128,878 used machines on RESALE, but how to find them? Machine Search
Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm F ...
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1900-1800-550 RA1149 TYear of manufacture 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1800 mm conveying length: 1900mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 1900 Nominal / outside width in mm: 1800 Roll width in mm: 550 Driven: YES Conveyor speed m / s: 0,35 For individual, profess ...
; Gross weight [kg]: 1918; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 349
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1800-1220-550 RA1148 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1300 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 1800 Nominal / outside width in mm: 1220 Roll width in mm: 550 Driven: YES Conveyor speed m / s: 0,35 For individual, professional advice, simply cont ...
pressure: 180 t stroke: 400 mm column daylight: 1500 mm Frame Width: 550 mm distance spindle /table: max. 1000 mm total power requirement: 7,5 kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: 2300x1200x2850 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 8 mm, 1
Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...
We offer a paternoster LTG-TowerMax P 2.4-120-20-380-4780 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 4,780 mm Overall width 3,385 mm Overall depth 1,180 mm 20 carriers with a payload of 120 kg each in clear usable dimensions: H = 380 mm W = 2,950 mm T = 410 mm Chain jump 412 mm 20 galvanized intermediate floors for 55 kg payload each Total payload up to 2,380 kg Side table in 1000 mm above OKFF with wooden worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, supporting cases anthracite Motor power drive 1 x 1.8 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
new spiral mixer Masz SMR 180 extendable, year of construction 2023, 120 kg dough, 2 clocks, stainless steel spiral, with 1 stainless steel kettle, if necessary with 1 additional kettle for an additional 3,800€, Fabr.-No. 121323, boiler diameter 75 cm, 6.8 kW, 50 Hz, 400 V, external dimensions 149 x 87 x 128 cm, weight: 549 or 726 kg
Heidenhain RON 255 C-18000 ID.-No. 358 697-70 Incl. test report from Heidenhain Replacement part not required
DEHUMIDIFIER MUNTERS ML 180 Desiccant dehumidifier with air-cooled condenser. Designed to efficiently dehumidify unheated enclosed spaces, with operating hours counter. Stainless steel sheet exterior, one-piece, fully corrosion-resistant plastic, with interchangeable front and rear panels for easier installation. Built in 2009. FEATURES - operating temperature: +0 / +25 °C - dehumidifies up to -20 °C - dehumidifies up to low dew point - IEC Protective class (unit): IP33 - IEC Protective class (electrical panel): IP54 - Sound power level to room Lw(A) dB (all inlets and outlets ducted): 75 dB(A) - Filter class: G3 Process Air - Rated airflow: 180 m3/h - Available static pressure: 200 Pa Reactivation Air - Rated airflow: 67 m3/h Condenser - Sensible heat: 1.4 kW - Fan power: 0.3 kW - Rated airflow: 650 m3/h - Available static pressure: 200 Pa ...
We sell here a cooking system from the manufacturer ASCA Consulting in a very good used and functional condition. The system is built in 12/2014, electrically heated, 400 volts, 20 kW, chamber volume 1800 litres, Aditec MKA 110 control, workshop tested, ready for immediate use, dimensions W/D/H 170/140/255 cm, others on request.
WTT 180° degree roller cam 640-600 IR500 RA1803 Technical data: Framework width (NB): 640 mm Roll width (EL): 600 mm Roller pitch: 5:6 Rolls: 50mm, galvanized pitch (Tlg): 105 mm Conveying angle: 180° degrees Inner radius (IR): 500mm Overall height (BH): 80mm top edge of rollers Side guide outside: 185mm Drive: without Supports: without Construction: frame painted gray, rollers galvanized Optionally available: Supports: 70,00 Euro plus VAT / piece All prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Nominal / inner radius in mm: 500 Nominal / outside width in mm: 640 Roll width in mm: 600 (Nutzbreite) angle: 180° Driven: NO scope of delivery: without supports For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning ...
Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet ...
