ash 160 used for sale

Ref. -No.: 10286 Manufacturer: STARRAG HECKERT Year of construction: 2007 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 24139 X-Travel: 2800 mm Y-Travel: 2100 mm Z-Travel: 1900 mm Table Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mm Max. Tool Weight: 35 kg Workpiece Diameter At Full Load: 110 mm Tool Piece Magazine With: 60 Pcs./pcs. Tool dimensions (with occupied adjacent spaces): 125 mm Numbers Of Pallets: 2 Operating hours: 26180 H spindle running time: 26180h 43m 46s h/m/s automatic mode: 28559 H on time: 120 H pallet change time: 60 s Further information: internal coolant supply

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 160 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Total length: 340 mm -Total length extended: 500 mm -Dimensions: 65/65/H340 mm -Weight: 2.25 kg

Round cylinders, pneumatic cylinders, air cylinders, standard cylinders -Stroke: 160 mm -Piston: Ø 20 mm -Piston rod: Ø 16 mm -Number: 3x available -Price: per piece -Dimensions: 45/365 mm -Weight: 1.55 kg

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: GR199 CF-D-160-10 -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H54 mm -Weight: 6 kg

7electrical transformer 1200 kva ,630 kva 400kva 1600 kva HIGH VOLTAGE 1-2 5381V 2-3 5250V 3-4 5118V

2 finger parallel gripper with return spring, PGN+ 160-2-AS-SD, Schunk, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. 2 finger parallel gripper with return spring, external closing, PGN+ 160-2-AS-SD, Schunk, second-hand - the gripper has been tested and is fully functional - one piece is missing a cover plate which will be replaced by us. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good and tested condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude w ...

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: CF-D-160-10 -Shaft: Ø 22 mm (pre-drilled) -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H70 mm -Weight: 9 kg

Recon Z4R212 / II34WE / B80893 / 35000l/min Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Long link roller chains, transport chain, roller chain, drive chain -per chain length: m -Pitch: 160 mm -1x chain: 5.1 m available -Weight 60 kg -1x chain: 3.5 m available -Weight 45 kg -2x chain: 9.92 m available -Weight: 81.5 kg/pc. -Price: 55 Eur/m -Weight: 9.5 kg/m

Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz

Intensive kneader, Stephan, type TK 160

Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg

Three-phase motor, electric motor -Motor: unused -Voltage: 500 volts -Power: 11 kW -Speed: 2920 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 500/345/H300 mm -Weight: 65 kg

echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Electric motor, three-phase motor -Motor: unused -Power: 18 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 640/390/H360 mm -Weight: 110 kg

Control Rexroth System 200 BTV30 Circulation diameter over bed: 160 mm Circulation diameter over face carriage 250 mm Chuck diameter 160 mm Turning length 300 mm Spindle speed 8000 min-1 12-speed revolver with attached Competition. Workpiece conveyor belt Conveyor Various tool holders

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons

Banding machine BVM 16040 L; good condition; Welding width 1600mm; Product height 400mm; product scanner; Labeller; Conveyor belt 5600mm; Intermediate belt 1500mm; Shrink tunnel SC 16060 SD; Link band; cooling fans; Outlet roller conveyor 2000mm. Banderoling machine BVM 16040 L; good condition; sealing width 1600mm; product hight 400mm; scanner; Labeler; infeed belt 5600mm; intermediate belt 1500mm; shrink tunnel SC 16060 SD; link belt; cooling unit; Outfeed Roller Conveyor.

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/330/H270 mm -Weight: 80 kg

Pneumatic cylinders, air cylinders, standard cylinders -Stroke travel: 160 mm -Piston diameter: 125 mm -Piston rod: 16 mm -Air inlet and outlet: adjustable -Quantity: 2 pieces available Unit price: 95 euros VAT -Dimensions: 140/140/H440 mm -Weight: 8.5 kg

Korimat KA 160 autoclave, 120 litres, 2.5 bar, MC control, autoclave for sterilisation with core temperature measurement, as a pressure pressure cooker for cooking meat, vegetables, soups and ready meals, electrically heated, circular marbled surface.

Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992

Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 670/400/H320 mm -Weight: 108 kg

Electric motor, three-phase motor -Power: 18.5 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 600/320/H410 mm -Weight: 134 kg

Bezel, setting stick, lynette -Max. passage: Ø 160 mm -Peak height: 220 mm -Edition: Gray cast iron -technical drawing included with the photos -Dimensions: 450/100/H500 mm -Weight: 33 kg

Seydelmann mixing grinder MG 160-B meat mincer with 160 mm hole plate diameter almost completely made of solid stainless steel including loading device 2-speed working worm 1-speed mixing paddle with 2 mixing arms forwards and reverse, approx. 300 liters hopper capacity approx. 150 kg mixing capacity including brand new cutting set including separation unit

Electric motor, three-phase motor -Power: 5/7 kW -Speed: 735/1470 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 EX -Brake: with temperature sensor -Dimensions: 920/400/H330 mm -Weight: 175 kg

Oil filter, filter cartridge -Ecoair BN: 16013 -Identical: with Atlas-Copco 1202835300 -Dimensions: Ø 140 x 300 mm -Number: 42 pieces available -Price: per piece -Weight: 2 kg

Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Clamping angle for workpiece clamping -Dimensions: 210/160/H200 mm -Clamping width: 40 mm -Surface: milled -Weight: 6 kg

Bearing bushings, half-shell, drill bushing -Number: 6x AL 16065 (John Deere) Price: complete -Weight: 2.1 kg

Romaco-Siebler HM1/160 vertical strip packing machine for tablets, 3 lanes, maximum foil width 170 mm, includes format parts for tablets with dimensions of 7.2 x 5.6 x 17.5 mm and 11.4 x 6.31/WR8.5, foil reel core diameter 76 mm, maximum foil reel diameter 450 mm, Siemens SIMATIC S7-300, excellent working condition with only approx. 1600 running hours

Stainless steel grating mill

Three-jaw chuck, three-jaw lathe chuck -Clamping plate -Mouth size: Ø 160 mm -Quantity: 2x food available Price: per piece -Weight: 7 kg

Cloth rag, polishing wheel, grinding wheel -Diameter: 160 mm -Width: 25 mm -Hole: Ø 40 mm -Number: 12 brushes available -Price: per piece -Weight: 0.7 kg/piece

Cloth lapper, polishing wheel, grinding wheel -Cloth lapper with abrasive fabric: grain 220 -Diameter: Ø 160 mm - Width: 30mm -Intake: Ø 10 mm -Number: 8x brushes available -Price per piece -Weight: 0.4kg/pcs

Used fluid bed dryer mady by Bühler model OTWG-160, new 1996. Technical data: - Weight 1050 kg - Content m³: 2.7 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.

Pneumatic cylinder holder, bearing block, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: LSN-160 -Weight: 6 kg

Inductive sensor, electronic sensor Manufacturer: IPF Product type: IB 160100 -Quantity: 2 available Price: per piece -Weight: 0.1 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B45 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 3.9 kg/pcs.

x-travel: 1600 mm y-travel: 900 mm z-travel: 800 mm Control: Heidenhein iTNC table-size: 1700x850 mm taper ISO: ISO 40 turning speeds: 10000 U/min workpiece: Random 30 pos. table weight: 2000 Kg rapid traverse:: 20 m/min Internal cooling system: 20 bar total power requirement: 18 kW weight of the machine ca.: 18600 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B50 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 4.9 kg/pcs.

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, pressure gauge -Type: 0 to 160 bar -Screw connection: see photos -Dimension: 105/45/H145 mm -Weight: 0.8 kg

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: Screw-in temperature sensor -Measuring range: 0 to 160°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimensions: 330/260/H140 mm -Weight: 1.3 kg

Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,

Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor, thermometer -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 160°C -Measurement probe: Screw-in length approx. 200 mm -Transport dimension: Ø100 x 240 mm -Weight: 0.4 kg

Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...

Iseki ZM 160 S, intermediate axle mower (belonging to carrier vehicle unknown), built in 2002, incl. accessories shown: discharge plate, lifting shears, lifting cylinder with lifting shaft and lifting arms. More mowers and grass pick-up technology available! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...