aster 180 used for sale

Oil seal, shaft seal, radial shaft seal, sealing ring -Manufacturer: Freudenberg, Simmerring Baum / DIN A unused original packaging -Type: BAU7X2 180x210x15 -Art.No.: 40412511 / 1045 3053 72NBR902 BAU7 -Quantity: 4x shaft seals included -Packaging dimensions: 300/300/H30 mm -Weight: 0.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder double-acting stroke 180 mm -Piston rod: Ø 36 mm / M28 -Mounting: bolt circle Ø 118 x 8 mm -Dimensions: 380/140/H140 mm -Weight: 10.6 kg

Machine Type: MIG/MAG Inverter Welding Machine Make Merkle Type MobiMIG 180 K Serial No. 89.754 Connection voltage 1 x 230 Volt Adjustment range 25 – 180 amps Duty cycle 20% ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Wire Feeder 2-Roller Gearbox Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special Accessories ColdMIG Welding Process E-welding, MIG soldering, cored wire welding Weight 17 kg Age 12 years Condition workshop tested, very good incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece of welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick sp ...

Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Drive type: Chain overdrive Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 800 Nominal / outside width in ...

faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1500 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min power capacity - table: 100 kW Torque: 31784 Nm 0: 218 kw weight of the machine ca.: 55 t Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coola ...

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm -Weight: 13.3 kg

Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute Two similar machines available at the same place !

x-travel: 1600 mm y-travel: 920 mm z-travel: 900 mm table surface area: 1800x700 mm T-slot - distance: 120 mm Table load: 3000 kg spindle taper ISO: 50 power capacity: 22/30 kW spindle turning speed range: 60-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool slide: Support slide support carrier with turning tool holder -Clamping height: 40 mm -Dimensions: see photos -Dimensions: 370/180/H170 mm -Weight: 17.8 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1270 / 1120 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min cross rail - adjustment: 400 mm ram head - cross travel: (X) -2770 / +2275 mm ram head - vertical travel: (Z) 1250 mm c-axis: 360° (0,001°) deg milling drive: 37 kW turning speed range - milling: 10 - 3000 U/min power capacity - table: 100 kW Torque: 31784 Nm feed range: (X/Z) 0,1 - 15000 mm/min total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilli ...

Unused, stock item, model standard, IP 65, A4- A6, IP 65, max. load capacity 210 kg, weight 81 kg, warranty

Electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LG4186-4AA60-Z 180L -Power: 22 kW -Speed: 1465 rpm -Protection class: IP55 -Shaft: Ø 48 x 110 mm -Design: B3 -Dimensions: 670/340/H440 mm -Weight: 152 kg

Electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor explosion-proof -Type: 180L-4 -Power: 22 KW -Speed: 1465 rpm -Shaft: Ø 48 x 110 mm -Design: B5 -Protection class: IP54 -Dimensions: 700/475/H350 mm -Weight: 219 kg

Clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table -Measuring table: precision measuring table -Clamping surface: 215 x 180 mm -Measuring stand: height up to 220 mm -Dimensions: 260 x 260 x H320 mm -Weight: 13.2 kg

3 boxes x hotmelt HM-180 (5kg bag) remainder Art.Nr. 995.18.02 (L985) 75€ for 3 cartons

81 pallets with scrubbing disc List on request Total weight approx. 60 ton net Total quantity approx. 160,000 pieces VE date 2025/2026 Price on request

New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm

description: 180 ° curve conveyor suitable for different tray formats. Belt width 800 mm Radius 1800 mm New-quality motor can be offered with the desired requirements width: 4450 mm length: 2500 mm serial number: 642-92-900 S176 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK techni ...

Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)

Manufacturer: KUKA KR 180, Year: 2004, Max workpiece weights kg: 180, Year :2004

Clamping device, clamp bracket, clamp clamp, clamping bracket, pipe clamp bracket, pipe clamp, pipe clamping system, mounting device for pipes, pipe quick clamp, pipe quick clamp -Pipe clamp: pipe quick release -Clamping range: Ø 40 to 180 mm, see photos -Dimensions: 230/120/H310 mm -Weight: 3.5 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 doors, solid construction with 8 drawers -Width: 1800 mm -Depth: 710 mm -Height: 2060 mm -Drawers/shelves: See photos for layout/height -Weight: 565 kg

Manufacturer: Kuka KR 180-2 2000, Year: 2004, Max workpiece weights kg: 180, Year :2004

Manufacturer: Jsting , Type: PFS 1800, Year: 1964, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: ca.80, Cutting lenght mm: 1800, Schnittbreite min-max mm: 850, Working hight mm: ca.40, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Year :1964

Rotary actuator, pneumatic cylinder, rotary vane actuator, rotary module, pneumatic rotary actuator, rotary cylinder -Manufacturer: Festo, Rotary actuator type DRRD-16-180-FH-Y9A 1644389 -Rotation angle: 180° -Quantity: 1 available -Dimensions: 140/60/H30 mm -Weight: 0.6 kg

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 300 x 180 mm -Quantity: 1x angle stop available -Dimensions: 305/180/H20 mm -Weight: 0.6 kg

Indexer, indexing gear, cam indexer, rotary table indexer, rotary indexing drive -Manufacturer: Candex, cam indexer -Type: RU45DFS-02-180-2RX-CN -Shaft: Ø16 mm / 2x Ø14 mm -Translation: 1:2 -Dimensions: 160/150/H130 mm -Weight: 5.2 kg

