aster 120 or used for sale

General SKULT0103 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume150 Ltr. Motor0.12 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity120 l. (150 l.) Vessel sizesø 492 x 672 mm Dished bottomcheck Dished top sidecheck OutletG1 With jacketcheck 21 l. Max. temperature2 / 95 °C With propellor stirrercheck Magnetic ZETA, Type BMRT 50 W EX S Dk Motorcheck 0,12kW 230/400 V 900 rpm (Ex) Speed mixing shaft125—860 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 Information TypeSolvent Tank Year of construction2021 Mounted on legsmobile skid With switchcheck With switchgearcheck Total height± 1,3 m Extra SpecificationsThe tank is equipped with a pressure gaug ...

General SKU230N088 LocationBarneveld MakeReko Industrial Eqiupment BV TypeInternally-fed drum screen TI-S 1200/4000 No.TZX0006/0002/S Main Features MaterialStainless steel Motor1.5 KW Length4000 mm Specified Features - Rotating sieve MaterialStainless steel Rotating sieverotating drum sieve Sieve sizesdia. 1200x4000 Motor1,5 KW, 230/400 Volt Sieve perforation3 and 4mm Information Year of construction2008 Floor space5,0x1,6 M Total height2,5 M Weight2000 KG Extra SpecificationsINTERNALLY FED DRUM SCREEN Separation of solids from waste and process water by means of an internally fed rotating perforated drum strainer. Rotating sievesRekoSieves > Rotating sievesBrand > Reko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

pressure: 120/15 t distance between columns: 860 mm stroke: 170 mm table-size: 860 x 600 mm dayligth: 350 mm max. distance table - ram: 520 mm ram head dimension: 860 x 600 mm hole in the table: 200 x 140 mm table height over floor: 850 mm total power requirement: 25 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2,3 x 1,7 x 3,4 m Maximum ram pressure: 120 kN Maximum pull-out pressure: 15 kN Sick light curtain Safety distance: 180 mm Maximum overrun: 15 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg 1200T 800-150 / Vertical injection moulding machine with the rotary table Year of Make: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2500 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Air Valve x 6 Hydraulic core pull x 6 Control with hot runners Hardened injection unit - Bimetal Rotary table diameter: 1200 mm Kistler Sensor - Tool Pressure Control Machine has been serviced by the authorized service Arburg in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92x1.61x3.78 m Drive: Pumps/motor: 22 kW Heating capacity: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before they are sold. It is possibl ...

Table dimensions ( x-y/mm) 1120 x 600 Stroke ( X/mm) 1020 Stroke ( Y/mm) 600 Stroke ( Z/mm) 600 Type of controll selca s4040dh Number of spindle per minute 40 - 8000 Number of inserts in the tool magazine 24 Weight ( ton) 7 Chuck connection iso 40 Maximum loading weight ( ton) 1 Number of axes 3

1.0 St. gebr. Blow Molding Machine Manufacturer: Fischer - W. Müller Type: FMB 3-120 Year of Make: 1999 Clamping force: 120 tons Extruder Type: 120/24 WT Storage head: BFKS25 corresponds to approx. 17.75 kg The machine can hold drums of up to a size 200 liters. Video available!

Sleevadora from the brand FILLING CLOSING LABELLING model TI/120. Power supply: 380 V (50 Hz) Year 2012. Maximum temperature: 250 ºC Features: Usable width tape 80 mm Tape length 2750 mm

Control Heidenhain iTNC 520 Travel X/Y/Z: 1200 x 900 x 500 mm Spindle speed 16,000 min-1 Tool magazine for 30 Wkz. + additional magazine for 57 Wkz. HSK-A 63 IKZ 40 bar Chip conveyor Measuring Probe Heidenhain Blum Laser System

Center height: 700 mm Center width: 1800 mm Gr. Circulation Ø over bed/in offset: 1300/1740 mm Rotary Ø over support slide: 740 mm 12 spindle speeds: 3 - 135 rpm 12 feeds: 0.15 - 2 mm/rev Upper support adjustment: 350 mm electr. Connection: 380 V, 6.6 kW Weight approx.: 5.5 t Space requirement: 3800 x 1600 x 1700 mm

Manufacturer: Comiflex Model: Vale 1208 Year of Manufacture: 2011 Machine Type : 8-Colour Gearless Flexographic Printing Machine Number of colours: 8 Condition: Immaculate, manufacturer-serviced only, full service history available Print Specifications - Material width: 1280 mm - Print width: 1200 mm - Minimum repeat length: 380 mm - Maximum repeat length: 840 mm - Machine speed: 300 m/min Anilox Rolls (8 included) - Face length: 1260 mm - Engrave length: 1240 mm - Outside diameter (OD): 171.88 mm - Inside diameter (ID): 149.722 mm Sleeves (8 included) - Inside diameter (ID): 114.708 mm - Face length: 1210 mm Ink and Registration Systems - Ink pump: Phonematic with autowash system - Camera and registration system: FIFE Find more here - / Contact us at -

CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine.

