132,173 used machines on RESALE, but how to find them? Machine Search
PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Cloos, mains interference filter -Type: NEF FS5825 -Dimensions: 265/75/H50 mm -Weight: 0.7 kg
PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter -Manufacturer: Okaya, Noise Filter -Type: 3SUP-HL200-ER-6 -Voltage: 3x 500V 200A 50/60Hz -Dimensions: 480/200/H200 mm -Weight: 20 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: 6 sets of top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Shipping/Price: complete -Dimensions total: 285/240/H85 mm -Total weight: 24.4 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Dimensions total: 95/65/H70 mm -Total weight: 2.1 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 22 mm -Number: 2 sets of top jaws available -Price: per set -Dimensions total: 105/65/H45 mm -Total weight: 2.0 kg/set
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 32 mm -Number: 2 sets of top jaws available -Price: per set -Dimensions total: 90/95/H55 mm -Total weight: 2.1 kg/set
Castor, swivel castor, transport equipment castor, fixed castor, heavy-duty castor, built-in wheel, solid rubber wheel -Built-in wheel: solid rubber wheel, steel rim with roller bearing, 2 pieces -Load capacity: 250 kg -Wheel: Type 250/60-130 Ø 250 mm -Hub: Ø 25 x 75 mm -Shipping/Price: complete -Dimensions each: Ø 250 x 75 mm -Weight: 3.6 kg/piece
Lightbus combined input/output module, input/output module, parallel input/output, analog output, input module, Lightbus analog input module -Manufacturer: tac, Input/Output module for DIN rail -Type: TAC Xenta 422 -Input voltage: 24 V DC -Number: 3 modules available -Price: per piece -Dimensions: 110/90/H80 mm -Weight: 0.3 kg/pc.
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Dimensions total: 90/80/H70 mm -Total weight: 1.9 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Dimensions total: 115/78/H70 mm -Total weight: 3.2 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck -Jaw width: 26 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Dimensions total: 110/79/H66 mm -Total weight: 2.9 kg/set
Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Manufacturer: Siemens, Sinamics Active Interface Module 36kW -Type: 6SL3100-0BE23-6AB0 A5E37181752 FS: E -Input 3 AC 380-480 V 50/60 Hz -Number: 4x available -Price: per piece -Dimensions: 485/150/H270 mm -Weight: 17.7 kg/piece
Sewing machine, industrial sewing machine, industrial sewing machine, motor control for industrial sewing machine, motor control box, motor controller -Manufacturer: Vetron, Motor Control Box for industrial sewing machine -Type: YSC-8340 -Voltage: 230V -Number: 13x control available -Price: per piece -Dimensions: 280/130/H310 mm -Weight: 4.4 kg/piece
Position computer, computer, control unit, robot controller, controller, CNC controller, operator panel, computer monitor, screen, TFT industrial monitor, front panel -Manufacturer: Nucleus, Monitor (ECO) -Item No.: FR366104 -Number: 7 monitors available -Price: per piece -Dimensions: 245/110/H25 mm -Weight: 0.3 kg/pc.
Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: cleancraft, industrial vacuum cleaner type wetCAT 131 IRH -Connection: 230 volts -Power: 2.4 kW -Dimensions: 500/470/H1100 mm -Weight: 10 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Röhm, Top jaw set, rotary jaw set, 4-piece, for chuck size Ø160 mm, 2 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 160/70/H50 mm -Total weight: 1.9 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set, drill jaw -Manufacturer: Röhm, drill jaw BB, size 200, 4-jaw set, 2 sets -Type: 110068 -Jaw width: 20 mm -Dimensions: see photo technical drawing -Price/Sale: only complete set -Overall dimensions: 160/70/H53 mm -Total weight: 2.8 kg
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Oerlikon, Inverter welding machine type CITISTICK 160 -Welding current range: 5-160A -Mains connection: 230V -Accessories: Welding cable with electrode clamp, ground cable -Dimensions: 430/300/H340 mm -Weight: 11 kg
Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: Wap, Industrial vacuum cleaner, 2-motor wet/dry vacuum cleaner -Type: turbo M2 -Connection: 220...240 volts -Power: 1400...1600 W -Dimensions: 700/600/H1070 mm -Weight: 30 kg
Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S7 ET 200SP Interface Module -Type: 6ES7 155-6AU01-0CN0 -Number: 2 modules available -Price: per piece -Dimensions: 115/45/H75 mm -Weight: 0.1 kg/pc.
PLC control, digital output, digital input, digital input module -Manufacturer: Siemens, SIMATIC S7, Digital Input Module with Base Unit -Type: 6ES7 131-6BF01-0BA0 6ES7131-6BF01-0BA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP20-0BA0 -Number: 8 modules available -Price: per piece -Dimensions: 140/20/H75 mm -Weight: 0.1 kg/pc.
Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S7 ET 200SP Interface Module -Type: 6ES7 155-6AU01-0BN0 6ES7155-6AU01-0BN0 -Number: 3 modules available -Price: per piece -Dimensions: 115/45/H75 mm -Weight: 0.15 kg/pc.
