aster 120 or used for sale

Dimensions (L/W/H): 3600x1650x2150 mm Weight: 6500 kg Total power requirement: 52 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8500x1800x2150 mm Weight: 6000 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5200x1650x2250 mm Weight: 9000 kg Total power requirement: 45 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2150 mm Weight: 7500 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2250 mm Weight: 7900 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 2580; Engine: Perkins 1206-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A; Water Tank Volume [l]: 380

We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Bito, Type PRO Suitable for the base plate L; which are mounted on the shelf stand P1-P3. The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.05 kg | Piece Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Hydrovar + motor without pump, HV3.3 f/120c + LM100RBM14/330, Lowara, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...

Can depalletizer TMG Impianti Type: PalPaq Model Vega 120 B capacity: approx. 50.000 cph year of manufacturing: 2014 total installed capacity: 13,5 kW, 37,5 A pressure compressed air system min./max.: 6-7 bar compressed air consumption: 330 Nl/min machine dimension: please see layout weight: approx. 6.900 kg for can sizes: Classic 330 ml: D.66,3 h.115 mm - can type: 211 / 202 Classic 500 ml: D.66,3 h.168 mm - can type: 211 / 202 Classic 568 ml: D.66,0 h.177 mm - can type: 211 / 202 Sleek 330 ml: D.58,1 h.145 mm - can type: 206,5 / 202 Sleek 355 ml: D.58.1 h.157 mm - can type: 206,5 / 202 Slim 150 ml: D.53,3 h.88 mm - can type: 202 / 200 Slim 200 ml: D.53.3 h. 111 mm - can type: 202 / 200 Slim 250 ml: D.53.3 h. 134 mm - can type: 202 / 200 pallet size: 1170 x 1240 mm

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 521 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 392 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 408 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 544 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEGAPLOT XTR PRO 1200 CNC foam cutting machine was built in 2020 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine enables precise cutting of any shape in a wide range of rigid foams, soft foams and rockwool. Cutting is performed fully automatically by means of an endless wire, which accelerates to a speed of 280 km/h. Project files, including shapes and their layout, can be prepared in any graphics program (CorelDraw, AutoCAD etc.). This is because the advanced FastWire software supports all major file formats. The MEGAPLOT XTR PRO upholstery foam cutting machine is also equipped with a controller which enables simulation of the cutting process and setting of the machining parameters with their change during the cutting. All this makes the offered machine an excellent choice for businesses producing, among others, insulation elements, packaging and upholstered furniture. Tec ...

SANDRETTO MEGA T 1200

Machine Type: Honing Machine Manufacturer: Pemamo Type: MDR 120 E Year of construction: 1999 / Commissioning 2003 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 2.850 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference number M-PEM-0126 DESCRIPTION We offer you a used honing machine from the manufacturer Pemamo. Incl. adapters 1040-510 and 1040-11-20 see last picture With fine adjuster. Weight: 135kg Further dates will follow. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

NJP-1200C automatic capsule filling machine was built in 2022 in China by Guangdong Rich Packing Machinery Co., Ltd. Machine in very good condition, kept in a temperature and humidity controlled room. All moving parts were systematically lubricated according to the manufacturer’s recommendations. The NJP-1200C capsule filling machine is used in the pharmaceutical industry for mass production of medical products, i.e. drugs, supplements, etc. It enables fully automatic filling of hard capsules of size 00 and 0 with products in the form of powder or small granules. In one working cycle, empty capsules are fed, sorted, filled and sealed. The reliable design made of high-quality stainless steel meets stringent sanitary requirements, as well as maintaining high stability throughout its entire service life. All this makes the offered capsule filler an excellent choice for increasing the e ...