Capacity 5.4T /12000 lbs Stroke 1626 mm weight 150t

Cutting length: 4.300 mm Cutting height: 1.800 mm Motor output: kW Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: ca. 600 kg kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade width max.: 120 mm Weight: 350 kg Motor output: 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding. Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80120175cm - Net/gross we ...

Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1540, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: Übertrieb scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone  ...

Hydraulic press brake 120x3100

2 labeling units for applying a lid and a body label,, Dispensing width SES 80: 85 mm, SES 120: 125 mm,, dispensing speed: 0 - 60 m/min,, Unwind: diameter: 300 mm,, spool: diameter: 170 mm,, was used to label plastic cans.

Used machine Rows of holes Dowel drills Manufacturer: Ganner Type: Gannomat 120 Year of manufacture: unknown Power: 1.1 kW Working range: Drilling stroke: 120 mm

hydraulic press with hot platens by with thermal oil model COLOMBO REMO second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm. 80 max. thrust Ton. 120 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 3 heating by with thermal oil weight kgs. 5500 volt. 380/50

CONTROLS   CNC controls SIEMENS TECHNICAL SPECIFICATION   Max. diameter of tube: 120 mm   Max. bending radius: 180 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 8000 mm   space requirements -front/back-: 2600 mm   total height: 2300 mm   total weight approx.: 16500 kg machine in a very good condition Machine in very good condition Special features: - Free-form bending option - Laser scanner for securing the bending area - Foot pedal for safe start - Bending simulation Automation: - CNC control BEND MOTION CONTROL - Automatic mandrel lubrication as MMS Retrofit 2018: - Control system retrofit - Cables replaced - Bending head overhauled - Guides replaced - complete equipment (see photos) (Ø22x2, Ø28x2, Ø38x2.6, Ø42.4x2.6, Ø48.3x2.6, Ø60.3x2.9, Ø76.1x3.2, Ø88.9x3.2, Ø114.3x3.6 ...

A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible.

Key data: 394 KW, 493 kVA, 400 V

Polyma Diesel Emergency Power MA 1205005E65S Diesel generator from 1993, 1,336 operating hours, Container with control, 2 x 2,000 l tanks, chimney 1 available 394 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: MarelliMotori M7B3165KA52580, 525 KVA Manufacturer: Polyma Model No.: MA 1205005E65S Type: Diesel Emergency Power Generator Container Serial Number: 192023 Power [KVA / KW]: 493 / 394 Engine: MAN D2842LE (1992) Engine power: 424 Engine Serial Number: 49369180944201 Year of Make: 1993 Engine hours: 1,336 Total container weight [kg]: 11,000 Container dimensions [m]: 9.12 x 2.44 x 2.59 AC generator MarelliMotori M7B3165KA52580 Manufacturer: MarelliMotori Model No.: M7B3165KA52580 Type: AC Synchronous Generator Serial Number: MU5267 Power [KVA]: 525 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 759 Speed [1/min]: 1,500 Year of Make: 1993 Weight [kg ...

A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026.

CNC Machining Center Hedelius C60S -1200 Control: Heidenhain iTNC 530 Year of Make: 2016 Travels: X-axis 1,200 mm Y-axis 620 mm Z-axis 520 mm Clamping area: 1,550 x 600 mm Table load: approx. 1,500 kg g Mount: SK 40 Tool magazine: 30 – compartment Spindle speed: 30 - 6,000 rpm Accessories - Screen filter system KM500 - High-pressure pump - Chip conveyors - Machine hood - LTA suction

total power requirement: 50 kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 980 mm : kg weight of the machine ca.: 0.95 t Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: EMCO Model: MC 120-60 Year of Manufacture: 2008 Type of Machine : Machining Center Spindle hours: 10,459 CNC Control: Fanuc 18i-MB Tool holder: SK40 Condition: Used, fully functional Axis Travel - X axis: 1,200 mm - Y axis: 600 mm - Z axis: 500 mm - 4th axis: Yes, installed - 5th axis: No Equipment and Features - Tool magazine: 30 positions - Band filter: Yes - Chip conveyor: Yes - SK40 toolholder package included - Fully operational Lang Eco Compact 10 automation system with 10 vices included - Custom-built slatted loading rack for ergonomic loading and unloading of machine and - automation Find more here - / Contact us at -

Strasbourg Labeling Service SES-120-II Hotmelt labeler for square and round containers, configured for 0.1 ltr, 0.25 ltr, and 0.5 ltr pocket bottles, etc., for square containers with 2 labels or for round containers with one label., Output up to 4,000 units per hour, worked until the end... ran only 10 times a year

Tank car Diosna SP 120 Suitable for spiral mixers: Diosna SP 120 Tank car overhauled drivable

Work table AT 1200 with stainless steel plate and sliding doors Work table Gastro bakery table Stainless steel worktop Stainless steel version with 2 sliding doors Used device as good as new

Spiral mixer Diosna SP 120 D compact kneading machine for individual doughs! 2 timers Stainless Steel Boiler and Spiral Robust technology Connection: 400 V Used machine overhauled with warranty

weight max. in kg: 1200 kg stroke: 3600 mm fork length: 1150 mm battery: neu in 2022 / 48 V total power requirement: - kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2 x 1 x 2,4 m DUPLEX Mast Side Shifter Connection for auxiliary equipment Battery new in 2022 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process Vessels Stainless Steel Mixer/Melting Tank Manufacturer: Dibir Group Srl Capacity approx. 120 litres Electrically heated, thermal oil Frequency-controlled agitator Temperature control

Spiral mixer Diosna SP 120 D compact kneading machine for individual doughs! 2 timers Spiral mixer with 2 gears Stainless Steel Boiler and Spiral for max. 120 kg dough Connection: 400 V Used machine overhauled

Spiral mixer Diosna SP 120 D 2 timers Spiral mixer with 2 gears Stainless Steel Boiler and Spiral Robust technology Connection: 400 V Used machine with warranty

Spiral mixer Diosna SP 120 D compact kneading machine for individual doughs! 2 timers Spiral mixer with 2 gears Stainless Steel Boiler and Spiral Robust technology Connection: 400 V Used machine overhauled with warranty

SB Sales Shelf 1200 with lighting 4 beech wood grates 12 Removal Flaps bottom with shelf Connection 220V Used device

Spiral mixer Diosna SP 120 D compact kneading machine for individual doughs! 2 timers Spiral mixer with 2 gears Stainless Steel Boiler and Spiral Connection: 400 V Approx. dimensions: 800 x 1270 mm WxD Used machine overhauled with warranty

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

Spiral mixer Diosna SP 120 D compact kneading machine for individual doughs! 2 timers Spiral mixer with 2 gears Robust technology Connection: 400 V Approx. dimensions: 800 x 1270 mm WxD Used machine

diameter range 2-7 mm shaft length under head 120 mm cutting length 140 mm output - pieces/min 300

TECHNICAL DATA: Machine for making pallets Usable work surface: 1200 x 1200 mm Motorized loading roller conveyor: 4500 mm Motorized unloading conveyor: 2500 mm + 3000 mm (free-running) Installed power (cutting unit): 9 kW EQUIPPED WITH: Package Holder 01 Lower conveyor belt for wood waste: 8000 x 800 mm + Tiltable end ramp: 2500 mm

used spiral mixer Eberhardt Maximat MAAN 120Manufacturer : EberhardtType: Maximat MAAN 120400 V 50Hz 8,55kW 20,5 ASpiral kneader Eberhardt Maximat MAAN 120 extendable, 120 kg dough, 2 clocks, with 2 stainless steel kettles, stainless steel spiral,This is a high-quality professional device, which is mainly used in bakeries and kitchens for kneading dough in large quantities. Brief overview: Eberhardt Maximat MAAN 120Manufacturer: Eberhardt GmbH (a German manufacturer of baking technology based in Neckarsulm)Type: Stationary kneading machine / spiral mixerKneading capacity: Up to 120 kg wheat dough

Spiral mixer Eberhardt Maximat MAAN 120 extendableManufacturer : EberhardtType: Maximat MAAN 120400 V 50Hz 8,55kW 20,5 AUsed spiral mixer Eberhardt Maximat MAAN 120 extendable, 120 kg dough, 2 clocks, with 1 stainless steel kettle, stainless steel spiral,This is a high-quality professional device, which is mainly used in bakeries and large kitchens for kneading dough in large quantities. Quick overview: Eberhardt Maximat MAAN 120Manufacturer: Eberhardt GmbH (a German manufacturer of baking technology based in Neckarsulm)Type: Stationary kneading machine / spiral kneading machineKneading capacity: Up to 120 kg

Beater Herlitzius (A 120) for bread slicerKnife (A 120) from Herlitzius for bread slicer, is used. Dimensions W.: 45 cm, H.: 28 cm (photo may vary)Herlitzius knives are known for their high quality and are often used in commercial bread slicers. Model A 120 presumably refers to a specific knife size or design that fits different machines. These knives are typically made of high-quality steel and need to be sharpened or replaced regularly to ensure a clean cut.

Spiral mixer DIOSNA SP 120 D Product description Manufacturer: DIOSNA Dierks &, Söhne Type: SP 120 D Condition: used, functional, baker's condition Material: Stainless steel kettle, galvanized kneading spiral For up to 120 kg dough (approx. 75 kg flour) Manual control 2 clocks and 2 speeds Incl. protective cover Motor power: 380 V / 16 A / 50 Hz Dimensions: width 80 cm, depth 125 cm, Height 130 cm See pictures for details.

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1000mm -Cross section: 120 x 40 mm -Recording: 500 mm (see sketch in the photos) -Transport dimensions: 1155/700/H120 mm -Weight: 132 kg

Lifting kneading machine Diosna S 120 Plus Description A used lifting kneading machine Diosna S 120 Plus Manufacturer: Diosna Dierks &, Söhne GmbH Type: S 120 Plus Condition: Machine is revised and repainted Lifting kneader Diosna S 120For max. 120 kg dough With 1 automatic timer Machine is revised and repainted With 2 gears, slow and fast With stainless steel kettle With flour dust cover Mobile on castors with brake

Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton

Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Ejector stroke in ram: 150 Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton