bullhorn hooks Lighting system with 10 lights CE marked Sturdy steel construction Industrial design Color: Gray Electric lighting included Hydraulic lifting mechanism Suitable for towing and recovery operations Designed for commercial vehicles and tractor units Visually as good as new condition Little or no visible signs of wear Sold in existing condition Nameplate available and easy to read Ideal for towing companies, recovery services, commercial vehicle ...

Manufacturer: PROMECH Model: FW80 Device Type: Fifth Wheel Wrecker Attachment Professional towing and recovery attachment for tractor units Year of construction according to nameplate: 04/2026 Serial number: XKCTC260476 Maximum lifting capacity: 70 kN Stroke Distance: 37 inches Battery: 12V/80Ah Trailer Tow Pin: 2 inches (50mm) Towbar: 2-5/16 inches Towing capacity hitch: 12,000 lb Four bullhorn hooks Lighting system with 10 lights CE marked Sturdy steel construction Industrial design Color: Gray Electric lighting included Hydraulic lifting mechanism Suitable for towing and recovery operations Designed for commercial vehicles and tractor units Visually as good as new condition Little or no visible signs of wear Sold in existing condition Nameplate available and easy to read Ideal for towing companies, recovery services, commercial vehicle ...

Pressureless dust filters for mounting on silos, material bunkers, etc. in standard steel version. Equipped with 20 pcs. fabric filter hoses (200 mm x 2,000 mm long each), incl. electric vibro cleaning. Filter area: Approx. 25 m2. In very good condition, several filters available (same construction).

Consecutive wrongly ordered / project change! 2 piece Complete agitator with lantern, 2-piece agitator shaft, mechanical seal, gear motor, 2 stirring organs, quench entry, quench outlet, but without Thermosiphon. Installation and operating instructions. Price/piece

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

- Air cleaner fastening MWM 12300402 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new tech ...

Replacement fiber laser module IPG 30 Watt for FOBA labeler DP30F Model: YLP-V2-1-100-30-30 also available in 10 and 20 watts Fiber length 3 m, interface E Adapter for interface B1 in stock MA-107437 o. Target Laser Delivery: EXW, collection possible VAT will be shown

Bar attachment 60 Used - ready for immediate use! Galvanized beam clamps for support in beams and edge and ceiling formwork Length: 60 cm 4.4 kg Price: € 16,00 301 pieces in stock

Attachment adapter for castor mounting, series 5230, D150mm, A202008199/02, Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Attachment adapter for roll holder, Series 5230, D150mm x 330mm, Spanntec, - Attachment adapter for winding spigot D75, Series 3233, - Easy to place and fix on the carrier head - Mechanical actuation when carrier head is activated Attention: We have the complete winding drive, rewind drive D75mm and D150mm with servo motor, hypoid gear, additional flange, winding spigot and attachment adapte ...

Ref. -No.: 10258 Manufacturer: SCHAERER Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Lining: Forkardt F315 Brand Machine length: 3.800 mm Machine width: 1.300 mm Machine Height: 1.500 mm Weight Of The Machine Ca.: 4 t Tool holder type: Multifix Typ C Turning Length: 1.800 mm Turning Diameter Over Bed: 520 mm Turning Diameter Over Slide Rest: 320 mm Spindle Bore: 62 mm Bezel diameter (inside): 270 mm Hole in the jaw chuck: 84 x 120 mm

Auto. Attack Roller conveyor 4000 mm, right

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

- Atmospheric pressure - Tanks for the fermentation and storage of wine or beer - Dome 400 mm stainless steel AISI 304 - Nitrogen connection with stainless steel ball valve 3/8" - Cleaning pipe with DIN 32 connection - Cleaning ball Ø 65 mm AISI 316 stainless steel - Level indicator with return flow into the tank - Taster - Bottom conical 30° - Residual drain butterfly valve DIN 25 - Clear drain butterfly valve DIN 25 - Bimetal thermometer in stainless steel -20 °C/+80 °C with 200 mm long shaft - 3 adjustable stainless steel feet - Dimensions: Ø 800 x 1950 mm (h) - Mirror polished inside, marbled outside

84 sets, pallet attachment type 65, Cordes, ideal for stacking goods on Euro pallets – used- : Price for complete acceptance ex site: now only 4.950.-€ instead of 6.950.-€ (net)! Only 59.-€ (net) / piece! Manufacturer: Cordes Type: Pallet attachment type 65 Year of manufacture: unknown With hook connection for pallet dimensions 1200 x 800mm Effective depth; 800mm 800mm high 800mm wide Payload: 1,500kg Own weight per set approx. 22kg 4 stacking plates for safe stacking folding Original price: approx. 150.-€ Condition: very good Available: immediately Location: 74080 Heilbronn

Mitteltrennschnitteinrichtung - 4th and 5th knife attachment for Trimmer Müller Martini 4th-5th knife Year 1999 - Serial-No. DSS 2609 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Contactor, semiconductor contactor, contactor, power contactor, illuminated button, indicator light approach -Square D: indicator light attachment D1V1Y -Diameter: 22 mm -Price: per piece -Quantity: 40 pieces -Minimum order quantity: 5 pcs -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece

Contactor, semiconductor contactor, contactor, power contactor, illuminated push button, indicator light system -Square D: indicator light attachment D1V1W -Diameter: 22 -Price: per piece -Quantity: 90 pieces -Minimum order quantity: 5 pieces -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece