aster 180 used for sale

Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible.

working width: 1800 mm weight: 410 kg dimensions: 1800 x 1500 x 750 mm Bucket width approx. 1800 mm Bucket depth approx. 1500 mm Bucket height approx. 750 mm Entry pockets 70 mm x 180 mm Weight approx. 410 kg Capacity approx. 1300 liters Made in Germany, powder-coated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Single Temperiertechnik GmbH Model No.: Advanced Oil D2-180-18-0 Year of Make: 2016 Heating capacity: 18 kW Specific heating capacity: 23.2 kVA Rated current: 32 A Supply Voltage: 3×400V/N/PE Frequency: 50 Hz Max. temperature: 180 °C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: Heat transfer oil External capacity max.: 22 litres Net weight: 169 kg Device dimensions: Standard design (according to device type) Application: Temperature control for industrial processes, tools, plant modules Location: Schierling

A barely used surface grinding machine Optimum is available. Grinding width: 220mm, grinding length: 470mm, grinding height: 350mm, table dimensions X/Y: 210mm/450mm, max. table spindle center distance: 450mm, grinding wheel dimensions X/Y/Z: 200mm/13mm/31.75mm. Machine dimensions X/Y/Z: approx. 1200mm/1450mm/2000mm, weight: approx. 800kg. Dokumentation vorhanden. An on-site inspection is possible.

Number of sanding units: 6 St. sanding width: 180 mm Sanding height max.: 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----------------------------------------- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2070x800x2500 mm Weight: 450 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 2550 mm throat: 310 mm stroke: 200 mm ajustment speed: 80.0 mm/sec working feed: 10.0 mm/sec return speed: 58.0 mm/sec dayligth: 385 mm table width: 240 mm work height max.: 885 / 1050 mm oil volume: 180 ltr. total power requirement: 15.0 kW weight of the machine ca.: 9850 kg. range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display ...

A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible.

Used Höcker Dreisack 180 Socks with Feet Without blower

Dough mixer Manufacturer: Diosna With paddle Stainless steel bowl Volume: 180 liters Dimensions: 90x95x135cm Electric power: 3.5kW Voltage: 380V 50Hz

Type: MIX-180V Serial number: 2440 Year of construction: 2023 Mixer: 180 litres, double paddle Mixing speed: 6 - 60 RPM, frequency controlled Vacuum pump: Busch 21m³/h Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 3kW Dimensions: 1750 x 850 x 1450 mm Weight: 388 kg Machine in new condition, only 8 working hours!

Features Volume 15180 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3750 mm Height 2250 mm Diameter width 2600 mm Weight 050 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded welding nozzle DN 40 with T-piece and airlock connection DN 50, Threads according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Underbody: Clapper bottom Remaining drain with forward-drawn outlet bead with flange and angled seat valve DN 50 with cap 4 calotte feet, height-adjustable, with w ...

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This IMA BIMA P480V 180/480 was manufactured in 2001. A CNC Wood Machining Centre ideal for diverse woodworking applications. Contact us for more information.

Key data: 180 mm, 400 mm

Control Siemens ... Sinumerik 840 D Turning diameter... 180mm Turning length... 400mm Inclined bed Spindle bore ... 63mm Turret head Tool turret ... 12 L x W x H ... 3875 x 2122 x 2345mm Machine weight ... 7000kg Spindle speed... 10-3500 rpm The machine is in good condition, possible to test under power at our warehouse in Brno.

Stainless Steel Mash Tun 1800L. Manufactured: 2015 Manufacturer: Brewing Vessels Ltd. Insulated with 80mm of insulation. Side entry manway. Sight level side window. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

CANALI log band saw system model BBS. V - PACIFIC - 1800 Type 555 Refurbished 2024 CANALI pneumatic clamping carriage with 4 clamping claws, speed 6-120 m/min., 100 kW 3 log turners, 4 ejectors, cutting thickness adjustment 150 mm/sec. Log feeding station with insert, hole pull with model cross conveyor complete sharpening room equipment Iseli stellitizing machine SAA, Iseli leveling machine EBW-E, rolling machine with straightening bench, Band saw sharpening machine and leveling machine Electrical cabinets and control panels, control cabs Refurbished 2024

This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information.

This 9-axis DOOSAN PUMA TT 1800 SY was manufactured in 2014, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT 1800 SY machine we have for sale. Contact us for more information.

Two Polymaster sample display machines for the film industry are available. Working width: 1900mm/2100mm, roll weight: 100kg, machine dimensions X/Y/Z: approx. 2550mm/1050mm/2000mm. Documentation available. An on site inspection is possible.

This Pinacho Smart Turn 180/42 1000 was manufactured in 2012. A robust horizontal turning machine featuring a turning length of 1000mm, spindle clearance of 42mm, and a turning diameter of 360mm. It includes an 8-fold tool changer and Fagor 8055tc control. Dimensions are 2.5 x 1.15 x 1.65 m, weighing approximately 1.2t. Consider the opportunity to buy this Pinacho Smart Turn 180/42 1000 horizontal turning machine. Contact us for more information.

This 3-axis Takamaz X-180 horizontal turning machine was manufactured in 2008. It features a maximum turning diameter of Ø 210 mm, a turning length up to 230 mm, and a bar diameter capacity of Ø 51 mm. The spindle supports speeds up to 3,500 RPM, enhancing productivity. Ideal for precision machining, it includes a 12-station revolver turret and rapid traverse speeds of 24 m/min on both X and Z axes. Contact us for more information about this machine.

cutting width: 3.400 mm Motor output: 2 x 1,1 kw kW weight of the machine ca.: ca. 400 kg saw blade diameter: 330 mm swivellable: -45, 90, +45 ° : 45, 90 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This plastic 3D printer was manufactured in 2018. The MASSIVIT 1800 PRO features a print volume of 145 x 111 x 180 cm and supports materials like Dimengel 90 and 100. It includes an automatic cleaning mechanism, advanced monitoring with an integrated camera, and remote control capabilities. If you are looking to get high-quality 3D printing capabilities, consider the MASSIVIT 1800 PRO machine we have for sale. Contact us for more information about this machine.

x-travel: 1.800 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 25 / 35 kW max. Torque: 130 / 87 Nm tool taper: HSK A63 DIN 69893 swivellable: B: +/- 100 ° work table:: table surface area: 2.100 x 700 mm max. table load: 1.500 kg number of T-slots: 7 NC-Rotary table:: table diameter: 750 mm max. table load: 500 kg number of T-slots: 7 rotatable: C: 360 ° tool magazin:: number of toolpositions: 30 pos. tool taper: HSK A63 DIN 69893 max. tool weight: 6,0 kg max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm change-time chip to chip: 7,6 sec feeds:: rapid traverse ( X / Y / Z ): 40 m/min Accelaration: 4 m/s² feed speeds: max. 40.000 mm/min Feed force ( X / Y / Z ): 8 kN total power requirement: 70 kVA weight of the machine ca. ...

This OiMA SACMI 3300-180 was manufactured in 2009. It features a robust electric-hydraulic hybrid drive and an integrated cooling system. The machine is equipped with a GDNet communication interface for real-time monitoring and diagnostics, ideal for producing medium-to-large plastic components. Consider the opportunity to buy this OiMA SACMI 3300-180 hydraulic injection moulding machine. Contact us for more information.

Pressure 10 bar, Pump capacity 200 m3/h Liquidity 250 CST el.mootor 132 kw , 1315 rpm , 232 A 5 pcs.

This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.

Ungerer 1800 x 5 mm Max sheetwide: 1800 mm Max sheetthickness: 0,7 > 5 mm Max speed: 16 m/min Number of flattingcoils: 9+8 rolls (dia 55 mm) Power : 28 HP Weight: 9,7 ton

Inv. Num. : 8932 Type: AUTOCLAVE 1800x3500 Producer: MAGNABOSCO Created: 2011 Parameters: Volume: 11000 l Maximum temperature: 180 C Max. pressure: 6-12.5 MPa Diameter: 1800 mm Length: 3500 mm Machine weight: 4000 kg

Leit & Tension Spindle Lathe WEILER COMMODOR 180 GSD / New -Unused -Exhibition machine / zero operating hours -CE marking -3 - Axis Digital Display -Tip width 1000mm -Tip height 180mm -Spindle passage 56mm -Circumferential diameter over bed 380mm -Circumferential diameter via face slide 215mm -Speed range / gearbox 25-2000 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric/Diametrical -Tailstock / quill cone MK 4 -Quill stroke 150mm -Coolant device -Multifix with insert -Three-jaw chuck 200mm -Work light -Swarf back wall -Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000Kg

Inv. Num. : 8936 Type: KM 65-180 CX Producer: Krauss Maffei Created: 2006 Parameters: Clamping force: 65 t Screw diameter: 28 mm Injection capacity: 74 cm³ Distance between stands: 420 x 420 mm Ejector stroke length: 150 mm Injection weight: 3700 kg

General SKUR1168 MakeDeDietrich & Cie (FR) LocationBarneveld Type1800 Ltr. Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume1800 Ltr. Pressure3.2 Bar Specified Features - Pressure vessel MaterialGlass - Enamel (3008) Capacity1800 Ltr (nett. 1600 Ltr) Vessel sizesdia.1000mm x1800mm Dished topcheck Dished bottomcheck With covercheck Top connections2x DN200, 2x DN100, 3x DN80 OutletDN80 Max. temperature100 degr.C. With jacket(150 Ltr) With paddle stirrercheck Motor1,1 KW, 380 Volt (EX) Speed mixing shaft571 rpm Information No.19865 Year of construction1986 Floorspace1,4x1,4 M Total height3,9 M Weight1500 Kg ATEX compatiblecheckPressure vesselsDe DietrichTanks > Pressure vesselsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

Inv. Num. : 8937 Type: KM 65-180 CX Producer: Krauss Maffei Created: 2008 Parameters: Control System: MC5 2.0 Clamping force: 65 t Screw diameter: 25 mm Injection capacity: 74 cm³ Distance between stands: 420 x 420 mm Ejector stroke length: 150 mm Injection weight: 3700 kg

General SKU314N467 Makeunknown, manucfactering tag is missing Mounted on legscheck Main Features MaterialStainless steel Volume18000 Ltr. Motor3 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vesselcheck Capacity+/- 18000 Ltr Vessel sizesdia.2800mm x3200mm With covercheck Outletdia.80mm With paddle stirrercheck Motor3,0 KW, 220/380 Volt Information LocationBarneveld Floorspace3,3x3,3 M Total height5,2 M Weight2000 KGStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 4-axis Hyundai WIA LM 1800 TTSY was manufactured in 2025, featuring a maximum turning diameter of Ø230 mm and length of 673 mm. It boasts a spindle speed of up to 5,000 rpm and a bar capacity of Ø65 mm. The machine includes a built-in motor spindle, dual 12-tool turrets, and rapid traverse rates ensuring efficient operations. Ideal for complex turning tasks. Contact us for more information about this machine.

Key data: 800 kN

Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of Make: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Spray pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touch Screen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Sprue Picker Sepro Industrial Robot 55 Year of manufacture: 2018 It is possible to buy a Moretto raw material feeding system at an additional cost The set includes: - Screw dosing device, volumetric with container - Conveyor with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heatin ...

This Engel victory 1800/300 was manufactured in 2016. A hydraulic injection moulding machine with a 300-ton machine power, it features a screw diameter of 60 mm and supports up to 16 hot runners. Equipped with four hydraulic core pullers and a Viper 12 robot, it offers enhanced automation capabilities. Contact us for more information about this machine.

Key data: 1800 kN

Engel e-max 440/180 / Electric machine Year of Make: 2009 Injection unit: Screw diameter: 40 mm Injection weight: approx. 199 g Spray pressure: 1950 bar Dosing volume: 220 ccm Clamping unit: Clamping force: 180 t Tiebar spacing: 520x520 mm Size of the clamping plates: 760x775 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touch screen Additional equipment: Machine in very good technical condition, worked in clean production Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hardened injection unit - Bimetal Parallel movements Central lubrication Automatic tool height adjustment Kistler Sensor - Tool Pressure Control Original Tool Crane Dimensions: Weight: 7200 kg Length/Width/Height: 5.87x1.42x2.00 m All offered machines are started by our service technicians before they are sold ...

This Engel VICTORY 750/180 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 1,800 kN and a screw diameter of 50 mm, it supports a maximum injection volume of 393 cm³. Currently in production and in excellent condition, this machine also includes a robot interface EUROMAP 67. Contact us for more information about this machine.

General SKU290N374 MakeKoruma Maschinenbau Hauser kg LocationBarneveld TypeDH VI/180 EX Motor Motor power28 kiloWatt Main Features MaterialStainless steel Motor28 KW Inlet diameter90 mm Specified Features - Colloid mill Colloid mill in linecheck Rotor sizesø 180 mm Without hoppercheck Inletø 90mm Outletø 100mm Motor28 kW, 400 V (Ex), 2940 rpm Speed2490 rpm MaterialStainless steel Information No.3383 Year of construction1984 Mounted on framecheck Floorspace1,8 x 0,7 m Total height0,6 m Weight540 kg ATEX compatiblecheckColloid millsFryma KorumaMills > Colloid millsBrand > Fryma Koruma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machine ...

This 6-axis PANASONIC TA-1800WG Welding Robot was manufactured in 2008. It includes a 350A welding source, a VWP 316/351/95-3 welding gun, a BRG 2000 mechanical cleaner, an 800mm plinth, and a 750 H-manipulator. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800WG machine we have for sale. Contact us for more information.

Key data: 1800 kN

Engel Victory 200H/60W/180 combi / Production line with the Engel Viper 20 robot Year of Make: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Spar spacing: 0x0 mm Size of the clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced Injection Units - Bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter  ...

Shredder of the leading company LINDNER model: KOMET 1800 single shaft number of knives 50pcs. Ideal for SRF/RDF (paper, plastic, fabric, wood), accompanied by the electrical panel and the control panel. Drive motor: 200Kw ABB 400V/50Hz Hydraulic unit: Dorninger-Heavy Duty 1:65lt/min ,Drive Capacity:11Kw The machine is in excellent condition, being sold due to replacement with a new more advanced model.

Centrifugal pump, 11kw, inlet/outlet DN 80 to DN 100 PN16 (DIN2633)

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details.

Krones Spirit Filling Line Max Speed 18,000 BPH Suitable for 70cl, 75cl and 1 litre bottles Includes; Accummulator - Hartness Dynac - Dynac 6400 - 2004 Cap Feed Elevator - Gassner - Compact Feeder - 2005 Cap Feeder Elevator - Zalkin - Promach 400l - 2020 Cap Feed Elevator - Zalkin - FCT 1911 - 1998 Cartoner - Langenpac - HCC - 2004 Case Erector 1 - Krones - Variocart C-40 - 2004 Case Erector 2 - Krones - Variocart C-40 - 2004 Case Printer 1 - Marsh - Encore - 2007 Case Printer 2 - Marsh - Encore - 2007 Case Sealer - Krones - Variocol H-120 - 2004 Depallitiser - Krones - ABSCH.PRESS.URI1 - 2004 Deshrouder - MSK - MSK 800 - 2004 Divider - SFT Syncro Laner - VWS - 2004 Fill level inspection - Mapex - FLO - 2004 Capper 1 - Zalkin - T9/360 - 2004 Capper 2 - Zalkin - T9/360 - 2004 Capper 3 - Zalkin - T9/360 - 2004 Filler Bloc ...

We are offering for sale a cable recycling plant .The plant is composed of the following elements: Main Granulator - Manufacturer: IRS SRL - Model: Easy - Type: 180 - Installed power: 8.8 kW - Year of manufacture: 2021 - CE certified Pre-Shredder - Manufacturer: ISVE - Model: MS 2260 Matching Conveyor Belts Find more here - / Contact us at -

: 0.4-5 mm Workingpiece thickness from to: 10-50 mm Total length: 2730 mm Feed speed: m/min. total power requirement: kw Weight: 720 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.