at used for sale

Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: MK3 -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Number: 12x recordings available -Price: per piece -Dimensions: 235/95/H95 mm -Weight: 3.0 kg/piece

Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø with groove -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Number: 28x recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece

Filler and screw capper for liquid and viscous products. Capacity approx. 900 bph. New machine

Hop-Injector - Dry Hopping New system in different sizes.

Electric screwdriver, servo screwdriver, with torque adjustment ATLAS COPCO QMR42-25-RT Tool holder: 3/8 R SERVO MOTOR: BSM 2260C-R4.3 4230 1704 81 speed: max. 7000 rpm voltage: 22 V at 1000 rpm QRT38050 4230161380 New ! Dimensions: 590 x 120 x 45 mm

Servocontroler ATLAS COPCO QCS 340 15 ( QCS34015 ) 4240 0329 81 regenerated ! Dimensions: 230 x 240 x 45 mm

Servocontroler ATLAS COPCO QCS 340 15 ( QCS34015 ) 4240 0329 80 Dimensions: 310 x 240 x 45 mm

Water separator ATLAS COPCO WSD 750 1613-6728-00 PB 20 TB 70 Volume: 8.6 l used, tested ! Dimensions 600 x 210 x 200 mm

Air branch block, porting block kit, 2 pieces ATLAS COPCO MIDI OPTIMIZER 9093 0022 03 operating pressure: 0 - 16 bar connections: 1/2 new ! Dimensions ( single air branch block ): 63 x 63 x 68 mm Dimensions ( packaging ): 160 x 140 x 70 mm

power capacity: 5,5 kW volt: 380 V ampere: 11,6 A weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,6x0,3x0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radiator, heat exchanger ATLAS COPCO 1617-0004-00 0653.725.0000 0653.731.2100 pmax.: 10.57 bar Connections: Ø 20 / 80 mm Flanges: Ø 200 mm, 100 x 100 mm Fittings: Ø 32 mm Radiator made of aluminum used, tested ! Dimensions: 1050 x 500 x 1030 mm

Screw compressor Manafacture: Atlas Copco Type: GA15 VSD FF Year of construction: 2022 Operating hours: approx. 4,400 Weight: 280 kg Pressure vessels on request

year: 2015 max. working pressure: 42 bar rated power: 37 kW rotational shaft speed: 401 r/min. Keeping your production up and running 24/24 Designed for industrial service 24/24, Atlas Copco DX/DN compressors work reliably at all times without the need for constant supervision. Their sturdy design leads to extremely low vibration levels. Proof of their reliability can be found in the thousands of machines installed in the field, where they provide a smooth and reliable supply of air or nitrogen. Protecting your process with oil-free technology Oil-free compression safeguards the quality of the compressed air and nitrogen. In most applications, even the slightest pollution is unacceptable and could lead to high risks for your production. Atlas Copco supplies the highest quality of air and nitrogen with boosters certified to Class 0 according to ISO 8573-1.

Lock case milling unit 2 outputs Recording HSK F63 for WEEKE Max. drive speed 10,000 rpm Gear ratio 1:1.48 Max. output speed 15,000 rpm Lock case cutter holder for collet ER 32 Faceplate cutter holder for collet ER 16

Compressive force: 135 t Working width: 4100 mm Clear stand width: 3150 mm Stand projection: 250 mm max. installation height: 310 mm Working speed: 7 mm/sec Return stroke speed: 50 mm/sec electr. Connection: 400 V, 11 kW Bcyhrjh9qri Weight: 10.8 t Space requirements: 4250 x 1800 x 2400 mm

oil-free compressor PROD. ATLASCOPCO TYPE ZT55VSD S/N API786865 YEAR 2011 POWER (kW) 55 PUMP (m3/min) 8.55 CIS (bar) 8.6 HRS (DOC/GENERAL) 45620/45924 WAVES yes BUILT. DRYER no EXCHANGER no COOLED (POW/WATER) air ON TANK no DOCUMENTATION no CONNECTION 2 1/2 NEW/USED USED

