ash 160 used for sale

crane block, crane hook, load hook, single hook -Crane hook: load hook with holder -Load capacity: kg -Dimensions: see photos -Dimensions: 490/160/H1090 mm -Own weight: 81 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 29 mm -Dimensions: see photo technical drawing -Dimensions: 160/50/H22 mm -Weight: 1.2 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 160/50/H22 mm -Weight: 1.5 kg

wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: Ø 160 mm -Hole: Ø 60 mm, bolt circle Ø 85 x 9 mm -Number: 2x cutters available -Price: per piece -Dimensions: Ø 160 x 40 mm -Weight: 3.6 kg/piece

hydraulic unit, hydraulic pump, hydraulic pump, universal unit -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Formwork nail, formwork nails, strip nails, nail strips, brad nails -Manufacturer: Collated Fasteners, Strip Nails 1 Carton/ 500 Pieces -Type: SNK 1985 5.0 x 160 mm smooth -Price/Fee: complete -Transport dimensions: 260/160/H150 mm Total weight: 12.1 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder stroke 160 mm -Piston rod: Ø 50 mm -Dimensions: Ø 75 x 310 mm -Weight: 8 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder stroke 160 mm -Piston rod: Ø 40 mm -Dimensions: Ø 75 x 310 mm -Weight: 6.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 160 mm -Type: unfortunately without type designation -Piston rod: Ø 25 mm / M20 -Holes: Ø 25 mm -Dimensions: Ø 70 x 410 mm -Weight: 6.4 kg

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 160 mm -Thread: M16 -Bolt circle: Ø 133 x 13 mm -Dimensions: Ø 160 x 210 mm -Weight: 10.7 kg

three-phase motor, electric motor -Manufacturer: VEM, electric motor type KPER 160 M4 -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP54 -Design: B5 -Dimensions: 525/260/H320 mm -Weight: 87 kg.

Rolling jaws, floating center jaws, pull-down jaws, machine vice jaws -Clamping jaws: 2 pieces ground steel jaws width 160 mm -Hole spacing: 100 mm / Ø 11 mm -Shipping/Price: complete -Transport dimensions: 160/65/36 mm -Total weight: 2.8 kg

Electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LA766-4AA60-ZN00 160L -Power: 15 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Dimensions: 590/315/H360 mm -Weight: 83 kg

rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck -Type: UTA 160 N -Three-jaw chuck: Röhm Ø 200 mm -Spindle bore: Ø 38 mm -Dimensions total: 625/580/H285 mm -Weight: 122 kg

Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring conical brake disc unused -Type: 089 746 84 KB 160 RIW -Dimensions: see photos -Dimensions: Ø 275 x 40 mm -Weight: 1.0 kg

Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Feed flange: mounting flange -Outside: Ø 160 mm -Recess: Ø 130 mm -Hole: Ø 25 mm -Bolt circle: Ø 139 x 10 mm -Dimensions: Ø 160 x 40 mm -Weight: 2.6 kg

Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg

Conveyor belt rollers, transport rollers, roller conveyor, carrying rollers, roller block -Roller block: with 4 polyamide rollers, diameter 32 mm -Rollers: 4x Ø 75 x 40 mm -Transport width: 160 mm, adjustable, see photos -Shaft: Ø 25 mm, supported on both sides -Dimensions: 350/75/H130 mm -Weight: 6.2 kg

Packing: ? mm Shipping weight: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height 2200 mm Width 1900 mm Length 2200 mm Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Loading Loading integrated into the machine Throat diameter 160 mm Wolf type: Simple wolf Auger Stuffing Feeding System Hopper Throat Design: Stainless Steel Material of the feeding screw Stainless steel, acid-resistant

Square, locksmith square, hair square, precision hair square -Angle stop: Leg length 250 x 160 mm -Quantity: 1x angle stop available -Dimensions: 255/160/H22 mm -Weight: 0.5 kg

Machine Details Stock-No. 1105-04032 Type of machine Vertical Turning Machine Make INDEX Type V 160 C Year of manufacture 2005 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis ex site Price Technical details turning diameter 250 mm swing diameter 300 mm turning height 210 mm control SIEMENS 840 D Travel -X Axis 490 mm Travel -Z AXIS 260 mm external spindle dia. In forward position 110 mm turning speed range - spindle 5000 rpm Turret (X-Stations) 12 weight of the machine approx. 7.3 t dimensions of the machine approx. 3.2 x 2.3 x 2.3 m Accessories Chip conveyor Coolant system Additional information CONTROL SIEMENS 840 D WHIT TURRET 12 POSITION VDI 30 AND 2 FIXED TOOLS SUPPORT EXTR MOOWING TOOLS AND C AXIS WITH LOADING AUTOMATION

Hydraulic vise, machine vise, NC compact clamp -Handover in its current condition as inspected The vise has no spindle and is therefore sold as a source of spare parts. -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg

Dosing bunker with chain belt discharge Manufacturer: HUBER Fördertechnik Type: RHKG160/8AA Year of Make: 2001 specifications: Machine dimensions: Length: 8,500 mm, Width: 2,400 mm, Height: 2,500 mm Center distance: approx. 8,000 mm Conveyor width: 1,600 mm Side wall height: approx. 1,550 mm Capacity: approx. 20 m³ Drive power: 0.75 kW for the conveyor belt Drive power: 4.0 kW for the dosing station

electric motor, three-phase motor -Power: 13/17 kW -Speed: 1470/2950 rpm -Shaft: Ø 42 mm -Design: B5 -Protection class: IP 54 -Dimensions: 620/350/H400 mm -Number: 3x motors available Price: per piece -Weight: 130 kg

Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg

Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg

Log band saw Canali Braun 1600 round timber feed wagon saw roller conveyor year of construction.1994 new control

Complete plant Bogli 1600 round timber feed saw wagon roller conveyor shearer

Machine vice, sturdy vice, drill press vice -Jaw width: 150 mm -Clamping depth: max. 160 mm -Dimensions: 500/270/H170 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 190 mm -Clamping depth: max. 160 mm -Dimensions: 630/200/H160 mm -Weight: 55 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 18 kg

Palettenheber / Pile Hoists - Stack Lift Baumann NUP 1600 Baujahr / Year 2005 - Serial-No. 52970 Format / Size max. 1500 x 1185mm Hebekapazität / Loading capacity max. 1600KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

end mill, end mill, milling cutter -Outer diameter: 160 mm -Teeth: 16 -needs to be reground -Weight: 10 kg

Key data: 1120 mm, 345 mm, 550 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 rpm Feed range 16-800 mm/min Travel x 1120 mm ; y 345 mm; z 550 mm Connected load approx. 14.5 kW Accessories: 2 counter bearings Electric clamp horizontal and vertical spindle Vertical milling head SK50 with snap bearing

Electric motor Manufacturer : VEM Model: K21R K21R 160L 4 TWS HW Power: 11 kW NEW, unused from old stock see pictures for more details.

Key data: 128 KW, 160 kVA

We currently offer: Number 29 Perkins 1300 generator set Generator Stamford Power: 160 KVA / 128 KW Hz 50 RPM 1500 ABR Control SX460 IP 22 Year of manufacture 1997 Hours: 8234 Connection 63A, 32A Metrics: L: 4.00m W: 1.35m H: 2.00m Weight: approx. 3500 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Rolling jaws, floating center jaws, low-profile jaws -Dimensions: 160/31/H63 mm -Weight: 3 kg

External vibrators Vibrators vibrating motor Manufacturer: Knauer Engineering Type: NZHF 160 1650 W As good as new The product is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details.

Electric motor Manufacturer : VEM Model: K21R 160 M4 Power: 11 kW NEW, unused from old stock see pictures for more details.

Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Heat exchanger: Oil cooler, shell and tube heat exchanger -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg

Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive, multi-axis controller -Manufacturer: Gessmann, Joystick Multi Axis Controller -Type: 0208873 EP/160 -Quantity: 1x Joystick available -Dimensions: 83/83/H165 mm -Weight: 0.6 kg

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.