Inkjet printers, label printers, barcode printers, printers, logistics labeling systems, inkjet printers, thermal inkjet printers, control units for inkjet printers -Handover: in its current condition as inspected -Condition: According to the display, the device needs cleaning. -Manufacturer: Keyence, inkjet printer with accessories -Type: MK-G1000 -Touch panel: MK-P5 -Individual components/accessories: see photos -Submission/Price: complete -Transport dimensions: 465/380/H630 mm -Weight: 58 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 180/135/H125 mm -Weight: 19.5 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 162/174/H175 mm -Weight: 18.8 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 167/135/H93 mm -Weight: 10.7 kg
PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter, ferrite adapter, ferrite filter -Manufacturer: Reis Robotics, Ferrite Adapter Filter, Ferrite Filter -Type: unfortunately without a type designation -Number: 3 filters available -Price: per piece -Dimensions: 150/140/H80 mm -Weight: 0.7 kg/pc.
Inkjet printer, label printer, printer, printer cartridge, print cartridge, ink cartridge -Handover: in its current condition as inspected -Best before: 09/2021 -Manufacturer: REA Elektronik, REA JET HR Multiple Black ink cartridge -Item No.: 054.980.201 -Color: black -Number: 39 cartridges available - Price: per piece -Cardboard dimensions: 120/60/H25 mm -Weight: 0.1 kg
Inductive sensor, electronic sensor, proximity switch, proximity sensor, proximity transmitter -Manufacturer: Telemecanique, Inductive sensor proximity switch, unused, original packaging -Type: XSA-H05313D -Quantity: 13x Available -Price: per piece -Cardboard dimensions: 140/45/H45 mm -Weight: 0.2 kg/pc.
Key data: 6 kN, 2582 g/PS, 90 mm
Tederic NEO H680-i4800 – Two-platen injection molding machine Exhibition piece with minimal operating hours – excellently equipped! This machine is a former pilot plant and demonstration device that was used exclusively for demonstration and test purposes. Accordingly, the The machine has hardly any operating hours and is in excellent condition. The extensive equipment goes far beyond the standard. --- Technical data - Clamping force: 680 t (6,669 kN) - Year of construction: 2022 - Injection unit: i4800 - Screw diameter: 90 mm - Injection weight (hp): 2,582 g - Injection volume: 2,837 cc - Spec. Spray pressure: 1,615 bar - L/D Ratio: 20.8 - Clamping plates: 1,500 x 1,400 mm - Handlebar spacing: 1,100 x 960 mm - Ejector force: 182 kN - Tool installation height: 450 mm - Opening travel: 1,400 mm - Max. panel spacing: 1,850 mm - Ejector trave ...
Manufacturer: Koch, Type: BD 61 PTP, Year: 1996, Control: Beckhoff, Software: Beckhoff, Working width min-max mm: 50-1200, Min.-max. workpiece thickness in mm: 10-50, Drilling support horizontal: 1, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of drill spindles: 1, Drilling engine kW: ca.1,0, Working range max mm: 60, Axis-controlled: X/Z, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Elektronische : yes, Dowel monitoring: yes, Glue high-pressure pump: Niededruck, Glue quantity setting: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dowel size mm: 8, Drilling depth: 45, Drilling hight: 50, Year :1996
Ingredient trolley with 9 tubs Stainless steel version with 4 swivel castors Used device cleaned
Key data: 4200 kN, 1090 g/PS, 70 mm
Demag Ergotech 420/800 2300 with embossing function and Robot Wittmann DR 633/CNC 6-316 Prices are at: inventar-verkauf.de/id/alesco Details: Clamping force: 4200 KN Handlebar width: 800 x 710 mm Mold opening: 710 mm Control Ergocontrol NC 4 Connected load: 68KW Total dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Robot Wittmann DR 633/CNC 6 - 316 (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-fold core pull 2 I/O Embossing function retrofitted 2 x Injection Unit: Injection Unit 1 Weft volume: 891 cm Weft weight: 800gr (polystyrene) Screw diameter 60mm Injection pressure 2420 bar Injection Unit 2 Weft volume: 1212 cm Weft weight: 1090gr (polystyrene) Screw diameter 70 mm Injection pressure 1877 bar WITHOUT COOKING VACUUM CLEANER and CLAMPING DEVICE.
For sale is a small complete filling line for vinegar or oil in plastic bottles. Currently, the line is at 0.75 ltr. cylinders and has a maximum output of 4,000 bottles/h. The entire plant consists of the machines listed below: 1. Bunker for empty plastic bottles, about 6m long, capacity: about 400-600 containers 2. Kamman bottle sorting system type K23F Machine ensures that the bottles to be filled are transported out of the machine vertically, with the mouth facing upwards Sorting capacity: approx. 3,000-6,000 pieces/h 3. Conveyor belts 4. Leicht vacuum filler, make Cobert type Olimpia20/95 With 20 filling stations Dimensions: LxWxH: 1,520x1,250x2,330 mm Possible bottle diameter: 55-120 mm Built in 1989 6. Inkjet encoder, make REA-JET, for applying the lot marking or best-before date coding to the filled and sealed bottle Year 2008 5. Capper for plastic c ...
Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.
Color: Yellow Original packaging Price per unit = 15.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment
Retus PSM 24/48 brine injector, injector with 24 double needles, Drive and pump can be switched separately, 2 belt speeds, Connection 400V, dimensions LxWxH approx. 187x70x185cm, weight approx. 290kg, Year of manufacture 2018, very good used condition, fully functional, Swiss make
used
SILO CELL BLOCK DAM WALL SCREW GALVANIZED Hopper with access hatch IMMEDIATELY AVAILABLE Mob. +491715213204
Injector Günther PI 17; Curing injector with 17 needles, with new hoses and clamps, instruction manual, Connection 400V, dimensions LxWxH approx. 140x58x180cm, weight approx. 262kg, Year of manufacture 2003, very good used condition, runs perfectly
approx. 1,000 pieces stacking racks for industrial pallets, galvanized, 1 to., stackable 4 times - used -: Price per piece from location: only 75.-€ (net)! Price per piece for a purchase of 100 pieces or more: only 65.-€ (net), from location: Manufacturer: Reimuth GmbH Type: Grey Year of Make: 1992 Height: approx. 1.90m A frame consists of two frame parts (2 x one "L") that are joined together to form a frame (industrial pallet). All without screws, only with hinges. Permissible. Payload 1 to. Permissible. Load: 4 tons. Stackable, max. 4 times Hot-dip galvanized Sale without industrial pallet Condition: good Available: immediately Location: 73079 Süßen
Key data: 600 kN, 94 g/PS, 30 mm
Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4
Key data: 600 kN, 94 g/PS, 30 mm
Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4
Key data: 1750 kN, 393 g/PS, 50 mm
Clamping force: 175t Year of Make: 2005 Injection weight in hp: 393g Injection Unit .../1000 Screw diameter 50 mm Spec. Spray pressure 2304 bar Injection volume 432 cc Injection weight in hp 393 g L/D Screw Ratio 22 Clamping unit 175/... Clamping force 175 t Size of the clamping plates 915 x 910 mm Lights spar spacing 560 x 560 mm Tool installation height 350 mm Opening way 700 mm Max. panel spacing 1050 mm Ejector path 200 mm Weight 9000 kg Dimensions(m) LxWxH 5.2 x 1.75 x 2.2 m Year of construction 2005 Control type MC4
Key data: 2000 kN, 55 mm
Clamping force: 200t Year of Make: 2002 Injection Unit .../675 Screw diameter 55 mm Spec. Spray pressure 2080 bar Injection volume 427 cc Clamping unit 2000/... Clamping force 200 t Size of the clamping plates 950 x 950 mm Lights spar spacing 570 x 570 mm Tool installation height 300 mm Opening way 650 mm Max. panel spacing 950 mm Year of construction 2002 Control type Selogica
Key data: 2400 kN, 594 g/PS, 55 mm
Injection Unit .../1330 Screw diameter 55 mm Spec. Spray pressure 2041 bar Injection volume 653 cc Injection weight in hp 594 g L/D Screw Ratio 22 Clamping unit 240/... Clamping force 240 t Size of the clamping plates 910 x 930 mm Lights spar spacing 630 x 570 mm Ejector force 59 kN Tool installation height 350 mm Opening way 725 mm Max. panel spacing 1075 mm Ejector path 200 mm Weight 10000 kg Dimensions(m) LxWxH 5.5 x 1.8 x 2.4 m Year of construction 2013 Control type Unilog B6
Key data: 6500 kN, 80 mm
Clamping force: 650t Year of construction: 2024 Injection Unit .../4630 Screw diameter 80 mm Spec. Spray pressure 2090 bar Injection volume 2212 cc Hydr. Drive power 113 kW L/D Screw Ratio 22 Clamping Unit 6500/... Clamping force 650 t Lights spar spacing 1040 x 910 mm Ejector force 110 kN Tool installation height 400 mm Opening way 950 mm Max. panel spacing 1350 mm Ejector path 250 mm Weight 27000 kg Year of construction 2024 Control type KEBA 2985 Clamping unit Two-plate technology – hydraulic clamping force Fast tool movement due to two diagonal cylinders Tool protection function Linear guide for BWAP (MAIII PLUS, MA-F) Set of spray nozzles Closing and opening of the mold (max. 5 stages, min. 3 stages) Tool height limitation via limit sensor Clamping plates according to Euromap standard Ejector reset function Display of ejector p ...
Intensive batch mixer with a usable filling per batch of 500 l. / 800 kg (max.), emptying via central bottom flap (hydraulically operated), tools: star whirler, mixing star with two blades and wall-to-bottom scraper. Agitator drive: 45.0 kW via V-belt (speed can be controlled via FU), drum and mixing star drive: 13.5 kW, hydraulic unit: 2.2 kW for lock actuation. Includes modern control cabinet with programmable control. Mixer completely overhauled in 2016. Available for an extra charge: Comfortable mixer platform / steel substructure incl. drawings and statics.
Caterpillar C9.3B - Unused - 415 HP - arr. 547-7363
maximum number of results exceeded
please refine your search