pressure: 200 t chamfer lenght: 3660 mm distance between columns: mm Control: total power requirement: kW weight of the machine ca.: 13,50 t dimensions of the machine ca.: m • 2 stop fingers, can be moved laterally • Block die with: V75, V50, V40, V25, V20, V10 (V50 and V25 defective at approx. 10cm in the middle) • Straight punch, height 200mm, length 3000mm, segmented • ATL 500 control for immersion depth (Y) and back gauge (X) • Centrally adjustable crowning • 2 support arms • Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PROD. ATLASCOPCO TYP GA11VSDFF PLUS S/N API271305 YEAR 2020 POWER (kW) 11 EFFICIENCY. (m3/min) 1,9 PRESSURE (bar) 12.75 INVENTER YES DRYER YES

PROD. ATLASCOPCO TYP GA11VSDFF PLUS S/N API269757 YEAR 2019 POWER kW) 11 EFFICIENCY. (m3/min) 1,9 PRESSURE (bar) 12.75 HOURS(DOC/OGÓL) 18665 INVERTER YES DRYER YES

Manufacturer: Bauknecht ATB, Type: 0V16/220, Model: 904431, Serial number: 738256, mH/Hz: 100 Hz, Output DC Volt: 3 x 220 V, Imax= Ampere: 16 A,

Manufacturer: Atlas Copco, Type: GA 45, Year: 1991, Volume flow m³/min: 5,94, Drive power kW: 45, Drying unit: yes, Compressed air min/max bar: 10, Year :1991

Manufacturer: Atlas Copco, Type: GA 55, Year: 1991, Control: Atlas Copco, Schraubenkompressor: yes, Running idle houres: 69200, Volume flow m³/min: 7,5, Verdichtungsenddruck bar 1: 12, Hauptläuferdrehzahl U/min 1: 2850, Antriebsleistung kW 1: 55, Year :1991

Atis Tool Monitoring Operator Monitor KLCD + MTC

Year of construction 2014, 30 kvA, nominal voltage: 400 V, nominal current: 43.3 A, on a single axle chassis with articulated drawbar and overrun brake, 1100 kg dead weight

PROD. ATLASCOPCO TYPE GA30 S/N API324380 YEAR 2013 POWER (kW) 30 PUMP (m3/min) 5.18 CIS (bar) 8.5

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 16 A -Input: 220 V -Output: 3x 0-220 V -Output frequency: 0-100 Hz -Number: 1x converter available -Price: per piece -Dimensions: 300/230/H110 mm -Weight: 3.6 kg

Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Power: 16 A -Input: 220V -Output: 3x 0-220 V -Output frequency: 0-100Hz -Quantity: 1 piece available -Dimensions: 300/270/H110 mm -Weight: 4.2kg

Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg

Backhoe bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Admission intermediate dimension: 255/200 mm -Bore: Ø 45/50 mm -Ripper teeth -The mounting on the spoon can be changed by us at an additional cost -Own weight: 160 kg

Backhoe bucket, excavator bucket, demolition bucket -Execution: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Admission intermediate dimension: 160 mm -Bore distance: 220 mm -Bore: Ø 45 mm -extended cutting edge -The mounting on the spoon can be changed by us at an additional cost -Own weight: 130 kg

Side dump bucket, wheel loader bucket -Wheel loader shovel -Shovel inside: 1850 x 670 x 800 mm -Own weight: 480 kg -Execution: stable -Admission inside: 860 mm -suitable for: Atlas

Screw compressor, air compressor, compressed air unit, stationary air compressor -Manufacturer: Atlas Copco, screw compressor type GA 45 -Delivery quantity: 5.9 m³/min -Motor power: 45 kW -Delivery rate: 99 l/s -Max. Pressure: 10 bars -Dimensions: 900/2150/H1625 mm -Net weight: 1150 kg

Screw Compressor, Air Compressor, Air Compressor, Trailer Compressor -Manufacturer: Atlas Copco, mobile compressor type XAS 55 -Volume flow: max. 3.1m³/min -Pressure: 7 bars -Engine: Deutz F3L 1011 F 30 kW -Drawbar: adjustable in height -Dimensions: 1330/2230/H1800 mm (drawbar folded up) -Weight: 814 kg

Electric motor, three-phase motor -Manufacturer: ATB, electric motor 80S 3327277-056 -Type: 80S TAF 0.55/4-7 -Power: 0.185KW -Speed: 1400 rpm -Shaft: Ø 20 x 60 mm -Type: B5 -Protection class: IP44 -Dimensions: 230/148/148mm -Weight: 8.1 kg

Electric motor, three-phase motor -Manufacturer: ATB Loher, electric motor from Speck pump CY-4091.01 / GBZ -Type: AF 90S / 2A-12 -Power: 1.5 KW -Speed: 2830 rpm -Shaft: Ø 18 x 65 mm -Construction: B3 / B14 -Dimensions: 315/177 / H230 mm -Weight: 15 kg

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Manufacturer gearbox: Atlanta, type 58 44 215 i 14.5 -Power: 2.45 kW / n1 1500 rpm -Manufacturer motor: Siemens, type 1 FT5072-OAFO1-2 / brake 1 FU1050-6GF -Motor: 150 V / 10.0 Nm // 3000 rpm -Hollow shaft: Ø 38 x 125 mm -Shaft: Ø 16 x 40 mm -Dimensions: 540/275 / H230 mm -Weight: 29 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 200 mm -Piston rod: Ø 40 mm -Total dimensions: 330/280/H510 mm -Weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Electric motor, three-phase motor -Manufacturer: ATB, electric motor 132 M type ERY 7.5/4-75 S -Power: 6.8 kW -Speed: 1455 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Protection class: IP54 -Dimensions: 480/320/H265 mm -Weight: 72 kg

Balancers, machine balancers, spring balancer, cable pulley, counterbalance weight balancers -Manufacturer: Atlas Copco, type RIL 10C -Load capacity: 2.0 - 5.0 kg -Dimensions: 200/250/70 mm -Own weight: 2.6 kg

Measuring transducers, power measuring transducers, active power measuring transducers, analogue converters, frequency/analogue converters, frequency dividers -Manufacturer: ATR industrial electronics, frequency divider -Type: DM1 B -Dimensions: 75/23/H110 mm -Weight: 0.1 kg

Measuring transducers, power measuring transducers, real power measuring transducers, analogue converters, frequency/analogue converters -Manufacturer: ATR, f/U converter -Type: WM275S -Price: per piece -Number: 3 piece -Dimensions: 75/23/H110 mm -Weight: 0.1 kg/piece

Tool holder, milling holder, milling tool, cutter head -Take: SK40 3 pieces -Sizes: see pictures -Price: complete -Dimension box: 320/110/H150 mm -Weight: 3.5 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Spare part: hydraulic control block comes from an Atlantic press brake type: HPT 13536 -Manufacturer: Rexroth -Valve type: S-4WE 10 F32 CG24/9Z4 C -Manufacturer: Sauer Sundstrand -Valve type: D24 SWH-G02-B2- -20 -Voltage: V -Pressure max: bar -Price: for all 5 pieces of valves -Dimensions: 600/700/H600 mm -Weight: 67 kg

Hydraulic pump, oil pump, gear pump, press brake, folding bench, folding machine, hydraulic punch, hydraulic punch -Spare part: Hydraulic pump from Atlantic press brake type: HPT 13536 -Manufacturer: Eckerle -Pump type: 1PF2GH3-12/013RE07MU2 -Drive: Loher type 132M-4 -Power: 7.5 kW 1440 rpm -Dimensions: 800/370/H300 mm -Weight 98 kg

Electric motor, three-phase motor -Power: 3.0 kW -Voltage: 690 V -Speed: 955 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP55 -Dimensions: 590/302/H295 mm -Weight: 67 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 100/65/H65 mm -Weight: 0.75 kg/piece

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 690 rpm -Shaft: 2 x Ø 19/40 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 4 pieces -Dimensions: 314/213/H162 mm -Weight: 9.1 kg