ash 160 used for sale

; Gross weight [kg]: 5847; Engine: Perkins 4016TAG1A; Accessories: Control Panel, Including: Coolant heater and battery charger

; Power [PS]: 1496; Gross weight [kg]: 9119; Engine: Perkins 4012-46TWG2A; Accessories: Battery, Control Panel

; Gross weight [kg]: 10388; Engine: Perkins 4012-46TAG2A; Accessories: Battery, Control Panel

Diosna Spiral Kneader Type: SP 160 AD extendable spiral kneader for a maximum of 160kg of dough or for a maximum of 100kg of flour with 2 timers Automatic switching on and off via clocks Stainless steel flour dust cover 2 speeds (gears) slow and fast Boiler locking via pliers operated with hydraulics suitable for almost all doughs robust and strong Trade-in, delivery and assembly on request Vat capacity 260 litres

; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

; Gross weight [kg]: 5694; Engine: Perkins 2806A-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charge and coolant heater; Water Tank Volume [l]: 1132

; Gross weight [kg]: 4202; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

The original part is a main and KO extruder from Kuhne built in 2006, the system was extended in 2010 by an additional extruder from the SML (coating unit). Plant description: COEX cast film line with additional coating unit. The main plant is equipped with a co- and a main extruder. The coating unit with a main extruder. Processing of thermoplastics in a processing range of 90-300°C. The system can be operated with the following combinations: • Main unit (CoEx system) with coating unit • Main unit (CoEx system) without coating unit • Only coating unit with unwinding unit for carrier film For operation in the various combinations, the corresponding additional units are switched on or off. Possible layer structures: Main plant: - Monofilm with release film if required - 3-layer film (A-B-A) with release film if required Coating: - Monofilm on carrier material if req ...

; Gross weight [kg]: 2068; Engine: 1506A-E88TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

Centrifugal pump with magnetic coupling.

Vacuum pump manufactured by STERLING SIHI GMBH in 2002. DRYB 160016 GT model.

From linear to combination scales Application: Dosing free-flowing general cargo in accurate quantities. Characteristics of the scale • High accuracy • All parts in contact with the product are made of smooth 304 stainless steel • Simple operation, easy to clean and can be dismantled without tools • Control Panel: 7" Touch Screen • Low maintenance • Synchronization with all packaging machines possible Specifications • Number of weighing heads: 10 • Weighing container: 2,5l • Weighing range: 10 - 1000g • Accuracy: ± 1.0g - 1.5g • Speed: up to 60 sachets/min (depending on product) • Control panel: 7" touch screen display • Opening of the container flaps by means of stepper motors • Power: 230V / 1.3KW / 50(60)Hz / 10A • Dimensions (LxWxH): 1700mm x 1100mm x 1265mm • Machine weight: 380kg

Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

; Power [PS]: 359; Gross weight [kg]: 2854; Engine: Perkins 1506A-E88TAG5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 528

; Gross weight [kg]: 4667; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

Radial Drilling Machine NOVISA NTR 1600 Spindle: CM5 Spindle exit Travel: 350 mm Spindle speed: from 25 to 1900 RPM Arm travel: 1600 mm Mini height in low position: 800 mm Max height in height position: 1500 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1200 x 3000 mm Weight: approx 4 T

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Used spiral kneader DIOSNA, Type: SP 160 D -As good as new- - up to 160 kg dough / approx. 100 kg flour - Plastic cover available on request - Condition: Very good, ready for immediate use The kneader is in very good condition and is immediately ready for use. Viewing and test run are possible by arrangement.

Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1

; Gross weight [kg]: 3161; Engine: Perkins 2206A-E13TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Gross weight [kg]: 495; Engine: Perkins 403A-15G2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55

; Power [PS]: 15; Gross weight [kg]: 308; Engine: Perkins 403D-15G; Accessories: Tanker, Battery, Control Panel, Stahldach

Reducer Concentric Reducer Concentric 160/90 SDR 1

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

; Power [PS]: 120; Gross weight [kg]: 1295; Engine: Perkins 1104C-44TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 218

; Power [PS]: 120; Gross weight [kg]: 1254; Engine: Perkins 1104C-44TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 218

; Gross weight [kg]: 2100; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 289

; Gross weight [kg]: 2058; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral housing Centrifugal pump Manufacturer: Allweiler Type: NT40-160 Diameter: 136mm 30m³/h H: 30m 3500 rpm Electric motor: Manufacturer: Siemens Type: 1LAZ1302AA90-Z 6.3kw NEW, from warehouse resolution for more information see pictures.

; Power [PS]: 239; Gross weight [kg]: 2043; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 394

; Power [PS]: 272; Gross weight [kg]: 2782; Engine: Perkins 1506A-E88TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 528

; Power [PS]: 299; Gross weight [kg]: 2782; Engine: 1506A-E88TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 528

; Power [PS]: 326; Gross weight [kg]: 2854; Engine: Perkins 1506A-E88TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 528

Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg

thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale used angle head, angle milling head ŠKODA

Complete stainless steal Capacity: 1600 liters Basket dimensions: 190x105x80cm Dimensions of the machine: 340x100x180cm Delivery time: 30 days after advanced payment

; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 71

Qty. 1 Second-hand extrusion press Mfc.: FARREL Built: 1977 Type: hydraulic direct Force: 1600 Ton Billet dia.: 178 mm Billet length: 680 mm Container dia.: 185 mm Container length: 698 mm Operation pressure: 220 bar Fixed dummy block

turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck Multifix tool holder device tail stock coolant device Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 4575; Engine: Perkins 2206A-E13TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 888

; Power [PS]: 544; Gross weight [kg]: 5033; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 888

; Power [PS]: 54; Gross weight [kg]: 979; Engine: 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

; Gross weight [kg]: 5071; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

Spiral kneader Diosna SP 160 AD - extendable spiral kneader - for a maximum of 160kg of dough or.max 100kg of flour - with 2 timers - Automatic switching on and off via clocks - Stainless steel flour dust cover - 2 speeds (gears) - Boiler locking via pliers operated with hydraulics - suitable for almost all doughs - Vat capacity 260 liters

; Power [PS]: 658; Gross weight [kg]: 5554; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

; Power [PS]: 71; Gross weight [kg]: 993; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 145