Pressure: 14 bar Motor: 1,51 kW Free air delivery: 18 m³/min Measurement (WxHxD): 700 x 1360 x 1150 Weight: 210 kg Compressed air connection: 2
Angle grinder, cutoff grinder -Grinding wheels: Ø 180 mm -Power: 2300 W -Speed: 8500 rpm -Dimensions: 525/180/H140 mm -Weight 6.5 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 26° -Drawing: in the photos -Dimension: 13 x 180 mm -Length: 45 mm -Weight: 0.7 kg
Lippert belt conveyor GF 18000-750-600 RA2246 Technical data: Conveyor length (NL): 18000 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 18000 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m ...
Used bread line GLIMEK -In good bakery condition- - Dough divider GLIEMEK SD-180 with XL funnel - Intermediate oven IPP840-008 - Long caster GLIMEK M0671 - Rounder - Capacity: approx. 1,500 pcs./h The plant has only been running for 10 years and only in the summer season. Out of service since 2017. Viewing and test run are possible by arrangement.
Clamping plate, measuring plate, measuring table, optical measuring device, altimeter, measuring table -Measuring table: with optical measuring device and altimeter -Width: 695 mm -Length: 1800 mm -Height: 1775 mm -Weight: 444 kg
SECOND-HAND FILTERING PLANT CM MOD. FST 180M - 180 bags mm 200x2500 - static filter - main motor 40 Kw - year 2008 - capacity 30.000 mc/h - CE rules
Brand: Direct Colour Solutions Model: DJ 1800S Printer, 6" IR2 INK Year of production: 2020 Equipment: Stock Base Dongle, ADA Module 1800S IR2 LCF, EZCyl, 1800S, IR2 Ink, 1800 Vac Table Kit, 13", 220V
Hacksaw, hacksaw machine -Hoop saw: electric, with coolant system -Type: unfortunately no type designation -Power: 0.55 / 0.75 kW -Max. cutting height: approx. 145 mm -Max. cutting width: approx. 180 mm -Saw blade: Length approx. 325 mm -Machine dimensions: 800/700/H1520 mm -Weight: 224 kg
Stick electrodes 3.2 x 450 -Type: KESTRA Fe Ti 180 -Price: per package -Number: 3 packages -Weight: 5.9 kg
Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 250/180 mm -Height: 30 mm -Number: 3x pillows available -Price: per piece -Weight: 2.2 kg/piece
BOEHRINGER NG 180-2 CNC turning center was built in 2006 in Germany. This reliable and efficient machine performs precision machining of workpieces with a maximum diameter of 290 mm using a high-speed spindle and high-quality cutting tools taken from a 12-position turret. The entire turning process is performed with excellent stability, thanks to a vibration- and oscillation-resistant design made of high-quality raw materials. The BOEHRINGER NG 180 CNC lathe is controlled by an intuitive SIEMENS CNC control, whose excellent optimisation allows to maximise production efficiency. The total weight of the machine is 10000 kg. Technical specifications of the BOEHRINGER NG 180-2 lathe - CNC control: SIEMENS SINUMERIK - turning diameter: 290 mm - turning length: 850 mm - 12-position turret head - maximum spindle rotational speed: 4000 rpm - minimum spindle rotational speed: 10 rpm - d ...
Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Shears: 200 mm -Dimensions: 350/100/H710 mm -Weight: 17.6 kg
Inv. Num. : 5839 Type: PUMA TT 1800 SY Producer: DOOSAN Created: 2013 Parameters: Control system: FANUC 31i-B Duty cycle: 8981 h Maximum turning length: 600 mm Maximum turning diameter over bed: 300 mm Maximum turning diameter over support: 230 mm Number of spindles: 2 pieces Maximum main spindle power: 22 kW Spindle clearance: 76 mm Maximum spindle speed: 5000 1/min Maximum workpiece weight: 120 kg Max. rod diameter: 65 mm Axis X1/X2: 165/190 mm Axle Z1/Z2: 700/720 mm Axis Y: 100 mm B-axis: 770 mm C1/C2 axis: 360 Weight: 7800 kg Equipment: Bar feeder SS 2500 Conveyor Feeder/Dispenser
The press is function with two adaptor Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18 Drive motor kW 30 Stroke rate (infinitely adjustable) min-1 6-24 Pre-suspension. Distance max. mm 62 (surcharge). Force max. kN 5.3 Total height mm 4700 Total width mm 2360 without electricity Total depth mm 2700 Hydraulic unit Total weight, net kg 17000
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: adjustable from 75 to 180 mm -Recording: MK2 -Dimensions: 275/240/H260 mm -Weight: 22.5 kg
Probst & Class/ K 180 EL GLEN-GK/ 2017/18 Colloidal mill 2 available, price per piece For vegetable for example carrots used, sold as it is, where it is, price ex location
table length: 2000 mm table width: 1800 mm table load: 12,5 t Travel: 1250 mm width of T-slots: 28 mm T - slots distance: 160 mm total power requirement: 6 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 3,7x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: FANUC Series 0i-TC Number of spindles: 1 Equipment: C-axle, gantry loader, tailstock, tool holder
Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1800 mm -Height: 45 mm -Groove width: 11 mm -Weight: 117 kg
Three-phase motor with 2 speeds, electric motor -Power: 5/18 kW -Speed: 725/1460 rpm -Shaft: Ø 48 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Dimensions: 710/350/H450 mm -Weight: 179 kg
Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock comes: from a lathe -Tip height: 180 mm -Recording: MK4 -Dimensions: 540/250/H310 mm -Weight: 65.5 kg
Inv. Num. : 7839 Type: SK 180MP/4 Produzent: AUTOMATICE Erzeugt: 2016 Parametern: Trichterlänge: 1200 mm Trichterbreite: 840 mm Motor: 18.5 kW Gesamthöhe: 3192 mm Länge: 2730 mm Breite: 1752 mm Ofengewicht: 3100 kg
Pinacho Lathe S-90/180 - With digital display - Width: 200 cm - Depth: 85 cm - Height: 160 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Rachner Pile Turner F 1800 PA / R+S Completely overhauled, large opening width, 1800 mm Platform size 800 x 1270 mm with pile ventilation and vibrator. Technical condition almost as good as new after overhaul. ( 2024 ) Inspection and testing are possible at any time.
Key data: 150 mm
ALDURO Metal Band Saw MBS-180SK Section cap. up to 180 mm round 4 belt speeds 22 / 33 / 45 / 65 m/min. Vise opening 260 mm Cooling system Hydr. Lowering Motor power 0.75 kW, 400 V Weight approx. 130 kg 0041 62 922 68 28
Swivel drive, pneumatic cylinder, rotary vane drive, swivel module -Type: DSR-16-180-P -Shaft diameter: 10mm -Number: 1x available -Dimensions: 78/78/H57 mm -Weight: 0.3kg
Pile turner Rachner F 1800 PA/RS; Condition obsolete; Platform size 800x1270mm; Opening width 1800mm; Vibration function; Blowing air with extra large blower 7.5KW; Side ruler; Load capacity 1000kg. Pile turner Rachner F 1800 PA/RS; condition rebuilt; size 800x1270mm; max.pile hight 1800mm; jogging; airing with big blower 7,5KW; adjustable aligning gauge; carrying power 1000kg.
Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 204 x 42 mm -Clamping depth: max. 180 mm -Dimensions: 480/340/H165 mm -Weight: 55 kg
Dough machine Diosna Model: SP 180 D Kneading machine mobile with 2 brakes 2 timers, 2 gears Spiral mixer with return button Flour dust hood in silo design Stainless Steel Boiler for max. 180 kg of dough, Connection: 400V, 32A-CEE plug Approx. dimensions: 840 x 1250 x 1400 mm, WxDxH Used machine cleaned more dough machines in stock!
roller curve right or left tight division 90°/190°-660-600 IR500 RA2314 Make: Running direction: 90° right running/ left running Roller width (RB): 600 mm conical, plastic coating Nominal/outer width (NB): 660 mm Center roller axle distance: 60mm, 3mm roller distance Inner radius (IR): 500 mm Overall height frame: 120 mm Height including motor: 400 mm Motor MOVI-Mot 3x300-500V 0,25kW 1400 u/min max Brake 220-240V Gear motor: SEW Conveyor speed: 0.6 m/s 2 90° curves can be screwed together to 180° Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 500 Nominal / outside width in mm: 660 Roll width in mm: 600 angle: 90° Driven: YES scope ...
Clamping angle for workpiece clamping -Dimensions: 180/70/H100 mm -Thickness: 18 mm -T-slots: 12 mm -Surface: milled -Weight: 3.5 kg
maximum number of results exceeded
please refine your search