The machine is in good technical condition, after prior agreement it is possible to test it. - Nominal forming force: 120 t Working length: 3106 mm CNC control Delem (graphic 2D programming) Automatic calculation of bending sequence and collision detection Back gauge X axis with 2× manually adjustable stop fingers CNC electromotive height adjustment of the back gauge (R axis) CNC electrically controlled table deflection Upper tool adapter ROLLERI Equipment and accessories: - Front protective device (tilting door) - Rear protective device (sliding door) - 1× freely movable two-hand / foot control - Operating instructions including CE declaration

2 x Pallet trucks, Electric pallet trucks with standing platform, Electric pedestrian pallet truck 2 to., Jungheinrich, ERE 120 – used - : Price per piece from location: Pos 6: 2.250.-€ (net)! Pos 5: 3.950.-€ (net)! Manufacturer: Jungheinrich Type: EUA 120 Year of construction 2020 Load capacity: 2,000 kg Maximum stroke up to 122 mm Load center of gravity: 600 mm Travel speed: 9 km/h without load Lifting speed: without load 0.04 m/s Battery voltage: 24 V Battery capacity: 250 Ah Weight incl. battery: 630 kg Overall length: 1,847 mm Operating hours: see list, as of January 2026 – a few hours have been added in each case Incl. charger Condition: good Available: immediately Location: Erfurt, later Augsburg camp Pos 6 / 5 / more photos of the other devices on request! BRA 1/26 Year of construction ERE01 98285577 Pallet truck EUA 120 9.600 2020 ...

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 18 mm -Number of teeth: 120 teeth -Weight: 6 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Dimensions: W800/H1200/D300 mm -Braids: several -Weight: 62 kg

Reciprocating saw, dovetail saw, tiger saw, saber saw -Flex reciprocating saw: SK -Nominal power input: 1200 W -in :suitcase -Dimensions: 610/120/H250 mm -Weight: 5.8 kg

Container corner fitting, container corner, container parts -Number: 18 corner fittings available -Price per piece - Die stamping: DL TR 08 1118 / DL BR 08 1124 -Height: 160mm -Dimensions individually: 178/120/H160 mm -Weight: 11kg/pcs

Compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Drying capacity 1200 L / min -Max. Pressure: 13 bar -Operating voltage: 240 V -Dimensions: 485/350 / H450 mm -Weight: 23.5 kg

Bezel moving, moving bezel, steady rest, lynette -Bezel: driving -Max. Passage: Ø 120 mm -Center height: 150 mm -Drawing: with the photos -Dimensions: 280/390/H470 mm -Weight: 18.5kg

Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 120 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 165/40/H40 mm -Weight: kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 1200 mm -Width: 800 mm -Height: 170 mm -Plate thickness: 30 mm -with: support ribs -Weight: 328 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 315/120/50 mm -Height: 21 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 1.5 kg

Stick electrodes 3.2 x 350 -Type: Phoenix 120 K -Price: per package -Number: 4 packages available -Weight per package: 4.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 75 mm -Piston rod: Ø 40 mm -Stroke: 120 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 485/105/H105 mm -Weight: 11 kg

Stick electrodes 3.2 x 350 -Type: Phoenix 120K -Weight per package: 6.2 kg

Stick electrodes 4.0 x 450 -Type: Phoenix 120K -Price: per package -Number: 9 packages available -Weight per package: 5.9 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 16 mm -Total length: 250 mm -Total length extended: 330 mm -Price: per piece -Number: 2x available -Dimensions: 56/56/H250 mm -Weight: 1.5 kg/piece

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 120 mm -Piston diameter: 38 mm -Piston rod: 20 mm -Total length: 305 mm -Total length extended: 425 mm -Price: per piece -Number: 10x available -Dimensions: 80/80/H305 mm -Weight: 2.9 kg/piece

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate, straightening bench ... -Number: 1 prism available -Dimensions: 100/120/H60 mm -Weight: 5 kg

Stick electrodes 2.5 x 250 -Type: Phoenix 120K -Price: per package -Number: 16 packages available -Weight per package: 3.3 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 120 mm -Admission: -Drawing: in the photos -Dimensions: 200/70/H130 mm -Weight: 4 kg

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg