ash 160 used for sale

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

end mill, end mill, milling cutter -Outer diameter: 160 mm -Teeth: 16 -needs to be reground -Weight: 10 kg

Rolling jaws, floating center jaws, low-profile jaws -Dimensions: 160/31/H63 mm -Weight: 3 kg

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 128 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 160 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 230.9 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/volvo-td710g-generator-160kva- used/389, , = More information =, , Empty weight: 2.030 kg, Type number: TD710G GENERATOR 160KVA

electric motor, three-phase motor -Engine: unused -Power: 18.5 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Design: B3/B5 -Protection class: IP 55 -Quantity: 6 pieces available -Price: per piece -Weight: 110 kg/piece

Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece

Engine Brand: DAF, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 116 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 160 , Generator Hz: 50 , Generator Volts: 380/220 , Generator Amps: 243 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/daf-dk1160mg-generator-160kva- used/321, , = More information =, , Empty weight: 1.760 kg, Type number: DK1160MG GENERATOR 160KVA

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Heat exchanger: Oil cooler, shell and tube heat exchanger -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg

Dematic conveyor system roller conveyors 16000-600-540 RA2340 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of manufacture: unknown Available conveyor lengths (FL): 16000 mm Stowage space size: 750 mm Nominal/outer width (NB): 600 mm Condition: good (used) Roller width (RB): 540 mm Roller pitch: 125 mm variable Drive types: SEW geared motor Weight of conveyed goods: up to 30 kg Stowage mechanism: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g: additional elements to expandable frequency converter supports lateral guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric  ...

Granit marble Length: 1510 mm Width: 1005 mm Thickness: 160 mm Height on feet: 1015 mm Weight: approx 0,5 T

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 180 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2000 mm turning diameter over slide rest: 1600 mm turning length: 10000 mm control: FANUC 0i TF workpiece weight: 25 t steady: 4 feed: 1 - 3000 mm/min main drive: 60 kW main spindle speeds:: 1,5 - 160 U/min bed width: 1150 mm faceplate: 1600 mm tail stock: tailstock quill diameter: 260 mm total power requirement: 110 kW weight of the machine ca.: 120 t the machine is currently being overhauled and equipped with - new electrics (Siemens, Schneider, cabinet) - CNC control FANUC 0i TF - new Fanuc motors - new hydraulic parts - complete mechanical overhaul - Ball screw (B-axis) - bed overhaul - three-track bed - Grinding device 1500 rpm - Milling Unit - Face plate with 4 jaws - 3 steady rests - incl 1 year warranty from overhauler on electrical and hydraulic components and 2 years on FANUC CNC Completion of overhaul after order (approx. 2 months) The data for th ...

Batch Mixer, Ploughshare Batch Mixer, 1600l Capacity, 22kw

max. wheel diameter: 160,175 mm gear width: 355 mm max. module: 4,5 spindle bore: 75 mm centre distance: 410 mm min. number of teeth: 2, 3 cutter diameter max.: 115 mm cutter length max.: 105 mm axis distance between cutter and workpiece - max.: 138 mm axis distance between cutter and workpiece - min.: 30 mm milling head -swivable: 120 ° milling spindle speeds: 70 - 400 U/min axial-feeds: 0,25 - 4,0 mm/U radial feeds: 0,09 - 1,5 mm/U total power requirement: ca. 9,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electro Foam cutter Make Neolt Model Ekectro Foam 160 Year 1999 Max Size 45up to 160 cm Thickness up to 30 mm Details Electric knife movement, electric clamping, with second cutting head, will cut Foam & Forex Available direct

Stainless steel pump body + pump impeller, 40-160, Lowara, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Scope of delivery: 1 piece stainless steel pump impeller, SH/FH 40 D171 S2, 150784350, second-hand top, original price € 448 excl. 1 piece stainless steel pump body, CRP SH40-160 DIN-JIS, 151380090, second-hand top, original price € 1025 excl. VAT, pump body, cover motor side, cover suction side + connection. Seals mostly present, screws missing. Bellhousing and pump mounting bracket (blue) free of charge Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the ...

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

Transnorm curved belt conveyor right 160°-780-600-IR600 RA2018 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: broken belt Motor: will be changed conveying angle: 160° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 160° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 scope of del ...

Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive, multi-axis controller -Manufacturer: Gessmann, Joystick Multi Axis Controller -Type: 0208873 EP/160 -Quantity: 1x Joystick available -Dimensions: 83/83/H165 mm -Weight: 0.6 kg

Pressure: 10 bar Motor: 1,3 kW Free air delivery: 0,162 m³/min Measurement (WxHxD): 1510 x 1210 x 580 Weight: 157 kg Compressed air connection: 1/2

1993 BAT PVC.PLCR.1600X325/93 Cutting system Extension length: 15.00m Cutting width max. 3.00m Programmable lengths, automatic extraction and cross-section of specified quantities and lengths Roll paternoster for 50 rolls Find more here - / Contact us at -

Key data: 160 mm, 2 kW, 1770 m³/h

mobile chip extraction system AL-KO FMRG 1/160 Manufacturer Part Number: 4172370/2

Specifications: Working length: 1600 mm Pressing force: 32 tons CNC Control: TS1 2D Simulation Touch Screen Controlled axes: Y1/Y2; X Mot. adjustable back gauge Stroke: 215 mm servo-electric drive Crowning Tool clamping: WILA system Working height: 910 mm Motor power : 6 kW Dimensions (length x width x height): approx. 2000 x 1900 x 2100 mm Weight: approx. 3,3 tons Accessories: 1 set of new tools

Manufacturer: HYDRAP Model: HPDZB 160 Year of Manufacture: 1986 Type of Machine: Hydraulic Press Nominal Force: 178 kN Stroke Length: 500 mm Voltage: 380 V Frequency : 50 Hz Nominal Power: 17.5 kW Current : Alternating Current (A) Weight: 7.5 tons Oil Viscosity : Unknown Maximum Load : 178 kN Safety Distance): Not provided Oil Quantity: 125 liters Weight : 23.000 kg Find more here - / Contact us at -

table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic Transfer Switch - ATS Panel - ATI Panel, 160 Ampere - Applicable for generators up to 110 kVA; Gross weight [kg]: 60

FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t

Spiral mixer Diosna Model: SP 160 D Dough machine with 2 courses, 2 clocks Stainless steel boiler + stainless steel spiral Flour dust cover Rewind button for max. 100/160 kg flour/dough depending on the TA Machine Mobile with 2 brakes Connection 400V, 16A, 32A-CEE plug DGUV V3 tested Used machine overhauled 6 months warranty Option: Maintenance contract Warranty 9 months E-Box Service Package Delivery Instruction & Commissioning We have many more TOP spiral mixers in stock!

Diosna Spiral Mixer Model: SP 160 AD with 2 extendable tank cars Kneading machine for max. 160 kg dough depending on TA Cover with switch ring with 2 timers and 2 gears Lifting and lowering via control Connection 400V, 9.7 kW, 22.2 A., 32A-CEE plug DGUV V3 tested Used machine overhauled with 6 months warranty Option: Maintenance contract Service Package Delivery & Floor Fastening Instruction & Commissioning Many more spiral mixers in stock!

Diosna Spiral Mixer Model: SP 160 D Dough machine with 2 courses, 2 clocks Stainless steel boiler + stainless steel spiral Flour dust cover Rewind button for max. 100/160 kg flour/dough depending on the TA Machine Mobile with 2 brakes Connection 400V, 16A, 32A-CEE plug DGUV V3 tested Used machine overhauled 6 months warranty Option: Maintenance contract E-Box Service Package Delivery Instruction & Commissioning Visit our large spiral mixer exhibition!

Spiral mixer Diosna Model: SP 160 D Dough machine with 2 courses, 2 clocks Stainless steel boiler + stainless steel spiral Flour dust cover silo version Rewind button for max. 100/160 kg flour/dough depending on the TA Machine Mobile with 2 brakes Connection 400V, 20A, 32A-CEE plug DGUV V3 tested Used machine overhauled 3 months warranty + service Option: Maintenance contract E-Box Service Package Delivery Instruction & Commissioning You can find more TOP spiral mixers in our large exhibition!

thickness of jaw: 160 mm daylight opening: - total power requirement: - weight of the machine ca.: 115 - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SNA-20. Cooling Water Pump System - Room K 06, Cooling Water Pumps Partial system, 4 pumps with motor type NB25-160/140, Built: 1990 Complete system, functional Manufacturer: Allweiler AG Radolfzell Technical Data: - 10 m³/h - 1.1 kW - 2900 rpm - Head 20m - Motor Siemens MA 70962 BA11-Z, Built: 2004, 1.8 kW; 400V, 3.9A; 2880 rpm - Pressure vessel EXTROL 2073-146, Built: 1990 - Manufacturer: ATROL; Volume 180 l; 5 bar Find more here - / Contact us at -

pressure: 160 t stroke: 400 mm dayligth: 900 mm Heads: 225x135 mm feed down: 6,2 mm/sec feed up: 9,8 mm/sec total power requirement: 6 kW weight of the machine ca.: 1.300 kg dimensions of the machine ca.: 1640x1000x2550 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Condition: Presentation Machine - Usable Volume: 160 L - incl. Control - incl. Pump to empty out