Manufacturer: Koch Contuorfräsmaschine, Type: Sprint PTP 2 1800, Year: 2012, Control: Beckhoff, Program: Koch-Wop, Online connection: möglich, Machining stations: 2, 4 Achsensteuerung: yes, Work piece width min-max mm: 120-1360, Work piece length min-max mm: 120-1360, Work piece thickness min-max mm: 19-25, Number of milling spindles: 1, Milling spindles horizontal: 1, Tastend Aggregat: 1, Power kW 1: ca.0,75, RPM min-max 1: 18000, FREE TEXT: zusätzliche Festplatte/Windows XP, Year :2012

electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LG4186-4AA60-Z 180L -Power: 22 kW -Speed: 1455 rpm -Protection class: IP55 -Shaft: Ø 48 x 110 mm -Design: B5 -Dimensions: 720/350/H450 mm -Weight: 184 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt roller: Transport roller with bearing block and drive wheel -Roll: Ø 99 x 1800 mm rubberized -Shaft: Ø 35 x 200 mm -Dimensions: 2200/200/H150 mm -Weight: 31 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt roller: Transport roller -Roll: Ø 100 x 1800 mm -Shaft: Ø 23 x 200 mm -Quantity: 3x transport rollers available -Price: per piece -Dimensions: Ø 100 x 2200 mm -Weight: 13 kg/pc.

Transnorm belt curve conveyor right GKF 180°-1270-1100-IR1200 RA1946 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: good (used) Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Driven:  ...

max. wheel diameter: 180 mm table diameter: 145 mm max. module: 3-5 mm gear width: 250 mm table turning speeds: 800 U/min milling head vertical adjustable: 400 mm Milling axis swiveling range: + / - 45 ° max. milling cutter diameter: 90 mm hob turning speeds: 0 - 6000 U/min cutter length max.: 211 mm control: Siemens 840 D total power requirement: 23 kW weight of the machine ca.: ca. 10 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Machine in top condition, equipped with loading unit, many accessories. This machine is equipped with manual deburring function with a cutting wheel, no chamfering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG DMC70H year 2007 Hours in picture he 2007 Deckel Maho DMC 70 H is a horizontal machining center produced by DMG (Deckel Maho Gildemeister), a renowned German manufacturer known for high-quality CNC machining centers. Here are the key details about this model: Key Specifications: - Type: Horizontal Machining Center - Year: 2007 - Table Size: Usually features a pallet size of 630mm x 630mm, though this can vary based on the setup. - X-Axis Travel: Around 700 mm. - Y-Axis Travel: Around 800 mm. - Z-Axis Travel: Around 800 mm. - Spindle Speed: Can reach up to 18,000 rpm, depending on the specific configuration. - Spindle Motor: Offers robust power, typically around 35 kW (may vary based on options). - Automatic Pallet Changer: Often comes with an automatic pallet changer, improving productivity by minimizing downtime during setup. - High-Rigidity Design: Known for its rigid construct ...

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 100 kg

-Stainless steel work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 120 kg

Aluminum table, aluminum work table -Design: stable -Base floor: 1 -Plastic sheets -filing -Dimensions: 1800/700/H820 mm -Weight: 60 kg

Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: 1,5 kW Feed speed: 4,5 - 27 m/min. total power requirement: 15,5 kw Dimensions (L/W/H): 3.700 x 1.500 x 1.300 mm weight of the machine ca.: 1.600 kg turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 180 mm x-travel: 8000 mm y-travel: 4000 mm Control: Siemens type: Sinumerik System 3 ram: horizontal adjustment: 800 mm Spindle travel W-axis: 1400 mm ram: diameter: 220 mm engine output: 75 kW turning speeds: 900 U/min Plate area: 8000x6000 mm angular milling head: total power requirement: kW weight of the machine ca.: t Overhauled in 1983 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your  ...

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

DMG DMC 70 H year 2007 The 2009 Deckel Maho DMC 70 H is a horizontal machining center manufactured by DMG (Deckel Maho Gildemeister), which is a well-known German company that produces high-precision CNC (computer numerical control) machine tools. Hours in picture Find more here - / Contact us at -

pressure: 200 t table length: 2500 mm table width: 1800 mm table travel: 2700 mm dayligth: 2250 mm upper clamping surface:: 1800x2500 column base area: 1900 mm total power requirement: 22 KW weight of the machine ca.: 30 t dimensions of the machine ca.: . m Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for t ...

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Geared motor, electric motor, electric geared motor -Speed: 77 rpm -Power: 0.55 kW -Design: Angle gear -Brake -Shaft diameter: 19 mm -Protection class: IP 54 -Weight: 22 kg

Universal milling angle head, milling angle head -Receptacle: Collet -Recess inlet: Ø 160 mm -Bolt circle: 174 mm -Milling spindle: 45° -fully swiveling -Dimensions: 200/185/H320 mm -Weight: 20 kg

TO WHOM IT MAY CONCERN; WE VE 2 SETS NEW UNUSED SPIROFLEX EJN-180 COUPLINGS AT STOCK. ( EX STOCK ) ( LEFT AND RIGHT ) PLS FIND DETAILS ON BELOW TYPE EJN-180 MD 1272 TESTED & REPORTED. LR HAN 1673452 IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -Grinding discs: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Scissors: 180 x 4 mm -Dimensions: 800/400/H900 mm -Weight: 60 kg

Geared motor, electric motor, electric geared motor -Speed: 259 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 32 mm -Protection class: IP 55 -Weight: 30 kg