ash 160 used for sale

Sideboard light grey approx. 160x85 cm, with similar sideboard approx. 160x85 cm, drawer container, white

Desk white approx. 160x80 cm, 2 swivel chairs

Office furniture white 2 desks each approx. 160x80 cm, 2 swivel chairs

Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm -Gearbox: Suga type SGM-1 -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg

DC motor, gear motor, electric motor, spur gear motor, manual transmission -Electric motor speeds: 160/1000/2500 rpm -Power: 5.1/32/32 kW -Volt: 100-400V -Protection class: IP 22 -Gearbox manufacturer Woerner type: MVD -hydraulic: switchable -Construction: B3 -Diameter shaft: Ø mm -Dimensions: 1430/1200/H750 mm -Weight: 1740 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer:Si Smiths Industries, hydraulic pump hydraulic unit -Type: 102680-13-24 -Voltage: 24 V -Pressure: 160 Bar -Dimensions: 160/130/H330mm -Weight: 10.1 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: McBull, multi-purpose cable pulley type CSZ16BODY with steel cable -Load capacity: 1600 kg -Steel cable: Ø 11 mm / length 20 m see photos -Cable pull: Dimensions 550/130/H310 mm -Number: 2x cable pull available -Price: per piece -Transport dimensions: 560/360/H180 mm -Total weight: 23.2 kg

Drawing line Composed of Lifting platform with scale SAMPSISTEMI BD 250 A reel handling unit Drawing machine SAMPSISTEMI RC 150 / MT 160 6A year 2017 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN200 Manual gearbox DIN160, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-649

Very good spiral mixer KEMPER, type: SPL 100 -completely overhauled- - for 100 kg flour or 160 kg dough - completely overhauled - New bearings, rhymes, time clocks, painting - with center rod - 2 speeds in forward or reverse gear - Machine kmplett overhauled, as good as new, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.

Distance between the clamps 470x470 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 900 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Attention! Pick up by appointment Auction-ID: A1-43992-18

Clamping Force: 160 Ton Maximum opening stroke: 450 mm Mould height: between 250 and 550 mm Distance between plates: 1000 mm Plate dimensions: 795x795 mm Distance between columns approx.: 520 x 520 mm Maximum weight supported: 1110 kg on the moving plate. Extraction stroke: 200 mm MORETTO Receiver-Hopper NOT included. With WEMO manipulator With SESOTEC metal detector Screw diameter: between 25 and 35 mm - not accurately detected Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate dimensions of the machine body: 5700×1600×3500 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-697

Sold without canalis Missing plastic bell Pressure plate to be replaced Auction-ID: A1-45422-35

4 UNITS/SETS OF SDM0068 PACKED TOGETHER. A SINGLE SDM0068 CORRESPONDS TO: Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0068 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-311

Brand: ZÜND Manufacturer: Zünd Systemtechnik AG (Switzerland) Model: XL-1600 + CVE16 Conveyor Type: CV-N25 Part Number: 3913077 Type of equipment Machine: Industrial Flatbed Digital Cutting Table Configuration: Table with continuous conveyor (belt) Usage: Automated multi-material cutting Condition & operation General condition: Good used condition Functional machine Zünd software installed Complete machine with control and peripherals Disassembly and loading to be carried out by the buyer Auction-ID: A1-45422-1

Operating conditions of this machine: unchecked. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-171

4 UNITS/SETS OF SDM0069 PACKED TOGETHER. A SINGLE SDM0069 CORRESPONDS TO: Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0069 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-288

4 UNITS/SETS OF SDM0068 PACKED TOGETHER. A SINGLE SDM0068 CORRESPONDS TO: Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0068 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-310

Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Handover: in its current condition as inspected -Speed control: Cover damaged, handwheel missing (see photos) -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

Professional outside micrometer with a range of 1600-1800 mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. Machine condition: unchecked. Approx. Transport dimension: LxWxH 2200 x 1660 x 160 mm; Approx. Weight: 90kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-455

Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

4 UNITS/SETS OF SDM0067 PACKED TOGETHER. A SINGLE SDM0067 CORRESPONDS TO: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 50-160 mm, Depth: 150 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. ...

4 UNITS/SETS OF SDM0069 PACKED TOGETHER. A SINGLE SDM0069 CORRESPONDS TO: Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0069 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-287

Rated load :1500kg. Load centre distance:500mm. Lift height:1600mm. Total height when lowered:2080mm. Max height after lifting:2080mm. Handle height form the ground:1200mm. Wheel:pu. Drive wheel size:ф210×80mm. Balance wheel size:ф100×55mm. Load wheel size:ф80×680mm. Total length(pedal no open):2070mm. Total width:800mm. Fork size（plank press):60x170x1100mm. Turning radius:1600mm. Lifting speed(no load/full load):0.08/0.1m/s. Falling speed(full load):0.15/0.12m/s. Drive speed(full load/no load):4.5/5km/h. Climbing ability(no load/full load):5/15%. Lift motor:2.2kW. Drive motor:1.2kW. Battery :24V/80Ah x1 Machine condition: unchecked. Approx. Transport dimension: LxWxH 780 x 1840 x 2080 mm; Approx. Weight: 370kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-80

4 UNITS/SETS OF SDM0068 PACKED TOGETHER. A SINGLE SDM0068 CORRESPONDS TO: Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0068 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-312

with large MDF board with a thickness of 22 mm Load capacity: up to 120 kg Functions: Offers numerous clamping options and mounting options for stationary devices. Auction-ID: A1-45495-296

4 UNITS/SETS OF SDM0069 PACKED TOGETHER. A SINGLE SDM0069 CORRESPONDS TO: Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0069 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-98

4 UNITS/SETS OF SDM0068 PACKED TOGETHER. A SINGLE SDM0068 CORRESPONDS TO: Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0068 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-307

4 UNITS/SETS OF SDM0067 PACKED TOGETHER. A SINGLE SDM0067 CORRESPONDS TO: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 50-160 mm, Depth: 150 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. ...

4 UNITS/SETS OF SDM0068 PACKED TOGETHER. A SINGLE SDM0068 CORRESPONDS TO: Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0068 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-309

Tube grinding/satin finishing machine - For sanding, satin finishing, and high-gloss polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5) Auction-ID: A1-45681-874

4 UNITS/SETS OF SDM0068 PACKED TOGETHER. A SINGLE SDM0068 CORRESPONDS TO: Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0068 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-308

Please note! The available forklift cannot load this machine, please bring your own suitable resources Auction-ID: A1-45188-1

4 UNITS/SETS OF SDM0067 PACKED TOGETHER. A SINGLE SDM0067 CORRESPONDS TO: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 50-160 mm, Depth: 150 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. ...

4 UNITS/SETS OF SDM0068 PACKED TOGETHER. A SINGLE SDM0068 CORRESPONDS TO: Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0068 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-115

Trolley 160 / 250 G with packaging material, 1 trolley with content food packaging PP approx. 1550 transparent cups 160 / 250 G with approx. 2000 lids 160 DG Auction-ID: A7-45675-42

4 UNITS/SETS OF SDM0067 PACKED TOGETHER. A SINGLE SDM0067 CORRESPONDS TO: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 50-160 mm, Depth: 150 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. ...

4 UNITS/SETS OF SDM0069 PACKED TOGETHER. A SINGLE SDM0069 CORRESPONDS TO: Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0069 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-290

Austrian vehicle documents, 80 km/h registration Auction-ID: A1-45690-1

Fliegl PFW 16000 – Slurry tanker 16,000 l with dribble hose distributor General data • Machine type: Slurry tanker • Manufacturer: Fliegl Agrartechnik GmbH • Model: PFW 16000 • Year of construction: 2019 • Capacity: 16,000 l • Permissible Total weight: 23,000 kg • Condition: used Technical equipment • Tandem axle • Air brake system • Tyres: 750/60 R 30.5 • Hydraulic drawbar suspension • Suction connection 6\" left and right with automatic hydraulic shut-off • 4,000 l Armatec pump • Drag hose distributor \"Skate 150\" • Working width: 15 m • Distributor with half-side switch • Piano controls available Condition • Optical condition: used, usual signs of wear present • Technical condition: functional • Ready to use Powerful slurry tanker with modern spreading technology and high efficiency – ideal for efficien ...

3 UNITS/SETS OF ATT0029 PACKED TOGETHER. A SINGLE ATT0029 CORRESPONDS TO: Chuck for self-centering lathe 3 + 3 jaws 160 mm, 2500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 230 x 200 x 150 mm; Approx. Weight: 9kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0029 PACKED TOGETHER: 230 x 600 x h150 mm - 27 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-373

4 UNITS/SETS OF SDM0067 PACKED TOGETHER. A SINGLE SDM0067 CORRESPONDS TO: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 50-160 mm, Depth: 150 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. ...

4 UNITS/SETS OF SDM0069 PACKED TOGETHER. A SINGLE SDM0069 CORRESPONDS TO: Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0069 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-292

3 UNITS/SETS OF ATT0029 PACKED TOGETHER. A SINGLE ATT0029 CORRESPONDS TO: Chuck for self-centering lathe 3 + 3 jaws 160 mm, 2500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 230 x 200 x 150 mm; Approx. Weight: 9kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0029 PACKED TOGETHER: 230 x 600 x h150 mm - 27 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-374

3 UNITS/SETS OF ATT0029 PACKED TOGETHER. A SINGLE ATT0029 CORRESPONDS TO: Chuck for self-centering lathe 3 + 3 jaws 160 mm, 2500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 230 x 200 x 150 mm; Approx. Weight: 9kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0029 PACKED TOGETHER: 230 x 600 x h150 mm - 27 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-375

4 UNITS/SETS OF SDM0069 PACKED TOGETHER. A SINGLE SDM0069 CORRESPONDS TO: Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0069 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-291

3 UNITS/SETS OF ATT0029 PACKED TOGETHER. A SINGLE ATT0029 CORRESPONDS TO: Chuck for self-centering lathe 3 + 3 jaws 160 mm, 2500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 230 x 200 x 150 mm; Approx. Weight: 9kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0029 PACKED TOGETHER: 230 x 600 x h150 mm - 27 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-270

KraussMaffei 50-160 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-160 C1 Year of manufacture: 1996 Serial number: 44461 Screw diameter: ~25 mm (some units have 30 mm variants) Injection volume: 101 cm³ Injection pressure: 1488 bar Closing force: 500 kN Mould opening stroke: 350 mm: 200 mm – 550 mm Electric connection: 400 V Machine weight: 2300 kg Total dimensions (L x W x H): 3191 x 1500 x 1887 mm Clamping plate size: 540 x 540 mm Tie-bar spacing (H x V): approx. 321 x 321 mm Mould height (min/max): approx. 200/550 mm Shot volume: approx. 52 cm³ (standard) Shot weight: approx. 47 g (PS equivalent) Injection weight: 92 g Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-3

Chip extraction FELDER RL 160 built in 2014, 3.0 kW 400 V, max. 3,200 m³/h, dead weight approx. 290 kg, S/N 310500814

Forklift tine extension approx. 160x14b cm (1 pair)

Desk wood décor light approx. 160b cm, base anthracite, integrated LED design lamp